1. Introduction
Thank you for choosing the K&F Concept LP-E6/LP-E6N/LP-E6NH Dual Slot Quick Battery Charger. This manual provides essential information for the safe and efficient use of your new charger. Please read it thoroughly before operation and keep it for future reference. This charger is designed to provide a convenient and reliable power solution for your Canon LP-E6 series camera batteries.

2. Product Overview
The K&F Concept Dual Slot Quick Battery Charger is a compact and versatile charging solution for Canon LP-E6, LP-E6N, and LP-E6NH batteries. It features dual charging slots, allowing you to charge two batteries simultaneously. The charger is equipped with both Micro-USB and Type-C input ports for broad compatibility with various power sources.
Key Features:
- Dual Charging Slots: Charge two LP-E6 series batteries concurrently.
- Dual Input Ports: Micro-USB and Type-C interfaces for flexible power input.
- LED Indicators: Clearly display the charging status for each battery.
- Multiple Charging Options: Compatible with laptops, PCs, car chargers, wall chargers, and power banks.
- Advanced Safety Protections: Built-in smart chips protect against over-charging, short-circuit, high-temperature, over-current, over-voltage, and electronic shock.
- Ultra-Thin Design: Compact and portable, ideal for travel.


3. Specifications
| Feature | Detail |
|---|---|
| Model Number | LP-E6/LP-E6N/LP-E6NH |
| Type | Dual Slot USB Battery Charger |
| Material | Plastic |
| Input | 5V / 2.1A (Micro-USB, Type-C) |
| Output (1 Battery) | 8.4V / 700mA |
| Output (2 Batteries) | 8.4V / 500mA |
| Thickness | Approx. 24mm / 0.9 inches |
| Compatible Batteries | Canon LP-E6, LP-E6N, LP-E6NH |
| Compatible Cameras | Canon EOS R5, EOS R6, EOS R, EOS 5D Mark IV, 5D Mark III, 5DS, 5DS R, 5D Mark II, 6D, 6D Mark II, 7D, 7D Mark II, 90D, 80D, 70D, 60D, 60Da |
| Package Contents | 1x Dual Slot Charger, 1x Micro USB Cable (Note: Type-C cable not included) |

4. Setup
- Unpack the Charger: Carefully remove the charger and the included Micro USB cable from its packaging.
- Connect to Power Source:
- Insert the Micro USB cable into the Micro-USB input port on the charger.
- Alternatively, if you have a Type-C cable (not included), you can use the Type-C input port.
- Connect the other end of the cable to a compatible USB power source (e.g., a wall adapter, computer USB port, car charger, or power bank).
- Insert Batteries: Align your Canon LP-E6, LP-E6N, or LP-E6NH batteries with the charging slots (CH1 and CH2) and gently push them in until they are securely seated. Ensure the battery contacts align with the charger's pins.
5. Operating Instructions
Charging Process:
- Once batteries are inserted and the charger is connected to a power source, the LED indicators for each channel (CH1 and CH2) will illuminate.
- A red light indicates that the battery in that slot is currently charging.
- A green light indicates that the battery is fully charged or that no battery is present in the slot.
- The charging current is automatically adjusted: 700mA when charging one battery, and 500mA per battery when charging two simultaneously.

Multiple Charging Options:
The charger's dual input ports (Micro-USB and Type-C) allow for flexible charging from various sources:
- Standard USB wall adapters
- Computer USB ports (laptop or desktop PC)
- Car USB chargers
- Portable power banks

Safety Features:
The charger incorporates smart chips to ensure safe charging and protect your batteries from potential damage. These protections include:
- Overcharge protection
- Overcurrent protection
- Over-discharge protection
- Overvoltage protection
- Short-circuit protection
- Overpower protection
- Temperature protection
- Battery recovery protection

6. Maintenance
- Cleaning: Disconnect the charger from the power source and remove all batteries before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, remove batteries from the charger.
- Handling: Avoid dropping the charger or subjecting it to strong impacts. Do not attempt to disassemble or modify the charger, as this will void the warranty and could cause damage or injury.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Batteries not charging (LEDs off or green) |
|
|
| LED indicators not working |
|
|
| Slow charging |
|
|
8. User Tips
- For optimal charging speed, use a power adapter that can deliver at least 2.1A output.
- Always ensure batteries are inserted correctly to avoid damage to the battery or charger.
- The compact size makes this charger ideal for travel; consider carrying a power bank for on-the-go charging.
- While the charger has multiple safety features, it's good practice to monitor charging, especially during the first few uses.
9. Warranty and Support
K&F Concept products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the warranty card included with your purchase or visit the official K&F Concept website.