1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your E-ACE DashCam Hardwire Kit. This kit is designed to provide a constant power supply to your dash camera, enabling features like 24-hour parking monitoring and time-lapse video recording without occupying the cigarette lighter interface.
2. Product Overview
2.1 Key Features
- Enables 24-hour parking monitoring for continuous surveillance.
- Supports time-lapse video recording for extended coverage.
- Reduces and stabilizes 12V/24V vehicle voltage to a safe 5V for your dash camera.
- Includes low voltage protection to prevent car battery drain.
- Easy installation with fuse and ground connections.
- Type-C output for wide compatibility with E-ACE dashcams and other compatible devices.
2.2 Package Contents
- E-ACE DashCam Hardwire Kit (Type-C)
- Fuse (integrated)
- User Manual (this document)

3. Specifications
| Feature | Detail |
|---|---|
| Model Name | Z21 |
| Brand Name | E-ACE |
| Item Type | Cables, Adapters & Sockets |
| Material | ABS |
| Input Voltage | 12V-24V |
| Output Voltage | 5V |
| Output Current | 2.5A |
| Low Voltage Protection | 11.6V (for 12V battery) / 23.6V (for 24V battery) |
| Standby Power Consumption | ≤15W |
| Interface | USB 2.0 (Type-C connector) |
| Item Size | 3.5 meters (cable length) |
| Special Features | Parking monitor, Time-lapse video, Low voltage protection |
4. Setup and Installation
Important Safety Notice: Before connecting the hardwire kit, ensure the engine is off and disconnect the negative terminal of the car battery to prevent short circuits.
4.1 Wiring Diagram

The hardwire kit consists of three main wires:
- Black Wire (GND): Connects to the car's ground (negative pole).
- Red Wire (ACC): Connects to an ACC (Accessory) fuse in the car's fuse box. This provides power when the vehicle is on/off, allowing the dash cam to power on/off with the vehicle.
- Yellow Wire (BAT+): Connects to a constant fuse (BAT interface) in the car's fuse box. This provides continuous power for 24-hour parking monitoring.
Note:
- If you want to continue monitoring after parking (the DVR works 24 hours), connect the yellow wire (BAT+) to a constant fuse.
- If you want to stop monitoring after parking (the DVR does not work after parking), connect the red wire (ACC) to the fuse box ACC interface.
- The negative pole (black wire) should be connected to a metal part of the car chassis, such as a screw near the fuse box.
4.2 Step-by-Step Installation
- Connect Dash Cam: Connect the Type-C end of the hardwire kit to your dash cam.
- Route Cable: Carefully route the power cord along the windshield and down the A-pillar to the fuse box area. Use a trim removal tool to tuck the cable neatly under the car's interior panels.
- Connect Ground Wire (Black): Locate a metal screw or bolt on the car's chassis near the fuse box. Loosen the screw, attach the U-shaped terminal of the black GND wire, and tighten the screw securely.
- Connect ACC Wire (Red): Identify an ACC fuse in your car's fuse box. This fuse should only have power when the ignition is on. Pull out the chosen fuse, connect the red wire to the 10A fuse, and reinsert it into its original position.
- Connect BAT+ Wire (Yellow): Identify a constant power fuse (BAT interface) in your car's fuse box. This fuse should have power even when the ignition is off. Pull out the chosen fuse, connect the yellow wire to the fuse, and reinsert it into its original position.
- Test Connection: Reconnect the car battery's negative terminal. Start your car and check if the dash cam powers on. Turn off the car and check if the parking monitoring mode activates (if connected to BAT+).
- Secure Wiring: Ensure all wires are securely tucked away and do not interfere with vehicle operation.


If you do not have experience installing car electronics, it is recommended to seek professional assistance.
5. Operating Instructions
Once correctly installed, the hardwire kit will manage power delivery to your dash cam based on your wiring configuration.
5.1 24-Hour Parking Monitoring
If the yellow BAT+ wire is connected to a constant power source, your dash cam will receive continuous power, enabling 24-hour parking monitoring. The dash cam's internal G-sensor will detect impacts or vibrations while parked and automatically record footage.

5.2 Time-Lapse Video Function
For dash cams that support time-lapse video, connecting the hardwire kit allows for continuous recording over extended periods, saving storage space and making it easier to review long parking sessions. This function requires the hardwire kit to be connected for constant power.

5.3 Low Voltage Protection
The hardwire kit features built-in low voltage protection. If your car battery voltage drops below 11.6V (for 12V systems) or 23.6V (for 24V systems), the kit will automatically cut off power to the dash cam to prevent draining your car battery, ensuring your vehicle can start.

6. Maintenance
- Regularly check all connections to ensure they are secure and free from corrosion.
- Keep the hardwire kit and dash cam free from dust and moisture.
- Do not attempt to open or modify the hardwire kit, as this will void the warranty and could cause damage.
- If the fuse blows, replace it with a fuse of the same amperage (10A).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dash cam does not power on. | Loose connection, blown fuse, incorrect wiring. | Check all wire connections (GND, ACC, BAT+). Verify the fuse in the hardwire kit and the car's fuse box. Ensure the dash cam is compatible with Type-C power. |
| Parking monitoring not working. | Yellow BAT+ wire not connected to constant power, dash cam settings. | Ensure the yellow BAT+ wire is connected to a fuse that provides constant power. Check your dash cam's settings for parking mode activation. |
| Car battery drains. | Low voltage protection not functioning, prolonged parking monitoring in extreme conditions. | Verify the low voltage protection threshold is set correctly (if adjustable on dash cam). If battery drain persists, consider reducing parking monitoring duration or checking car battery health. |
| Poor FM audio transmission when powering a screen. | Power cable used as antenna, hardwire kit buried in dashboard. | This is a known issue with some screens that use the power cable as an antenna. The hardwire kit's location can cause signal distortion. Consider alternative audio output methods if available on your screen. |
8. User Tips
- Fuse Tap: For easier and safer installation, consider using a fuse tap (add-a-circuit) for connecting the ACC and BAT+ wires to the fuse box. This avoids wrapping wires around fuse legs.
- Cable Length: The 3.5-meter cable length is generally sufficient for routing and hiding the wires within most vehicles.
- Ground Wire Extension: The ground wire (black) might be short for some attachment points. Be prepared to extend it with additional wire if necessary to reach a suitable chassis ground.
- Compatibility: While designed for E-ACE recorders, this kit may work with other dash cams requiring 5V/2.5A Type-C power. Always verify compatibility with your specific dash cam model.
9. Frequently Asked Questions (FAQ)
- Q: Is this hardwire kit compatible with the Viofo A129 Plus Duo?
- A: One user reported it works great with the Viofo 119 Mini 2 and detects parking mode. For the A129 Plus Duo, ensure it uses a Type-C connector and requires 5V/2.5A power. It's always best to check your dash cam's specifications.
- Q: Does this cable work with 70mai dashcams?
- A: Compatibility with 70mai models is not explicitly stated, but it's confirmed to work well with 70mai M310 Plus for ignition-controlled power. Verify your specific 70mai model's power requirements and connector type (Type-C, 5V/2.5A).
- Q: Does it disconnect when the battery level drops?
- A: Yes, the kit includes low voltage protection. It automatically cuts off power to the dash cam if the car battery voltage drops below 11.6V (for 12V systems) or 23.6V (for 24V systems) to prevent battery drain.
- Q: Can I use this with a portable CarPlay screen?
- A: A user successfully used it to power a portable CarPlay screen. However, if your screen transmits audio via FM and uses the power cable as an antenna, burying the hardwire kit in the dashboard might cause signal distortion. Consider alternative audio output methods.
10. Warranty and Support
For warranty information or technical support, please refer to the seller's official channels or contact E-ACE customer service directly. Keep your purchase receipt as proof of purchase.
