Jonsbo ZA-120/240/360

Contents

Jonsbo ZA-120/240/360 Series Case Fan Instruction Manual

Model: ZA-120/240/360 | Brand: Jonsbo

Jonsbo ZA-120/240/360 Case Fan product overview, showing various sizes and ARGB lighting.

Jonsbo ZA-120/240/360 Case Fan product overview, showing various sizes and ARGB lighting.

1. Setup Instructions

This section guides you through the installation of your Jonsbo ZA series case fan. Proper installation ensures optimal cooling performance and aesthetic appeal.

1.1 Component Overview

Before starting, ensure you have all necessary components: the fan unit(s), mounting screws, and any included cables.

1.2 Physical Installation

  1. Mounting the Fan: Position the fan(s) in your PC case or on your radiator. The 360-degree four-sided mirror design ensures a consistent aesthetic regardless of orientation. Secure the fan unit(s) using the provided screws. The design simplifies installation steps by fixing with 4 screws.
  2. Airflow Direction: Pay attention to the desired airflow. Fans can be installed for forward (air inlet surface) or reverse (air outlet surface) airflow. Refer to the diagram below for visual guidance.
Diagram illustrating positive light effect and airflow direction for both standard (inlet surface) and reverse (air outlet surface) nine-blade cooling fans.

Diagram illustrating positive light effect and airflow direction for both standard (inlet surface) and reverse (air outlet surface) nine-blade cooling fans.

1.3 Wiring and Connectivity

The ZA series fans feature simplified wiring for seamless connectivity and easier cable management.

  1. PWM Connection: Connect the 4-PIN PWM cable from the fan to an available 4-PIN fan header on your motherboard. This allows for dynamic fan speed control.
  2. ARGB Connection: Connect the 5V 3-PIN ARGB cable to a compatible 5V 3-PIN ARGB header on your motherboard or a dedicated ARGB controller. The 5V ARGB plug features male and female designs, allowing multiple fans or other light-efficiency devices to be connected in series (daisy-chained).
Diagram illustrating simplified wiring and seamless connectivity for the fan, showing a single line connection to the motherboard.

Diagram illustrating simplified wiring and seamless connectivity for the fan, showing a single line connection to the motherboard.

Detailed guide on using the ARGB illusionary light effect, including synchronization with motherboard and daisy-chaining multiple devices.

Detailed guide on using the ARGB illusionary light effect, including synchronization with motherboard and daisy-chaining multiple devices.

2. Operating Instructions

Once installed and connected, your Jonsbo ZA series fan is ready for operation.

2.1 Fan Speed Control (PWM)

The fan speed is controlled via the 4-PIN PWM connection to your motherboard. You can adjust fan curves and speeds through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. The fan operates within a speed range of 700-2400 RPM (±10%).

2.2 ARGB Lighting Effects

The ZA series fans feature a 360 multi-sided thousand-layer mirror design with colorful synchronous light effects. To control the ARGB lighting:

  • If connected to a motherboard ARGB header, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting patterns and colors. The lighting can be synchronized with over 16 million color effects.
  • If connected to a standalone ARGB controller, use the controller's buttons or software (if applicable) to cycle through various lighting modes.
Image highlighting the integrated fan grille lighting effect and the 360-degree four-sided mirror design, emphasizing screw-fixed installation.

Integrated fan grille lighting effect and the 360-degree four-sided mirror design.

3. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your Jonsbo ZA series fan.

  • Dust Cleaning: Periodically clean the fan blades and frame to prevent dust buildup, which can impede airflow and increase noise. Use compressed air or a soft brush to gently remove dust. Ensure the PC is powered off before cleaning.
  • Cable Management: Ensure all cables are neatly routed and secured to prevent interference with fan blades or other components.

4. Troubleshooting

If you encounter issues with your Jonsbo ZA series fan, refer to the following common troubleshooting steps:

  • Fan Not Spinning:
    • Check if the 4-PIN PWM cable is securely connected to the motherboard fan header.
    • Ensure the fan header on the motherboard is enabled in BIOS/UEFI settings.
    • Test the fan on a different fan header or with a fan controller to rule out a faulty header.
  • ARGB Lighting Not Working:
    • Verify that the 5V 3-PIN ARGB cable is correctly connected to a compatible ARGB header or controller. Note that this is a 5V ARGB connection, not a 12V RGB connection.
    • Ensure your motherboard's RGB software or external controller is properly configured and updated.
    • Check for any loose connections in a daisy-chained setup.
  • Excessive Noise:
    • Check for dust buildup on fan blades and clean if necessary.
    • Ensure the fan is securely mounted and not vibrating against the case.
    • Adjust fan speed settings in your motherboard's BIOS/UEFI or software to a lower RPM if noise is a concern.

5. Specifications

Detailed specifications for the Jonsbo ZA-120, ZA-240, and ZA-360 series fans.

Front aluminum CD pattern nameplate of the Jonsbo ZA series fan.

Front aluminum CD pattern nameplate.

Visual representation of multiple fan versions (ZA-360, ZA-240, ZA-120) in both forward and reverse configurations.

Multiple versions to choose from (ZA-360, ZA-240, ZA-120 in forward/reverse).

General Specifications

  • Brand: Jonsbo
  • Used For: Case, Radiator
  • Bearing Type: Fluid Bearing (Hydraulic Bearings)
  • Blade Quantity: 9
  • Fan Life (MTTF): ≥ 20000h (Room Temp: 25 ℃) / 50000 hrs
  • Power Interface: 4PIN (PWM), 5V-3pin ARGB
  • Lines: 4 LINES
  • Package: Yes
  • Origin: Mainland China

Model-Specific Specifications

Jonsbo ZA-120 Series Specifications
FeatureZA-120B (Forward)ZA-120BR (Reverse)
Fan Size120(L)*120(W)*28(H) mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume21.46-62.40 CFM19.46-44.58 CFM
Wind Pressure0.49-2.46 mmH2O0.29-1.71 mmH2O
Noise21.3-37.3 dB(A)17.3-31.6 dB(A)
Rated VoltageFAN: 12V, LED: 5V
Rated CurrentFAN: 0.22A, LED: 0.71AFAN: 0.13A, LED: 0.71A
PowerFAN: 2.64W, LED: 3.55WFAN: 1.56W, LED: 3.55W
InterfacePWM 4PIN, ARGB 3PIN

Jonsbo ZA-240 Series Specifications
FeatureZA-240B (Forward)ZA-240BR (Reverse)
Fan Size242(L)*123(W)*28(H) mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume21.46-62.40 CFM19.46-44.58 CFM
Wind Pressure0.49-2.46 mmH2O0.29-1.71 mmH2O
Noise21.3-37.3 dB(A)17.3-31.6 dB(A)
Rated VoltageFAN: 12V, LED: 5V
Rated CurrentFAN: 0.43A, LED: 1.16AFAN: 0.25A, LED: 1.16A
PowerFAN: 5.16W, LED: 5.80WFAN: 3.00W, LED: 5.80W
InterfacePWM 4PIN, ARGB 3PIN

Jonsbo ZA-360 Series Specifications
FeatureZA-360B (Forward)ZA-360BR (Reverse)
Fan Size362(L)*123(W)*28(H) mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume21.46-62.40 CFM19.46-44.58 CFM
Wind Pressure0.49-2.46 mmH2O0.29-1.71 mmH2O
Noise21.3-37.3 dB(A)17.3-31.6 dB(A)
Rated VoltageFAN: 12V, LED: 5V
Rated CurrentFAN: 0.61A, LED: 1.35AFAN: 0.35A, LED: 1.35A
PowerFAN: 7.32W, LED: 6.75WFAN: 4.20W, LED: 6.75W
InterfacePWM 4PIN, ARGB 3PIN
Performance chart for Quiet/Low Noise PWM ARGB Fans, detailing noise levels, RPM, and airflow for both forward and reverse fan blades.

Performance chart for Quiet/Low Noise PWM ARGB Fans.

Specifications table for the ZA-360 series (ZA-360B and ZA-360BR models).

Specifications table for the ZA-360 series.

Specifications table for the ZA-120 and ZA-240 series (B and BR models).

Specifications table for the ZA-120 and ZA-240 series.

6. User Tips

Here are some tips to enhance your experience with the Jonsbo ZA series fans:

  • Optimize Airflow: Plan your fan placement carefully to create an efficient airflow path within your PC case. Typically, front and bottom fans act as intake, while rear and top fans act as exhaust.
  • ARGB Software Exploration: Take time to explore the full capabilities of your motherboard's ARGB software. Many offer advanced effects, music synchronization, and integration with other RGB components.
  • Cable Management: Utilize the simplified wiring and male/female ARGB connectors to maintain a clean build. Good cable management not only looks better but also improves airflow.
  • Quiet Operation: If noise is a priority, experiment with lower fan speeds in your BIOS/UEFI settings. The ZA series fans are designed for low noise, especially the reverse blade models at lower RPMs.

7. Warranty & Support

Jonsbo products are designed for quality and performance. For any technical assistance, warranty claims, or support inquiries, please contact your retailer or the official Jonsbo support channels.

Please retain your proof of purchase for warranty purposes.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.