1. Product Introduction
The Yieryi Smart Solar WiFi Irrigation Timer is an intelligent water valve controller designed for automatic watering systems. It features photovoltaic charging, allowing for operation in direct sunlight. This product is ideal for various outdoor and indoor applications such as villa courtyards, balcony gardens, rooftop gardens, home green walls, micro-sprinkler systems, construction site dust removal, vegetable garden drip irrigation, and general sprinkler irrigation.
The device is built with UV-resistant material and boasts a waterproof level 5 rating, meaning it can withstand heavy rain but should not be immersed in water. For indoor use or during prolonged periods without direct sunlight, a TYPE-C charging port is available to ensure continuous power.
Key Features:
- WiFi Connectivity for remote control via Tuya/Smart Life APP.
- Solar Charging Panel with adjustable angle for optimal sunlight exposure.
- Built-in Rechargeable Battery (2000mAh for YG-388, 500mAh for YG-388S).
- Rainwater Sensing Area for automatic rain delay function.
- Manual Activation and Shutdown options.
- Timed Automatic Watering scheduling.
- Low Battery Warning.
- TYPE-C Charging Port for alternative power.
2. Product Components
Familiarize yourself with the main components of your irrigation timer:
Key Description (Buttons):
- Manual Activation Button: Short press to enter manual watering mode.
- Manual Shutdown Button: Short press to turn off watering and enter automatic mode.
- Distribution Key: Used for network distribution. Refer to network instructions for details.
Indicator Light Description:
- Green light flashing: Watering in progress.
- Red light on for a long time: Charging.
- Red light off: The battery is fully charged.
- Fast flashing red light: In the distribution network (pairing mode).
3. Setup Guide
3.1 App Installation
To control your irrigation timer remotely, you need to download the 'Smart Life' app:
- Scan the QR code below or search for "Smart Life" in your device's app store.
- Download and install the app.
3.2 Network Connection (Pairing)
For a smooth connection, ensure your phone and the device are close to your router and that your phone is connected to a 2.4GHz WiFi network (or a 2.4G/5G mixed signal network).
- Charge the Host: Fully charge the device for about 4 hours. Short press the manual activation button to wake it up. The red light will flash, indicating it's in distribution mode.
- Open Smart Life App:
- Bluetooth Auto-Search: The app may automatically search for devices. Select your device and follow the prompts.
- Scan QR Code: Click the '+' symbol in the upper right corner of the app, then scan the QR code on the device (or in the manual) to add the water valve controller.
- Manual Add: Click the '+' symbol, select 'Industry and Agriculture' -> 'Water Valve Controller (Wi-Fi)', and follow the prompts.
- Confirmation: Once the red light stops flashing, network distribution is successful.
If network configuration fails, long press the distribution key for 5 seconds to reconfigure the network.
3.3 Physical Installation
Before permanent installation, it is recommended to perform a test run to ensure the device functions correctly and there are no leaks.
- Connect the irrigation timer to your water source (e.g., outdoor tap) using the six-point movable joint.
- Attach your irrigation hoses and accessories to the hexagonal threaded joint(s) at the bottom of the timer.
- Position the device in a location with direct sunlight to maximize solar charging. The solar panel can be rotated and adjusted to optimize sun exposure.
4. Operation
4.1 Manual Control
- To start manual watering: Short press the manual activation button.
- To stop manual watering and enter automatic mode: Short press the manual shutdown button.
- To shut down the device completely: Press and hold the manual shutdown button for five seconds.
4.2 App Control (Smart Life App)
The Smart Life app provides comprehensive control over your irrigation system:
- Remote On/Off: Control the opening and closing of water valves from anywhere.
- Timed Automatic Watering: Set single, multiple, or weekly timed schedules for irrigation.
- Rain Delay Mode: Utilize the rainwater sensing area to automatically skip watering schedules when it rains.
- Real-time Monitoring: View device status, battery level, and watering history.
- Equipment Sharing: Share control of the device with other users.
- Low Battery Warning: Receive notifications when the battery is low.
- Customization: Modify equipment name and location, and set individual timing for each outlet (for double-hole models).
5. Maintenance
- Clean Water Source: Always use a clean water source. Tap water may contain impurities. The movable joint contains a stainless steel filter screen; clean it regularly to prevent blockages.
- Solar Panel Adjustment: Periodically check and adjust the angle of the solar panel to ensure it receives maximum direct sunlight throughout the year for optimal charging.
- Seasonal Program Reset: Due to varying water requirements for plants across seasons, it is advisable to reset your irrigation program each season to match plant needs.
- Winter Storage: This product is not designed for operation in low temperatures (below 0°C). During cold weather, disassemble the unit and store it indoors to prevent structural damage. Damage caused by freezing is not covered by warranty.
6. Troubleshooting
- Device Not Turning On: If the product does not open upon receipt, it might be in child lock mode. Press the child lock button for 4 seconds, then press the exit button for 6 seconds to switch on the machine.
- Network Connection Issues: If the device fails to connect to the network, ensure your phone is on a 2.4GHz WiFi network and both the device and phone are close to the router. Try long-pressing the distribution key for 5 seconds to re-enter pairing mode.
- Water Leakage: Ensure all connections are tight and properly sealed. Check the filter screen for any debris that might be preventing a proper seal.
- Limited Scheduling Options: Some users have noted that the app's scheduling might have limitations (e.g., not allowing watering every hour). Review the app's available scheduling features to confirm if it meets your specific needs.
- No Functionality Without Internet: The device requires an active internet connection for full app-controlled functionality. Bluetooth alone is not sufficient for remote operation.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Model | YG-388 (Single Hole) / YG-388S (Double Hole) |
| Type | Automatic Irrigation Equipment |
| Water Pressure | 0.3 - 8 KG |
| Flow Rate | 8L - 31L/min |
| Water Temperature | 1 - 60 °C |
| Power Supply | Solar + Built-in 2000mAh (YG-388) / 500mAh (YG-388S) Rechargeable Battery |
| Charging Port | TYPE-C |
| Irrigation Schedule | Single/Multiple/Weekly Timed Schedule via App |
| Waterproof Level | IPX5 (Resistant to rain, not immersion) |
| Material | UV Resistant |
8. Warranty and Support
8.1 Warranty Terms
A three-month free warranty and repair service is provided for products sold. Within this period, any damage caused by poor material or design defects will be repaired free of charge. After three months, maintenance and replacement services will incur a cost.
The following product defects are not covered under free maintenance:
- Water ingress or dampness resulting from incorrect installation.
- Voltage mismatch leading to the host burning out.
- Repair or modification not authorized by the manufacturer.
- Damage due to other force majeure factors.
8.2 Additional Resources
A detailed user manual is available in PDF format for further reference: User manual (PDF)
9. User Tips
- For optimal solar charging, always place the device in a location that receives direct sunlight for extended periods.
- Ensure a stable 2.4GHz WiFi connection for reliable app control and remote management.
- If the unit does not power on initially, check for the child lock feature. The suggested method to unlock is to press the child lock button for 4 seconds, then the exit button for 6 seconds.
- Regularly clean the stainless steel filter screen located within the movable joint to prevent blockages and maintain optimal water flow.
- Be aware that the app's scheduling capabilities might have certain limitations, such as not allowing watering every hour. Verify if the available options meet your specific irrigation needs.
- The device requires an active internet connection for its smart features to function fully; Bluetooth connectivity alone is not sufficient for comprehensive control.