GODIAG GT113 Universal Fuel Injector Tester

Contents

GODIAG GT113 Universal Fuel Injector Tester and Cleaner Kit

Model: GT113

1. Introduction

The GODIAG GT113 is a versatile tool designed for testing and cleaning fuel injectors in gasoline engines. It supports a wide range of injector types, including EFI, GDI, FSI, MPFI, SPFI, TBI, CFI, L-JET, LPG, K-Jetronic, coil-type direct, and motorcycle injectors. This kit provides multiple pulse modes and voltage levels to accurately diagnose injector performance and identify faults.

2. Key Features

  • Universal Compatibility: Includes 6 sizes of cleaning adapters suitable for 12V and below 12V injectors.
  • Multiple Pulse Modes: Features 8 pulse modes (Short, Medium, Long, Continuous) and 2 output voltage levels (12V/5V).
  • Simultaneous Testing: Capable of testing two fuel injectors at the same time.
  • Clear Display: LCD display shows selected pulse mode, and indicator lights confirm pulse output status.
  • Safety Protections: Equipped with reverse polarity protection and short circuit protection.
  • Durable Construction: Test leads and power cords are made of high-quality silicone for flexibility and abrasion resistance.

3. Package Contents

Please check the package for the following items:

  • 1 x GODIAG GT113 Fuel Injector Tester
  • 2 x Battery Clamps
  • 6 x Cleaning Adapters (various sizes)
  • 1 x English User Manual
  • 1 x Carrying Bag

4. Product Overview

Familiarize yourself with the components of the GODIAG GT113 tester:

Diagram of GODIAG GT113 Fuel Injector Tester showing labeled components
Figure 1: GODIAG GT113 Product Structure

Component Descriptions:

  • Pulse output terminals: Connect to the fuel injectors for testing.
  • DC 12V input: Power input port for external DC 12V adapter.
  • Voltage indicator lights: Indicate the selected output voltage (5V or 12V).
  • Output status indicator lights: Flash to show the pulse output status during testing.
  • Operation mode indicator light: Indicates the current operating mode.
  • Battery clamps: Connect to a 12V vehicle battery for power.
  • Mode switch button (M): Cycles through the 4 pulse modes.
  • Voltage switch button (Voltage): Toggles between 5V and 12V output.
  • Start/Stop button: Initiates or terminates the test.
Front and back view of the GODIAG GT113 Fuel Injector Tester
Figure 2: Front and Back View of the GT113 Tester

5. Specifications

AttributeValue
Model NameGT113 Universal Fuel Injector Tester
Item TypeElectrical Testers & Test Leads
Brand NameGODIAG
Power Supply12V vehicle battery or external DC 12V (recommended at least 1.5A)
Applicable Injectors12V and below 12V injectors (EFI, GDI, FSI, MPFI, SPFI, TBI, CFI, L-JET, LPG, K-Jetronic, coil-type direct, motorcycle injectors)
Pulse Modes8 (Short, Medium, Long, Continuous)
Output Voltage Levels5V, 12V
External Testing CertificationCE
OriginMainland China
Item Weight0.5 kg
Item Dimensions (L x W x H)20 cm x 20 cm x 10 cm

6. Setup

  1. Power Connection:
    • Connect the provided battery clamps to a 12V vehicle battery (red clamp to positive, black clamp to negative).
    • Alternatively, connect an external DC 12V power adapter (recommended at least 1.5A) to the DC 12V input port.
  2. Injector Connection:
    • Select the appropriate cleaning adapter for your fuel injector.
    • Connect the injector(s) to the pulse output terminals using the test leads. The GT113 supports testing two injectors simultaneously.

7. Operating Instructions

The GT113 offers various pulse modes and voltage settings for comprehensive injector testing.

Back panel of GT113 showing mode selection instructions
Figure 3: GT113 Back Panel with Mode Selection Details
  1. Select Pulse Mode:
    • Press the 'M' (Mode) button to cycle through the 4 pulse signal output modes. The selected mode will be displayed on the LCD.
    • The available modes are:
      • Mode 1 (Short): One pulse, pulse width 255ms.
      • Mode 2 (Medium): 50 pulses, pulse width 7ms.
      • Mode 3 (Long): 100 pulses, pulse width 3.5ms.
      • Mode 4 (Continuous): Continuous pulses, rated at 50 pulses/250ms, pulse width 3.5ms.
  2. Select Voltage Level:
    • Press the 'Voltage' button to switch between 5V and 12V output. The corresponding voltage indicator light will illuminate.
  3. Start/Stop Test:
    • Once the desired mode and voltage are selected, press the 'Start/Stop' button to begin the test.
    • The output status indicator lights will flash rapidly to indicate active pulse output.
    • To stop the test, press the 'Start/Stop' button again.
  4. Important Note: Mode selection and voltage switching are only available when the test is stopped.

8. Maintenance

  • Keep the device clean and dry. Wipe with a soft, damp cloth if necessary.
  • Store the GT113 and its accessories in the provided carrying bag when not in use to protect it from dust and damage.
  • Regularly inspect the test leads and power cords for any signs of wear or damage. Replace if necessary.

9. Troubleshooting

  • Device not powering on: Ensure the 12V power source (vehicle battery or external adapter) is correctly connected and providing sufficient power (at least 1.5A for external adapter).
  • No pulse output during test: Check if the battery clamps are incorrectly connected (reverse polarity). The internal protection circuit will prevent operation. Also, ensure that the two ends of the output terminal are not short-circuited or that two red/black wires are not used to connect a single injector, as this will prevent the kit from operating.
  • Cannot change mode or voltage: Ensure the test is stopped before attempting to change the pulse mode or voltage level.

10. User Tips

  • The GT113 can be used in conjunction with any fuel pressure tester for a more comprehensive diagnostic approach.
  • This tool is specifically designed for gasoline engines. Do NOT use it with diesel engines.
  • Please note that the package does not include a separate power supply or injector cleaning agent. These must be acquired separately if needed.

11. Warranty and Support

The GODIAG GT113 Fuel Injector Tester comes with a One Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the GODIAG Official Store directly. Please have your purchase details and product model number (GT113) ready when contacting support.

12. Safety Precautions

  • Always wear appropriate personal protective equipment, such as safety glasses, when working with automotive systems.
  • Ensure proper ventilation when working with fuel or cleaning agents.
  • Do not operate the device in wet conditions or with wet hands.
  • Keep the device away from open flames, sparks, and heat sources.
  • Ensure all connections are secure before operating the tester.
  • Do not attempt to disassemble or modify the device. Refer all servicing to qualified personnel.
  • The electrical plugs are designed for use in the US. Outlets and voltage may differ internationally. Please check compatibility and use appropriate adapters or converters if necessary for your destination.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.