GODIAG GT113

Contents

GODIAG GT113 Universal Fuel Injector Tester & Cleaner Kit

Model: GT113

1. Product Overview

The GODIAG GT113 is a versatile tool designed for testing and cleaning fuel injectors in various vehicles, including cars and motorcycles. It features multiple pulse modes and comes with a range of adapters to accommodate different injector types. This kit helps accurately detect injector performance, diagnose faults, and ensure optimal engine operation.

GODIAG GT113 Fuel Injector Tester Kit with carrying case and accessories

Figure 1: GODIAG GT113 Fuel Injector Tester Kit with accessories and carrying case.

Key Features:

  • Universal Compatibility: Includes 6 sizes of cleaning adapters suitable for 12V and below 12V injectors (EFI, GDI, FSI, MPFI, SPFI, TBI, CFI, L-JET, LPG, K-Jetronic, coil-type direct, motorcycle injectors).
  • Multiple Pulse Modes: Offers 8 pulse modes, including Short, Medium, Long, and Continuous pulse modes, with selectable 12V/5V power drive levels.
  • LCD Display & Indicators: Clear LCD display shows the selected pulse mode, and indicator lights confirm pulse output status.
  • Simultaneous Testing: Equipped with 4 pulse output terminals, allowing two fuel injectors to be tested concurrently.
  • Safety Protections: Features reverse polarity protection and short circuit protection to safeguard the device and user.
  • Durable Construction: Test leads and power cords are made of high-quality silicone for flexibility and abrasion resistance.

Package Contents:

  • 1 x GODIAG GT113 Fuel Injector Tester
  • 2 x Battery Clamps
  • 6 x Cleaning Adapters (various sizes)
  • 1 x English Manual
  • 1 x Carrying Bag

2. Setup Instructions

2.1 Powering the Device

  1. The GODIAG GT113 can be powered by a 12V vehicle battery or an external DC 12V power adapter (recommended at least 1.5A).
  2. Connect the red battery clamp to the positive (+) terminal of the 12V power source and the black battery clamp to the negative (-) terminal.
  3. Important: Ensure correct polarity. The device has reverse polarity protection, but incorrect connection should be avoided.

2.2 Connecting Injectors

  1. Select the appropriate cleaning adapter from the 6 provided sizes that matches your fuel injector.
  2. Connect the fuel injector to the chosen adapter.
  3. Connect the adapter/injector assembly to one of the pulse output terminals on the GT113 tester. The tester can accommodate up to two injectors simultaneously.
  4. Caution: This tool is designed for gasoline engines only. Do not use with diesel engines.
Product Structure diagram of the GODIAG GT113, labeling components

Figure 2: Product Structure with labeled components.

  • Pulse output terminals: Connect the injector test leads here.
  • DC 12V input: Power input for the device.
  • Voltage indicator lights: Indicate the selected voltage (5V or 12V).
  • Output status indicator lights: Flash to show pulse output activity.
  • Operation mode indicator light: Shows the active pulse mode.
  • Battery clamps: For connecting to a 12V vehicle battery.
  • Mode switch button (M): Cycles through pulse modes.
  • Voltage switch button (Voltage): Toggles between 5V and 12V output.
  • Start/Stop button: Initiates or halts the testing process.

3. Operating Instructions

3.1 Selecting Pulse Mode and Voltage

  1. After connecting the power and injectors, press the 'M' (Mode) button to cycle through the 8 available pulse modes. The selected mode will be displayed on the LCD screen.
  2. Press the 'Voltage' button to switch between 5V and 12V output. Ensure the selected voltage matches the requirements of the injector being tested.

3.2 Starting and Stopping the Test

  1. Once the desired pulse mode and voltage are set, press the 'Start/Stop' button to begin the injector test.
  2. The output status indicator lights will flash rapidly, indicating that pulses are being sent to the injectors.
  3. To stop the test at any time, press the 'Start/Stop' button again.

3.3 Interpreting Results

Observe the spray pattern and volume of the fuel injectors during the test. Irregular spray patterns, drips, or inconsistent fuel delivery across multiple injectors may indicate a fault or clogging. The ability to test two injectors simultaneously allows for direct comparison of their performance under identical conditions.

4. Maintenance

4.1 Cleaning

  • After each use, wipe the device and accessories with a clean, dry cloth.
  • Ensure no fuel or cleaning agent residues remain on the adapters or terminals.
  • Do not use abrasive cleaners or solvents that could damage the device.

4.2 Storage

  • Store the GODIAG GT113 and its accessories in the provided carrying bag when not in use.
  • Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Ensure all cables are neatly coiled to prevent damage.

5. Troubleshooting

5.1 Device Not Operating

  • Check Power Connection: Ensure the battery clamps are correctly connected to a 12V power source with the correct polarity.
  • Short Circuit Protection: If the output terminals are short-circuited (e.g., two ends connected together, or two red/black wires used to connect a single injector), the device will not operate. Correct the connection.
  • Power Source Adequacy: Verify that the 12V power source can supply at least 1.5A.

5.2 Inconsistent Injector Performance

  • Cleaning Required: If an injector shows poor spray patterns or reduced flow, it may require cleaning. Note that the kit does not include cleaning agent.
  • Adapter Fit: Ensure the correct size adapter is used for a secure and leak-free connection to the injector.
  • Voltage Setting: Double-check that the correct voltage (5V or 12V) is selected for the specific injector type.

6. Specifications

Attribute Value
Brand Name GODIAG
Model Name HKSO794 (GT113)
Item Type Other (Diagnostic Tool)
Voltage 12V
Power (W) 8W
Item Weight 0.2 kg
Item Height 12 cm
Item Width 11 cm
Item Length 12 cm
Material Best Quality
Certification CE
External Testing Certification ce
Origin Mainland China
Package Length 20 cm
Package Width 15 cm
Package Height 9 cm
Package Weight 0.498 kg

7. User Tips

  • Compare Injectors: When testing multiple injectors, utilize the simultaneous testing feature to compare their spray patterns and flow rates side-by-side for easier fault identification.
  • Correct Voltage: Always confirm the required operating voltage (5V or 12V) for your specific fuel injectors before testing to prevent damage.
  • Gasoline Engines Only: Remember that this tool is exclusively for gasoline engines and should not be used with diesel injectors.
  • External Power: For prolonged testing or cleaning, using a stable external DC 12V power adapter (at least 1.5A) is recommended over a vehicle battery to ensure consistent power supply.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided by your retailer or contact the manufacturer directly. The package includes an English manual for detailed instructions.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.