LEHX SM6225

Contents

LEHX SM6225 Smart AI Box User Manual

Model: SM6225 | Brand: LEHX

1. Introduction

Thank you for choosing the LEHX SM6225 Smart AI Box. This device upgrades your car's infotainment system with Android 13, wireless CarPlay, and Android Auto functionalities. It features an 8-core processor, 4G connectivity, built-in GPS, and access to the Google Play Store, allowing you to enjoy a wide range of applications and enhanced navigation directly on your car's display.

Before installation, please ensure the product is in good condition. Due to potential impacts during transit, it is recommended to test the unit before permanent installation.

2. Package Contents

Verify that all the following items are included in your package:

  • LEHX SM6225 Smart AI Box Unit
  • USB to Type-C Cable
  • Type-C to Type-C Cable
  • USB to USB Cable
  • User Manual (this document)
Contents of the LEHX SM6225 Smart AI Box package, showing the main unit and various USB cables.
Figure 2.1: Package Contents (AI Box unit, USB to Type-C, Type-C to Type-C, USB to USB cables)

3. Specifications

FeatureDescription
Brand NameLEHX
ModelSM6225
Operating SystemAndroid 13.0
ProcessorQualcomm Snapdragon 6225 (8 Cores: Cortex-A73*4 + Cortex-A53*4)
GPUAdreno 610
RAM Options4GB / 8GB
ROM Options64GB / 128GB
Connectivity4G SIM Card Support, WiFi Hotspot
NavigationBuilt-in GPS
App StoreGoogle Play Store
Wireless FeaturesWireless CarPlay, Wireless Android Auto
OriginMainland China
Diagram showing the Qualcomm Snapdragon 6225 chip with CPU, GPU, RAM, and ROM specifications.
Figure 3.1: Internal Chip Specifications (Qualcomm Snapdragon 6225)

4. Installation

4.1 Before Installation

Upon receiving the product, do not install it directly into your car. The product may be affected by a long journey. Please test the unit thoroughly before proceeding with the installation.

4.2 Rear Interface Description

Familiarize yourself with the power plug and rear interface connections:

  • Power Supply: Yellow (B+) for constant +12V, Red (ACC) for ignition switch, Black (GND) for ground.
  • Speaker Outputs: White/White-Black (Front Left), Gray/Gray-Black (Front Right), Green/Green-Black (Rear Left), Purple/Purple-Black (Rear Right).
  • Other Connections: ILLUMINATION (Orange) for backlight, REVERSE (Pink) for reversing camera control, KEY1/KEY2 (Orange/Black, Brown) for steering wheel control, ANT (Blue) for auto antenna power.

Important: When the yellow B+ and red ACC lines both receive 12V positive power, the unit will turn on. The yellow B+ line maintains power for memory function. Ensure speaker cables are not grounded, shared, or touching other lines to prevent sound distortion or unit damage.

Wiring diagram for the rear interface of the LEHX SM6225 Smart AI Box, showing connections for power, speakers, and other functions.
Figure 4.1: Rear Interface Wiring Diagram

4.3 Reversing Camera Installation

To install a reversing camera:

  1. Locate the reverse control line (pink wire) on the unit's power line and connect it to a +12V positive source. This will trigger the screen to turn blue when reversing.
  2. Find the CAM video input interface at the back of the unit.
  3. Connect the camera's red power wire and the video cable's red wire to the positive pole of the reverse lamp. The video cable's yellow connector goes into the CAM video input. The black power wire of the camera is typically not used.

Note: If a reversing camera is not installed, leave the REVERSE/BACK cable unconnected. Connecting it without a camera may cause display issues or force the unit into reverse mode. If this occurs, disconnect the REVERSE/BACK line immediately.

Diagram illustrating the installation of a reversing camera, showing connections to reverse light and the main unit's video input.
Figure 4.2: Reversing Camera Wiring Diagram

4.4 CANBUS Connection

The CANBUS connection varies for high-end and low-end car models. Ensure correct connection to avoid issues.

  • For High-End Models: Disconnect the CANBUS box and then connect the CANBUS.
  • For Low-End Models: Connect the CANBUS box and then disconnect it.

Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

Diagram showing CANBUS connection methods for high-end and low-end car models, indicating when to connect or disconnect the CANBUS box.
Figure 4.3: CANBUS Connection Diagram

5. Operating Instructions

5.1 Wireless CarPlay / Android Auto

The LEHX SM6225 supports both wired and wireless CarPlay and Android Auto. This allows you to seamlessly integrate your smartphone with your car's display.

Screenshots of Wireless CarPlay and Android Auto interfaces displayed on a car's head unit and a smartphone.
Figure 5.1: Wireless CarPlay and Android Auto Interfaces

Apple CarPlay (Some models support)

  • Wired Connection: Connect your iPhone to the AI Box using a USB data cable. CarPlay will launch automatically.
  • Wireless Connection:
    1. Enable Bluetooth and Wi-Fi on your iPhone.
    2. Connect to the AI Box's Bluetooth.
    3. CarPlay will automatically launch. The signal is transmitted via Wi-Fi, so even if Bluetooth is off, it will function normally. CarPlay will disconnect if Wi-Fi is turned off.

Android Auto (Some models support)

This feature may not be supported in all countries, and Google Play services must be locally available.

  • Ensure you have the "Android Auto" app installed from Google Play.
  • Use an Android 6.0 or higher mobile phone with a valid data cable connection.
  • Wired Connection: Connect your Android phone to the AI Box using a USB data cable. Android Auto will launch automatically.
  • Wireless Connection:
    1. Enable Bluetooth and Wi-Fi on your Android phone.
    2. Connect to the AI Box's Bluetooth.
    3. Android Auto will automatically launch. The signal is transmitted via Wi-Fi, so even if Bluetooth is off, it will function normally. Android Auto will disconnect if Wi-Fi is turned off.
Image showing the LEHX SM6225 Smart AI Box enabling wireless CarPlay and Android Auto from wired OEM systems.
Figure 5.2: Wireless Conversion from Wired OEM CarPlay/Android Auto

5.2 Learning Steering Wheel Controls

To configure your steering wheel controls:

  1. Press and hold a button on your car's original steering wheel.
  2. On the unit's screen, find the corresponding button icon for the function you want to assign.
  3. Click the icon to change its color, indicating successful learning.

Refer to the wiring diagram (Figure 4.1) for KEY1 (Orange/Black) and KEY2 (Brown) connections.

5.3 Intelligent Voice Control

The device supports intelligent voice control for various functions, enhancing driving safety and convenience. You can use voice commands for tasks such as:

  • "Turn on music"
  • "Navigation to the airport"
  • "How is the weather today"
  • "Hey Siri" (for Apple CarPlay)
Illustration of intelligent voice control in a car, showing a driver interacting with the system using voice commands.
Figure 5.3: Intelligent Voice Control in Action

6. Troubleshooting

This section provides solutions to common issues you might encounter.

6.1 Cannot Boot Normally

  1. Wiring Check: Ensure the Yellow (B+), Red (ACC), and Black (GND) wires are correctly connected to +12V constant, +12V ignition, and ground respectively. Incorrect or insufficient connections will prevent the unit from booting.
  2. Original Car Wiring: Do not connect the unit's wiring directly to the original car's wiring by color alone, as car wiring standards vary. Incorrect connections can cause damage.
  3. Car Plug Compatibility: The original car plug cannot be directly plugged into the new unit.
  4. Fuse Check: If the 3 wires are correctly connected but the unit doesn't boot, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn on the key, and press the unit's power button.
  5. Repeated Fuse Blowing: If the fuse blows repeatedly, it indicates a short circuit in the unit's protection circuit. The unit may require professional repair. As a final check, connect the yellow and red wires to a 12V battery's positive terminal and the black wire to the negative terminal. If it boots, the car's wiring is faulty. If not, the unit is broken.

6.2 Automatic Shut-down

  1. Cable Error: If the blue cable (auto antenna power supply) is connected to the unit's power cable, it may cause automatic shutdown. Follow correct wiring methods.
  2. Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down automatically, the unit is faulty. If not, the power supply is the issue.

6.3 Noise Present

  1. Speaker Power: If the original speaker power is too low, noise may occur at high volumes. When replacing speakers or listening to music, avoid excessively high volumes.
  2. Grounded Speaker Cable: Ensure speaker cables are not grounded. Connect the speaker cable directly to the unit's speaker cable.

6.4 Remote Control Cannot Be Used

To test the remote control, point your phone camera at the remote's light and press a button. If the light doesn't illuminate, replace the battery. If it illuminates, the remote is functional.

6.5 Settings Not Saved (No Memory)

  1. Ensure the yellow (B+) and red (ACC) lines are connected correctly (yellow to positive, red to key control).
  2. If yellow and red are reversed, simply swap their positions.

6.6 Bluetooth Not Working

Turn on the unit, search for its Bluetooth name on your mobile phone, and click "Connect." Once connected, you should be able to make calls and play music via Bluetooth.

6.7 Product Emits Smoke

Replace the FUSE. If the problem persists, the internal circuit is likely burned, requiring after-sales service.

6.8 Sound Cannot Be Adjusted

  1. Reset the unit or unplug and replug the power cord.
  2. If the volume knob is broken, it may need replacement.

6.9 Reversing Camera Does Not Display

  1. Wiring: Check for incorrect or missing wiring. Refer to section 4.3 for camera connection method.
  2. If the camera is broken, it will need to be replaced.

6.10 USB Devices Cannot Be Played

Format the USB flash drive to FAT32. Re-download one or two songs and try again. If it still doesn't work, replace the USB flash drive.

6.11 FM Does Not Receive Radio Station

  1. Ensure the antenna plug is fully inserted. Check if the antenna is disconnected or the line is faulty.
  2. Search for stations by pressing the "AS" button for automatic search, or use the "before" or "after" buttons.
  3. If the above doesn't resolve the issue, unplug the antenna plug and insert a screwdriver or metal strip in its place to test.

6.12 No Sound Immediately After Installation

The unit is tested before shipment. If there is no sound, it's usually a wiring error or a short-circuited original car speaker wire. To check:

  1. Check if the speaker cable is short-circuited and connected. Reconnect if necessary.
  2. Verify the number of speaker cables. If only 2 speaker cables are present, the original car line may not match the unit. You may need to re-route the original car line. One speaker requires 2 speaker wires; two speakers require 4 speaker cables.

6.13 No Sound After A While

Disconnect all speaker cables from the unit (do not remove them). Find an external speaker and connect it to the gray and purple wires of the tail line. Connect any group to green and check for sound. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

7. User Tips

  • Always ensure all connections are secure and insulated to prevent short circuits.
  • For optimal performance, keep the device's software updated.
  • If experiencing connectivity issues, try restarting both the AI Box and your smartphone.

8. Warranty and Support

For detailed warranty information and technical support, please refer to the official LEHX website or contact customer service. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

For further assistance, you can contact LEHX customer service via their official channels, including WhatsApp, YouTube, TikTok, and Instagram.

LEHX Android Car Media Player Instructions cover page with certifications.
Figure 8.1: LEHX Product Certifications

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.