OTOFIX D1 Diagnostic Tool User Manual

1. Safety Information

For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device.

There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work. Because of the vast number of test applications and variations in the products that can be tested with this equipment, we cannot possibly anticipate or provide advice or safety messages to cover every circumstance. It is the automotive technician's responsibility to be knowledgeable of the system being tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested.

Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual. Read, understand, and follow all safety messages and instructions in this manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment damage. All safety messages are introduced by a signal word indicating the hazard level.

⚠️ DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury to the operator or to bystanders.

⚠️ WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders.

Safety Instructions

• Always perform automotive testing in a safe environment.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area.
• Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged.
• Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
• Be extra cautious when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
• Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
• Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
• Keep the test equipment dry, clean, and free from oil, water and grease. Use a mild detergent on a clean cloth to clean the outside of the equipment as necessary.
• Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an accident.
• Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment.
• To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure.
• Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can damage the equipment.
• When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system. Engines produce carbon monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to serious personal injury or loss of life.
• It is not advised to use headphones at a high volume. Listening at high volumes for long periods of time may result in loss of hearing.

2. Getting Started

The OTOFIX D1 diagnostic system consists of two main components: the OTOFIX D1/D1 Lite Tablet (central processor and monitor) and the V1 Vehicle Communication Interface (VCI).

2.1 OTOFIX D1/D1 Lite Tablet

The tablet serves as the central processing and monitoring unit for the diagnostic system.

Functional Description

The tablet features a 7-inch LCD Capacitive Touchscreen, a built-in microphone, and an 8MP rear camera. It is powered by an Android 9.0 operating system with a 4x ARM Cortex-A35 (1.5GHz) processor, 2GB RAM, and 64GB ROM.

Figure 2-1: OTOFIX D1 Tablet Front View showing the display and main interface.

Figure 2-2: OTOFIX D1 Tablet Dimensions (8.27 x 5.71 x 0.59 inches).

Power Sources

The tablet can be powered from its internal rechargeable 5800 mAh 3.85V lithium-polymer battery (providing up to 8 hours of continuous operation), an AC/DC power adapter, or the vehicle utility power port via a direct cable connection.

⚠️ IMPORTANT:

Do not charge the battery when the temperature is lower than 0°C (32°F) or higher than 45°C (113°F).

2.2 V1 Vehicle Communication Interface (VCI)

The OTOFIX V1 is a small VCI used to connect to a vehicle's Data Link Connector (DLC) and communicate with the tablet via Bluetooth or USB cable for vehicle data transmission.

Figure 2-3: OTOFIX V1 VCI Device.

Power Sources

The VCI device can receive power from the vehicle's 12/24 Volt power supply via the OBDII/EOBD compliant DLC, or from a wall socket using the AC/DC power adapter.

2.3 Powering On/Off and Rebooting

Power Up

Long press the Lock/Power button on the top right side of the tablet to power on the unit. The system boots up and displays the OTOFIX Job Menu or slide to the right to unlock.

Power Down

All vehicle communications should be terminated before shutting down the tablet. A warning message displays if a shutdown is attempted while the tablet is communicating with the vehicle. Forcing a shut down while the tablet is communicating with the vehicle may lead to ECU errors on some vehicles. Please exit the Diagnostics application before shutting off the tablet.

1. Long press (press and hold) the Lock/Power Button.
2. Tap Power Off.
3. Tap OK. The tablet will turn off in a few seconds.

Reboot System

In case of a system crash, long press the Lock/Power button and tap Restart to reboot the system.

2.4 Product Registration

To access the Support platform and obtain updates and other services from Autel, you are required to register the OTOFIX Diagnostic Device the first time you use it.

1. Visit the website: http://pro.otofixtech.com
2. If you have an Autel account, sign in with your account ID and password.
3. If you are a new member to Autel, click on the Create Autel ID button on the left side to create an ID.
4. Enter the required information in the input fields, and click the Get Verification Code button to get the verification code for email validation.
5. The online system will automatically send a verification code to the registered email address. Input the code in the Verification Code field and fill in the other input fields, read through Autel's Terms and Conditions and click on Agree, and then click Create Autel ID at the bottom. A product registration screen will display.
6. The device's serial number and password is located in the About section of the Settings application on the tablet.
7. Select your product model, enter the product serial number and password on the Product Registration screen, and tap Submit to complete the registration procedure.

3. Operating Instructions

This section details the various diagnostic and service functions of the OTOFIX D1.

3.1 Establishing Vehicle Communication

To establish proper vehicle communication with the tablet, perform the following steps:

1. Connect the OTOFIX V1 to the vehicle's DLC for both communication and power source.
2. Connect the OTOFIX V1 to the tablet via BT pairing.
3. A green icon will display atop the VCI navigation button at the bottom bar on the screen. If communication has been established, the OTOFIX tablet is ready to start vehicle diagnosis.

NOTE:

The vehicle's DLC is not always located under the dashboard; refer to the user manual of the test vehicle for additional connection information.

VCI BT Pairing

Bluetooth (BT) Pairing provides a simple wireless connection. The VCI device needs to be either connected to a vehicle or to an available power source, so that it is powered up during the synchronization procedure. Make sure the tablet has a fully charged battery or is connected to an AC/DC power supply.

1. Power on the tablet.
2. Insert the 16-pin vehicle data connector of the OTOFIX V1 to the vehicle data link connector (DLC).
3. Tap VCI Manager on the OTOFIX Job Menu of the tablet.
4. Select VCI BT from the connection mode list.
5. Swipe the Bluetooth toggle button to ON. Tap Scan at the top-right corner. The device will start to search for available pairing units.
6. Depending on the type of VCI you use, the device name may display as "Maxi" suffixed with a serial number. Select the appropriate device for pairing.
7. When paired successfully, the connection status reads "Connected".
8. Wait a few seconds, and the VCI button on the system Navigation bar at the bottom of the screen will display a green BT mark, indicating the tablet is connected to the VCI device.
9. To disconnect the device, tap the connected device listing again.
10. Tap Back on the top left to return to the OTOFIX Job Menu.

NOTE:

A VCI device can be paired to only one tablet at a time, and once it's been paired, the device will not be discoverable for any other unit.

USB Cable Connection

The USB cable connection is a simple and stable way to establish communication between the tablet and the VCI device. After properly connecting the USB cable from the tablet to the V1 device, the VCI navigation button at the bottom bar of the screen displays a green mark and the vehicle/connection LED on the V1 device lights solid green, indicating the connection between the devices is successful.

NOTE:

The supplied USB cable is used for charging, not for vehicle communication. Please purchase a USB-C to USB-C cable separately if needed.

3.2 Vehicle Identification

The OTOFIX diagnostic system supports five methods of Vehicle Identification:

1. Auto VIN Scan
2. Manual Input
3. Scan VIN/License
4. Manual Vehicle Selection
5. OBDII Direct Entry

Auto VIN Scan

The OTOFIX diagnostic system features the latest VIN-based Auto VIN Scan function to identify CAN vehicles with just one tap, enabling the technician to quickly identify the exact vehicle and scan its available systems for fault codes.

1. Tap the Diagnostics application button from the OTOFIX Job Menu. The Vehicle Menu displays.
2. Tap the VID Scan button on the top toolbar.
3. Select Auto Detect. The tablet starts VIN scanning on the vehicle's ECU. Once the test vehicle is successfully identified, the system will guide you to the Vehicle Diagnostics screen.

Manual Input

For vehicles that do not support the Auto VIN Scan function, the OTOFIX diagnostic system allows you to enter the vehicle VIN or license numbers manually, or simply take a photo of the VIN sticker for quick vehicle identification.

1. Tap the Diagnostics application button from the OTOFIX Job Menu. The Vehicle Menu displays.
2. Tap the VID Scan button on the top toolbar.
3. Select Manual input.
4. Tap the input box and enter the correct VIN code or license numbers.
5. Tap OK. The vehicle will be identified and matched to the vehicle database and the Vehicle Diagnostics screen will display.
6. Tap the cross icon on the top-right corner to exit Manual Input.

Scan VIN/License

Tap Scan VIN in the dropdown list, the camera will be opened. On the right side of the screen, from top to bottom, three options are available: Scan Bar Code, Scan VIN, and Scan License.

NOTE:

The license plate recognition method is supported in some countries and areas. Please manual input the license numbers if it is not available.

Select one of three options and position the tablet to align the VIN or license numbers within the scanning window, the result displays in the Recognition Result dialog box after scanned. Tap OK to confirm the result, and then the vehicle information confirmation screen will display on the tablet. If all the vehicle information is correct, tap the icon in the middle of the screen to confirm the VIN of the vehicle being tested, tap OK to continue.

3.3 Diagnostics Functions

The Diagnostics application can access the electronic control module of multiple vehicle control systems, including but not limited to the engine, transmission, antilock brake system (ABS) and airbag system (SRS).

Auto Scan

The Auto Scan function performs a comprehensive scanning of all the systems in the vehicle ECU to locate faults and retrieve DTCs.

1. Tap the Diagnostics application button on the OTOFIX Job Menu. Choose the corresponding vehicle information and enter the vehicle diagnostic page.
2. Select Auto Scan on the Main menu to enter the diagnostic interface.
3. The vehicle system modules will be automatically scanned.

Figure 3-4: All-System Diagnostics showing coverage for SRS, Suspension, Immobilizer, AT, Cruise Control System, Steering Angle System, Air Conditioning System, Audio System, Body System.

Read Codes

This function retrieves and displays the DTCs from the vehicle control system. The Read Codes screen varies for each vehicle being tested. For some vehicles, freeze frame data can also be retrieved for viewing.

Erase Codes

After reading the retrieved codes from the vehicle and certain repairs have been made, you can erase the codes from the vehicle using this function. Before performing this function, make sure the vehicle's ignition key is in the ON (RUN) position with the engine off.

1. Tap Erase Codes in the Function Menu.
2. A warning message displays to inform you of data loss when this function is applied.
3. Tap Yes to continue. A confirming screen displays when the operation is successfully done.
4. Tap No to exit.
5. Tap ESC on the confirming screen to exit Erase Codes.
6. Check the Read Codes function again to ensure the operation is successful.

Live Data

When this function is selected, the screen displays the data list for the selected module. The parameters display in the order that they are transmitted by the ECU, so expect variation among vehicles. Gesture scrolling allows you to quickly move through the data list.

There are four types of display modes available for data viewing: Analog Gauge Mode, Text Mode, Waveform Graph Mode. Status parameters (ON, OFF, TRUE, FALSE) can only be displayed in Text Mode. Value parameters (sensor readings) can be displayed in both text and graph mode.

Active Test (Bi-directional Control)

The Active Test function is used to access vehicle-specific subsystem and component tests. During an active test, the tablet sends commands to the ECU to activate the actuators. This test determines the integrity of the system or part by reading ECU data, or by monitoring the operation of the actuators. Such tests may include switching a solenoid, relay, or switch, between two operating states.

Figure 3-5: Bi-directional Control / Active Tests showing control over components like windscreen wiper, horn, fuel pumps, adaptive headlamp, a/c fan, windows, inside mirrors, steering wheel heating.

Figure 3-6: Bi-directional Control Active Test example showing Pump and Valve Tests, Injector Buzz Test, EGR Test, EVAP Test, Idle Speed Adjustment, Solenoid Valve, Tank Ventilation.

Special Functions (40+ Hot Services)

These functions perform various component adaptations, including the recalibration or configuration of certain components after repairs or replacements have been completed. The OTOFIX D1 offers over 40 hot special functions, simplifying workflow in daily car maintenance.

Figure 3-7: 40+ Hot Services including Oil Reset, DPF, SAS, ABS, TPMS Reset, Immo(basic), Gear Learning, Sunroof Reset, Suspension, AFS Headlamp, BMS Reset, EG-R Reset, Throttle, A/F Reset, Language Set, Gearbox Reset, Coolant Bleed, Cylinder Power Balance, EPB Reset, ADBLUE, NOX Reset, ECU Configuration, Zero Point Calibration.

Some key service functions include:

• Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
• ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed air out of the ABS.
• EPB (Electric Parking Brake) Service: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
• BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
• DPF (Diesel Particle Filter) Service: Manages DPF regeneration, component replacement teach-in, and teach-in after replacing the engine control unit.
• IMMO (Immobilizer) Service: Disable a lost vehicle key and program replacement key fobs.
• SAS (Steering Angle Sensor) Service: Calibrate the steering wheel position as the straight-ahead position in the SAS EEPROM.
• AdBlue Reset: Perform reset operation after the diesel exhaust treatment fluid (car urea) is replaced or filled up.
• Language Change: Change the language originally set in the vehicle central control panel.
• NOx Sensor Reset: Reset the catalytic converter learned value stored in the engine ECU after the NOx sensor fault is clear and the NOx catalytic converter is replaced.
• Seats Calibration: Calibrate the seats equipped with memory function after they are replaced or repaired.
• Tire Reset: This function can set the size parameters of a tire after it is modified or replaced.
• Windows Calibration: Perform the door & window matching, so as to restore the ECU initial memory, and restore the automatic ascending & descending function of a power window.

ECU Coding

ECU Coding allows you to re-identify adaptive data for certain components after repairs or replacements, customize OE-settings (e.g., lighting, warning signals), and perform ECU data backup/recovery.

Figure 3-8: Advanced ECU Coding showing Online Parametric Configuration, Online Matching and Calibration, Rematch new modules to system, Aftermarket Installation, Modification/Changeover, Coding Backup/Reserve.

Online Coding: OTOFIX online servers will send coding values automatically for a quick and precise procedure. (Compatible with BMW, Porsche, VW, Infiniti, and Hyundai).

Offline Coding: You can manually input coding values for more customized builds. (Compatible with Ford, Mazda, Jaguar, Vauxhall, and Opel).

VAG Guided Functions

Targeted on different car models and configurations, there are related operation guidance that provides corresponding tips, auto log-in, matching, setting and coding. Having guided functions means having the company of an expert who can provide idea, help looking up maintenance manual and test functions while repairing a car.

Figure 3-9: Advanced Functions on Audi & VW including VAG Guided Functions (Free), ECU Coding (Subscribe), Online IMMO (Subscribe).

Generic OBDII Operations

The OBDII/EOBD vehicle diagnosis offers a quick way to check for DTCs, isolate the cause of a dashboard illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform other emissions-related services. The OBDII direct access option is also used for testing OBDII/EOBD-compliant vehicles that are not included in the database.

To access the OBDII/EOBD diagnostics functions:

1. Tap the Diagnostics application button in the OTOFIX Job Menu. The Vehicle Menu displays.
2. Tap the EOBD button. There are two options to establish communication with the vehicle:
• Auto Scan: Select to establish communication using each protocol in order to determine which one the vehicle is using.
• Protocol: Select to open a submenu of various protocols. A communication protocol is a standardized way of data communication between an ECM and a diagnostic tool. Global OBD may use several different communication protocols.
3. Select a specific protocol if the Protocol option is selected. Wait for the OBDII Diagnostic Menu to appear.
4. Select a function option to continue (DTC & FFD, I/M Readiness, Live Data, O2 Sensor Monitor, On-Board Monitor, Component Test, Vehicle Information, Vehicle Status).

3.4 Data Manager

The Data Manager allows you to store, print, and review saved files, manage workshop information, customer information records and store test vehicle history records.

Figure 3-10: Data Manager interface showing options for Vehicle History, Workshop Information, Customer, Image, Report, PDF, Review Data, Data Logging.

• Vehicle History: Stores vehicle test records and provides direct access to previously tested vehicles.
• Workshop Information: Input, edit, and save detailed workshop profile information.
• Customer: Create and edit customer accounts.
• Image: Database containing all captured screenshots in PNG format.
• Report: Stores and displays all diagnostic reports.
• PDF Files: Stores and displays all PDF files of saved data.
• Review Data: Play back recorded data frames from live data streams.
• Data Logging: Launch the Support platform to view records of all sent or unsent (saved) data loggings.

3.5 System Settings

Access the Settings menu to adjust default settings and view information about the OTOFIX diagnostics system.

• Unit: Change units of measurement.
• Language: Adjust display language.
• Print Settings: Setup printer connection and printing operations.
• Report Settings: Synchronize diagnostics information and upload reports to Cloud.
• Push Notifications: Manage notifications.
• Notification Center: Configure tablet to receive online messages for updates or service info.
• Auto Update: Set specific time for automatic software updates.
• Vehicle List: Sort vehicles by alphabetic order or frequency of use.
• System Settings: Direct access to Android system settings.
• About: Provides information about the OTOFIX diagnostics device (product name, version, hardware, serial number).

3.6 Software Updates

The internal programming of the OTOFIX Diagnostics System, known as the software, can be updated using the Update application. Software updates increase the OTOFIX applications' capabilities, typically by adding new tests, expanded vehicle coverage, or enhanced applications.

The device automatically searches for available updates for all of the OTOFIX components when it is connected to the Internet. Any updates that are found can be downloaded and installed on the device.

VCI Update

The Update module provides the latest update for the OTOFIX VCI. Before updating the VCI, please ensure your network connection is stable.

1. Power on the tablet. Insert the OTOFIX V1 to the vehicle's DLC.
2. Connect the V1 to the tablet via USB cable.
3. Tap VCI Manager on the OTOFIX Job Menu of the tablet.
4. Select VCI Update from the connection mode list.
5. The current version and the latest version of the device will be displayed. Tap Update Now to update the VCI.

NOTE:

The USB-C to USB-C cable should be purchased separately.

BAS Update

Before updating the BT1 Lite Smart Battery Tester, please ensure your network connection is stable.

1. Power on the battery tester and the tablet.
2. Connect the battery tester to the tablet via Bluetooth or USB cable.
3. Tap VCI Manager on the OTOFIX Job Menu of the tablet.
4. Select BAS Update from the connection mode list.
5. The current version and the latest version display on the page. Tap Update Now to update the battery tester.

3.7 Remote Desktop

The Remote Desktop application launches the TeamViewer Quick Support program — a simple, fast, and secure remote-control interface. You can use the application to receive ad-hoc remote support from Autel's support center, colleagues, or friends by allowing them to control your OTOFIX tablet on their PC via the TeamViewer software.

Make sure the tablet is connected to the Internet before launching the Remote Desktop application, so that the tablet is able to receive remote support from the third party.

1. Power on the tablet.
2. Tap the Remote Desktop application on the OTOFIX Job Menu. The TeamViewer interface appears and the device ID is generated and displayed.
3. Your partner must install the Remote Control software to their computer by downloading the TeamViewer program (full version) online (http://www.teamviewer.com). Start the software on their computer at the same time in order to provide support and take control of the tablet remotely.
4. Provide your ID to the partner, and wait for them to send you a remote control request.
5. A message displays to ask for your confirmation to allow remote control on your device.
6. Tap Allow to accept, or tap Deny to reject.

3.8 Battery Test

The OTOFIX BT1 Lite Smart Battery Tester is a battery and electrical system analysis tool that uses Adaptive Conductance, an advanced battery analysis method that produces more accurate examination of the battery's cold cranking ability and reserve capacity, vital to determining a battery's true health. The BT1 Lite enables technicians to view the health status of the vehicle's battery and electrical system.

NOTE:

The OTOFIX BT1 Lite Smart Battery Tester should be purchased separately.

The Battery Test application is accessible when the BT1 Lite Smart Battery Tester is used in combination with the OTOFIX diagnostic tablet. It provides four functions including in-vehicle test, out-vehicle test, battery change and battery reset to perform battery diagnosis. Please refer to the latest user manual of OTOFIX BT1 Lite Smart Battery Tester from the official website www.otofixtech.com for detailed operation.

3.9 MaxiViewer

The MaxiViewer allows you to search the functions supported by our tools and the version information. There are two ways of searching, either by searching the tool and the vehicle or searching the functions.

To search by the vehicle

1. Tap the MaxiViewer application on the OTOFIX Job Menu. The MaxiViewer application screen appears.
2. Tap the tool name from the dropdown list in the upper-left corner and select the one you want to search.
3. Tap the vehicle brand, model, and year you want to search.
4. All the functions supported by the selected tool for the selected vehicle are displayed within three columns: function, sub function, and version.

To search by the functions

1. Tap the MaxiViewer application on the OTOFIX Job Menu. The MaxiViewer application screen displays.
2. Tap the tool name on the top left to dropdown the tool list, tap the one you want to search.
3. Enter the function you want to search in the top right search box. The screen will display all vehicles that support this function, along with information such as the vehicles' year, system, capacity, type, function, sub-function, and version.

4. Maintenance and Service

To ensure that the tablet and the combined VCI unit perform at their optimum level, we advise that the product maintenance instructions covered in this section are strictly followed.

• Use a soft cloth and alcohol or a mild window cleaner to clean the touchscreen of the tablet. Do not use any abrasive cleansers, detergent, or automotive chemicals to the tablet.
• Keep the devices in dry conditions and within specified operating temperatures.
• Dry your hands before using the tablet. The touch screen of the tablet may not work if the touch screen is moist, or if you tap the touch screen with wet hands.
• Do not store the devices in humid, dusty or dirty areas.
• Check the housing, wiring, and connectors for dirt and damage before and after each use.
• Do not attempt to disassemble your tablet or the VCI unit.
• Do not drop or cause severe impact to the devices.
• Use only authorized battery chargers and accessories. Any malfunction or damage caused by the use of unauthorized battery charger and accessories will void the limited product warranty.
• Ensure that the battery charger does not come in contact with conductive objects.
• Do not use the tablet beside microwave ovens, cordless phones and some medical or scientific instruments to prevent signal interference.

5. Troubleshooting Checklist

• When the tablet does not work properly:
  • Make sure the tablet has been registered online.
  • Make sure the system software and diagnostic application software are properly updated.
  • Make sure the tablet is connected to the Internet.
  • Check all cables, connections, and indicators to see if the signal is being received.
• When battery life is shorter than usual:
  • This may happen when you are in an area with low signal strength. Turn off your device if it is not in use.
• When you cannot turn on the tablet:
  • Make sure the tablet is connected to a power source or the battery is charged.
• When you are unable to charge the tablet:
  • Your charger maybe out of order. Contact your nearest dealer.
  • You may be attempting to use the device in an overly hot/cold temperature. Charge the device in a cooler or warmer area.
  • Your device may have not been connected to the charger properly. Check the connector.

NOTE:

If the problems persist, please contact Autel's technical support personnel or your local selling agent.

About Battery Usage

Your tablet is powered by a built-in lithium-ion polymer battery, which enables you to recharge your battery when there is electricity left.

⚠️ DANGER:

The built-in Lithium-ion Polymer battery is factory replaceable only; incorrect replacement or tampering with the battery pack may cause an explosion.

• Do not use a damaged battery charger.
• Do not disassemble, open, crush, bend, deform, puncture, or shred the battery.
• Do not modify, remanufacture or attempt to insert foreign objects into the battery, or expose the battery to fire, explosion, or other hazards.
• Only use the specified charger and USB cables. Use of non-Autel-authorized charger or USB cables may lead to device malfunction or failure.
• Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazards.
• Avoid dropping the tablet. If the tablet is dropped, especially on a hard surface, and you suspect damage, take the tablet to a service center for inspection.
• Try to keep closer to your wireless router to reduce battery usage.
• The time needed to recharge the battery varies depending on the remaining battery capacity.
• Battery life inevitably shortens over time.
• Unplug the charger once the tablet is fully charged since overcharging may shorten battery life.
• Keep the battery in temperate environments. Do not place it inside a car when it is too hot or too cold, which may reduce the capacity and life of the battery.

6. Specifications

6.1 OTOFIX D1 Tablet Specifications

6.2 OTOFIX V1 VCI Specifications

6.3 Package Contents

Figure 6-1: Package Contents including Main Unit, OTOFIX V1, Carrying Case, Type C USB Cable, Power Adapter, USB to Ethernet Adapter, Quick Reference Guide, Packing List.

• 1x Main Unit (OTOFIX D1 Tablet)
• 1x OTOFIX V1 (VCI)
• 1x Carrying Case
• 1x Type C USB Cable
• 1x Power Adapter
• 1x USB to Ethernet Adapter
• 1x Quick Reference Guide
• 1x Packing List

7. User Tips

Based on common user inquiries and feedback, here are some tips for optimizing your OTOFIX D1 experience:

• Software Updates: Regularly check for and install software updates to ensure compatibility with the latest vehicle models and access new features. The device supports 2 years of free updates.
• Battery Management: For optimal battery life, avoid charging in extreme temperatures and unplug the charger once fully charged.
• VCI Connection: For stable communication, especially during critical diagnostic procedures, consider using a USB-C to USB-C cable for VCI connection if wireless connection is unstable.
• ECU Coding: When performing ECU coding, always back up the current coding information before making changes. This allows for easy restoration if needed.
• Vehicle Coverage: While the OTOFIX D1 supports over 140 car brands, specific advanced functions (like key programming) may vary by make, model, and year. Always verify compatibility for specific functions before attempting them.
• Remote Support: Utilize the Remote Desktop function with TeamViewer for quick assistance from Autel support technicians if you encounter complex issues.
• Data Management: Regularly save diagnostic reports and screenshots using the Data Manager. This helps in tracking vehicle history and sharing information.

8. Warranty and Support

8.1 12-Month Limited Warranty

Autel Intelligent Technology Corp., Ltd. (the Company) warrants to the original retail purchaser of this Diagnostic tablet that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship that results in product failure within twelve (12) months period from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company's option, without charge for parts or labor directly related to the defect(s).

NOTE:

If the warranty period is inconsistent with local laws and regulations, please comply with the relevant local laws and regulations.

The Company shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the device. Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you.

This warranty does not apply to:

• Products subjected to abnormal use or conditions, accident, mishandling, neglect, unauthorized alteration, misuse, improper installation or repair or improper storage;
• Products whose mechanical serial number or electronic serial number has been removed, altered or defaced;
• Damage from exposure to excessive temperatures or extreme environmental conditions;
• Damage resulting from connection to, or use of any accessory or other product not approved or authorized by the Company;
• Defects in appearance, cosmetic, decorative or structural items such as framing and non-operative parts.
• Products damaged from external causes such as fire, dirt, sand, battery leakage, blown fuse, theft or improper usage of any electrical source.

⚠️ IMPORTANT:

All contents of the product may be deleted during the process of repair. You should create a back-up copy of any contents of your product before delivering the product for warranty service.

8.2 For Services and Support

For technical assistance, please contact:

• Web: www.otofixtech.com
• Phone: +86-755-21612590
• Email: support@otofixtech.com
• Address: Floor 2, Caihong Keji Building, 36 Hi-tech North Six Road, Songpingshan Community, Xili Sub-district, Nanshan District, Shenzhen City, China

For technical assistance in other markets, please contact your local selling agent.

If it becomes necessary to return your device for repair, please download the repair service form from www.otofixtech.com, and fill in the form. The following information must be included:

• Contact name
• Return address
• Telephone number
• Product name
• Complete description of the problem
• Proof-of-purchase for warranty repairs
• Preferred method of payment for non-warranty repairs

9. Compliance Information

9.1 FCC Compliance

FCC ID: WQ8MAXIBASBT609

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

The device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 2.019 W/kg.