Salange Universal Projector Stand

Contents

Salange Universal Projector Stand Instruction Manual

Model: Universal Projector Stand

1. Introduction

Thank you for choosing the Salange Universal Projector Stand. This versatile stand is designed to securely hold your projector, offering flexible viewing angles and multiple mounting options including desktop, wall, and ceiling. Its robust construction and universal 1/4-inch screw ensure compatibility with most projectors and cameras.

2. Package Contents

  • Salange Universal Projector Stand (1 unit)

3. Product Overview

Familiarize yourself with the components and features of your projector stand.

Salange Universal Projector Stand with a projector mounted

Figure 3.1: Salange Universal Projector Stand with a projector mounted.

Diagram showing multi-directional adjustability with 180 degree rotatable joints

Figure 3.2: Multi-directional adjustability of the stand, featuring 180° rotatable joints for optimal positioning.

Collage showing projector stand used in ceiling, wall-mounted, and desktop configurations

Figure 3.3: Various mounting options: Desktop, Wall-mounted, and Ceiling.

4. Setup Instructions

The stand offers versatile mounting options. Always ensure the stand is securely fastened and stable before placing your projector.

4.1 Desktop Setup

  1. Place the stand on a flat, stable surface. The bottom features a silicone pad for anti-slip protection.
  2. Locate the 1/4-inch screw on the top plate of the stand.
  3. Align the screw hole on the bottom of your projector with the stand's screw.
  4. Carefully screw the projector onto the stand until it is firmly attached. Do not overtighten.

4.2 Wall or Ceiling Mounting

The base of the stand has pre-drilled holes for wall or ceiling installation. Mounting hardware (screws, anchors) is not included and must be appropriate for your wall/ceiling material and the weight of your projector.

  1. Determine the desired mounting location.
  2. Mark the drilling points on the wall or ceiling using the stand's base as a template.
  3. Drill pilot holes as required by your mounting hardware.
  4. Securely attach the stand's base to the wall or ceiling using appropriate screws and anchors. Ensure it is firmly fixed and can support the weight.
  5. Attach your projector to the stand's 1/4-inch screw as described in step 4.1.

Video 4.1: Demonstration of attaching various projectors to the stand and adjusting its position.

5. Operating Instructions

The Salange Universal Projector Stand features multi-directional adjustability to achieve your desired projection angle.

  1. Once your projector is securely mounted, gently hold the projector and the stand's arm.
  2. The stand has two 180° rotatable joints (see Figure 3.2). Carefully pivot these joints to tilt or rotate your projector to the optimal viewing position.
  3. Ensure the joints are stable in the desired position before releasing the projector.

6. Maintenance

  • Keep the stand clean by wiping it with a soft, dry cloth.
  • Avoid using abrasive cleaners or solvents, as they may damage the finish.
  • Periodically check all screws and connections to ensure they remain tight and secure.

7. Troubleshooting

7.1 Projector feels unstable

  • Ensure the 1/4-inch screw connecting the projector to the stand is fully tightened.
  • If wall or ceiling mounted, verify that the base is securely fastened to the mounting surface.
  • Check that the stand's adjustable joints are firm in their position.

7.2 Stand slips on desktop

  • Ensure the desktop surface is clean and dry.
  • The stand's base has a silicone anti-slip pad; ensure it is intact and free from debris.

8. Specifications

FeatureSpecification
Form-factorDesk stand (adaptable for wall/ceiling)
Fastening TypeBracket
Max Weight Capacity (Desktop)5 kg (11 lbs)
Max Weight Capacity (Ceiling Mount)10 kg (22 lbs)
Screw Interface1/4 inch (6mm) universal
Adjustability0-180° Multi-angle rotation
Base Dimensions (L x W)15 cm x 12 cm
Height7.5 cm
Top Plate Dimensions (L x W)8 cm x 5.5 cm
Product parameter diagram with dimensions and weight capacity

Figure 8.1: Detailed product dimensions and weight capacities.

9. User Tips

  • Many users find this stand to be very stable and well-built, reflecting its quality upon handling.
  • It is highly compatible and works perfectly for a wide range of projectors.
  • Ensure all connections are tight for optimal stability, especially when adjusting angles.

10. Warranty and Support

For any warranty claims, technical support, or inquiries regarding your Salange Universal Projector Stand, please contact your original seller or the Salange customer service department. Please retain your proof of purchase for warranty purposes.

© 2023 Salange. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.