1. Introduction
This manual provides essential information for the safe and efficient operation of your MYAMi MPPT Solar Charge Controller. This controller is designed for solar off-grid power generation systems to automatically regulate battery charging and discharging. It utilizes advanced tracking algorithms to maximize power extraction from solar panels, ensuring optimal battery charging and extended battery life. Its comprehensive self-test and electronic protection functions prevent damage from installation errors and system failures.
Please read this manual carefully to fully utilize all functions and enhance your photovoltaic system's performance.
2. Key Features and Advantages
- High Efficiency: MPPT intelligent control charging with a peak efficiency of 99% and charging efficiency up to 98%.
- Intelligent Temperature Control: Features an intelligent temperature-controlled fan that activates above 45 ℃ and turns off below 40 ℃.
- Multiple Protection: Includes overcharge prevention, reverse connection protection, high temperature protection, over power protection (OCP/OLP/SCP/OTP), and polarity protection.
- Battery Compatibility: Suitable for a wide range of batteries including lead-acid, Gel, Lithium iron phosphate, and Ternary batteries. Comes with a lithium battery activation function.
- User-Friendly Display: Equipped with a full-color LCD display for clear and intuitive presentation of operating data and charging status. Power and electricity generation data are automatically displayed alternately.


3. Specifications
The MYAMi MPPT Solar Charge Controller is available in several models with varying power capacities. Below are the specifications for common models:
| Attribute | MY-MPPT700F | MY-MPPT1400F | MY-MPPT2800F | MY-MPPT5600F |
|---|---|---|---|---|
| Input Voltage | 18-150V | |||
| Controller Type | MPPT | |||
| Charging Current | 12.5A | 25A | 50A | 100A |
| Controller Power (12V) | 175W | 350W | 700W | 1400W |
| Controller Power (24V) | 350W | 700W | 1400W | 2800W |
| Controller Power (48V) | 700W | 1400W | 2800W | 5600W |
| Size (cm) | 14*6*9.5 | 17*6*9.5 | 21*9*16.5 | 26.5*10*19.5 |
| Weight (kg) | 0.58 | 0.75 | 1.65 | 2.9 |
| MPPT Efficiency | 97% (Tracking efficiency up to 95-99%) | |||
| Display | LCD Display | |||
| Protection | OCP/OLP/SCP/OTP (Over Current, Over Load, Short Circuit, Over Temperature Protection) | |||


4. Installation and Setup
Proper installation is crucial for the safe and efficient operation of your solar charge controller. Please follow these guidelines carefully:
4.1 Safety Precautions
- It is strictly prohibited to input high voltage into the solar controller. The open circuit voltage (Voc) of the solar panel cannot exceed 150 volts.
- Do not charge low voltage batteries with high voltage settings. The battery type and voltage settings on the controller must be consistent with the battery being charged. The factory default is a 24V lead-acid battery in a locked state.
- It is strictly prohibited to reverse the positive and negative poles of DC equipment. Always pay close attention to polarity.
- Do not replace fuses with larger specifications or with copper wires. When replacement is needed, use fuses with the exact same specifications and parameters.
- Ensure the installation location is stable, provides adequate insulation for wiring, and includes waterproof measures. Keep the controller out of reach of children.
4.2 Wiring Instructions
- Connect Solar Panel: First, connect the solar panel to the controller, ensuring the correct output voltage level. The wires connecting the controller to the solar panel should be as short and thick as possible to reduce line losses and improve power generation efficiency.
- Connect Battery: After connecting the solar panel, connect the battery to the controller. Carefully confirm the positive and negative polarities repeatedly before making the connection. Incorrect polarity will burn out the controller fuse.
- Load Connection (if applicable): If your system includes a DC load directly connected to the controller, connect it after the battery.

Note: The internal power supply of this series of controllers is provided by photovoltaic or battery simultaneously. On cloudy days or at night, when the solar energy is not powered, the solar controller does not work and does not consume battery power.
5. Operating Instructions
Once properly installed, your MYAMi MPPT Solar Charge Controller will begin operating automatically. The LCD display provides real-time information about your system.
5.1 Display and Controls
- LCD Display Screen: Shows operating data such as battery voltage, charging current, power generation, and charging status.
- Battery Voltage Adjustment Button: Used to adjust the target battery voltage for charging.
- Battery Type Switching Button: Allows selection of different battery types (e.g., lead-acid, gel, lithium) to optimize charging parameters.
5.2 Charging Process
The MPPT controller continuously tracks the maximum power point of your solar panels to ensure the battery is charged with the highest possible efficiency. The charging process is optimized to extend battery life.
5.3 Intelligent Fan Operation
The intelligent temperature-controlled fan will automatically turn on when the controller's internal temperature exceeds 45 ℃ to prevent overheating and will turn off when the temperature drops below 40 ℃.
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your MYAMi MPPT Solar Charge Controller.
- Solar Panel Cleaning: Ensure solar panels are clean and free from obstructions (e.g., dirt, leaves, snow) to maximize energy harvest.
- Fuse Inspection: Periodically check the controller's fuses. If a fuse is blown, replace it only with a fuse of the exact same specifications. Never use a fuse with a higher rating or substitute with copper wire.
- Wiring Connections: Regularly inspect all wiring connections for tightness and corrosion. Loose or corroded connections can lead to power loss or system malfunction.
- Ventilation: Ensure the controller's ventilation openings are clear and not obstructed to allow for proper heat dissipation by the intelligent fan.
7. Troubleshooting
This section addresses common issues you might encounter with your solar charge controller.
- Controller Not Working: If the controller display is off or it's not charging, first check if the solar panels are receiving sufficient sunlight. The controller will not operate and consume battery power on cloudy days or at night when solar energy is unavailable. Verify all wiring connections, especially battery and solar panel polarities.
- Blown Fuse: A blown fuse often indicates a reverse polarity connection during installation or a short circuit. Carefully re-check all connections for correct polarity and replace the fuse with one of the identical specifications.
- Low Charging Efficiency: Ensure solar panels are clean and unobstructed. Check that the solar panel's open circuit voltage does not exceed the controller's maximum input voltage (150V). Verify that the battery type and voltage settings on the controller match your battery.
- Overheating: If the controller feels excessively hot, ensure it is installed in a well-ventilated area and that the intelligent fan is operating correctly when temperatures rise above 45 ℃. Clear any obstructions around the fan or vents.
8. User Tips
- For optimal performance, mount your solar panels in a location that receives maximum direct sunlight throughout the day, free from shadows.
- When selecting battery type, ensure it matches the controller's capabilities and your system's needs. Lithium batteries often require specific charging profiles, which this controller supports with its activation function.
- Consider using appropriate wire gauges for your solar panels and battery connections. Shorter, thicker wires minimize voltage drop and improve overall system efficiency.
- Regularly monitor the LCD display for system status and performance metrics to ensure everything is operating as expected.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the MYAMi Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase.