Introduction
Thank you for choosing the Homcom Pack of 4 Linen Upholstered Dining Chairs. This manual provides essential information for the safe assembly, proper use, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference.

Setup and Assembly
Your Homcom dining chairs require assembly. Please ensure all components are present before beginning. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching.
Package Contents (per chair)
- 1 x Chair Seat with Backrest
- 4 x Metal Legs
- Hardware Pack (screws, washers, Allen key)
Assembly Steps
- Carefully unpack all components and lay them out. Verify that all parts listed above are included.
- Attach each metal leg to the designated corner of the chair seat frame using the provided screws and washers. Ensure the legs are oriented correctly.
- Hand-tighten all screws initially.
- Once all legs are in place, gently place the chair upright on a level surface.
- Apply even pressure to the seat to ensure all legs are firmly on the ground.
- Fully tighten all screws with the Allen key. Do not overtighten.
- Repeat for the remaining chairs.

Usage Guidelines
These dining chairs are designed for indoor use in dining rooms, kitchens, or similar settings. They provide comfortable seating for meals and social gatherings.
- Always sit centrally on the chair to distribute weight evenly.
- Avoid standing on the chairs or using them as step stools.
- Do not exceed the maximum weight capacity of 120 kg.
- Ensure all legs are firmly on the ground before sitting to prevent tipping.

Care and Maintenance
Proper care will extend the life and appearance of your dining chairs.
Upholstery Care
- The linen-feel upholstery is designed to be easy to maintain.
- For general cleaning, gently vacuum the fabric to remove dust and loose debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
- For tougher stains, use a mild fabric cleaner specifically designed for synthetic fabrics. Test on an inconspicuous area first.
- Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the fabric.
Frame and Legs Care
- Wipe metal legs with a soft, damp cloth. Dry immediately to prevent rust.
- Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
- Avoid exposing the chairs to direct sunlight or extreme temperatures, which can cause fading or material degradation.

Troubleshooting
Chair feels wobbly:
- Ensure all assembly screws are fully tightened.
- Check that the chair is on a level surface. If not, consider using felt pads under the legs to compensate for unevenness.
Noise when sitting:
- Tighten all screws. Loose connections can cause creaking.
- Ensure no parts are rubbing against each other.
Specifications
| Feature | Detail |
|---|---|
| Model | 835-483 |
| Quantity | Pack of 4 chairs |
| Available Colors | Black, Dark Gray, White |
| Material | Foam, Metal, Synthetic Linen (100% Polyester) |
| Overall Dimensions (LxWxH) | 41 cm x 50 cm x 97 cm |
| Seat Dimensions (LxW) | 41 cm x 42 cm |
| Seat Height (from floor) | 47 cm |
| Backrest Dimensions (LxW) | 52 cm x 36 cm |
| Backrest Thickness | 4 cm |
| Maximum Load Capacity | 120 kg (per chair) |
| Installation Method | Assembly Required |
| Package Dimensions (LxWxH) | 80 cm x 42 cm x 27 cm |
| Package Weight | 17.6 kg |

User Tips
- For optimal stability, ensure the chairs are placed on a flat, even surface.
- Regularly check and tighten the leg screws to maintain structural integrity and prevent wobbling.
- When moving chairs, lift them rather than dragging to protect both the chair legs and your flooring.
- Consider adding felt pads to the bottom of the chair legs to prevent scratches on hard floors and reduce noise.
Warranty and Support
For any questions, concerns, or issues regarding your Homcom dining chairs, please contact the seller or retailer from whom you purchased the product. They will be able to provide assistance with product support, replacement parts, or warranty claims according to their policies.