Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your EZonetronics Wireless Carplay Android Auto Module. This upgrade kit is designed to enhance the infotainment system of compatible Porsche vehicles with modern smartphone integration features.

Figure 1: EZonetronics PCM 3.1 Upgrade Kit overview.

Figure 2: Key features of the wireless interconnection system.
Compatibility
This module is compatible with Porsche vehicles equipped with the PCM 3.1 system. Refer to the table below for specific model and year compatibility:
| Car Model | Years | Screen Inch |
|---|---|---|
| Cayenne/718 | 2010-2016 | 7" |
| Panamera | ||
| Macan | ||
| 911 | ||
| Boxster (implied by 718/911 context) |
Note: The module is specifically designed for PCM3.1 systems.
Setup and Installation
9.1 Kit Contents
The package includes the main module board and various cables necessary for installation. The main module board is a circuit board with multiple connectors. The cables include:
- Power cables
- USB cable
- Video input cables (Rear CVBS, Front CVBS, Panoramic input)
- External MIC cable
- OEM cables
- Antenna
(Refer to the user manual PDF for a visual representation of the kit contents and cable connection chart.)
9.2 Cable Connection Chart and Installation Notes
A detailed cable connection chart is provided in the official user manual PDF. It illustrates how to connect the module to your vehicle's existing wiring harness and infotainment system. Key connections include:
- Connecting the main module to the PCM 3.1 unit.
- Connecting power, USB, and video input cables.
- Connecting the external microphone.
- Placing the antenna outside the chassis for optimal signal reception.
Important: After all cables are connected, press and hold the "Back" and "INFO" buttons on your car's console for 3 seconds to switch between the PCM 3.1 original car interface and the CarPlay interface.
For a comprehensive visual guide on cable connections, please consult the User Manual (PDF), specifically the "Cable connection chart" section.
Operating Instructions
3. Wireless CarPlay Connection Method
- Open the system's wireless CarPlay connection.
- Turn on your phone's Bluetooth and WiFi, and keep them on.
- Select the Bluetooth device name as "CAR_XXXX" (e.g., CAR-Seba). Pair your phone and confirm "Use CarPlay" when the request window pops up.
(Refer to the user manual PDF for screenshots of the CarPlay connection process.)
4. Wireless Android Auto Connection Method
- Open the system's wireless Android Auto connection.
- Turn on your phone's Bluetooth and WiFi, and keep them on.
- Select the Bluetooth device name as "CAR_XXXX" (e.g., CAR-Seba). Pair your phone. After successful Bluetooth pairing, follow the on-screen Android Auto connection process.

Figure 3: Android Auto features and interface examples.

Figure 4: Android Auto in-car experience.
5. Apple Wireless Screen Mirroring (AirPlay)
- On the module's interface, select "AirPlay".
- On your iPhone, keep WiFi on. Connect to the WiFi network named "CAR-WIFI-XXX". The password is
66668888. - After the CarPlay WiFi connection is successful, pull down the status bar on your iPhone, select "Screen Mirroring", and then tap "Airplay".
(Refer to the user manual PDF for screenshots of the Apple Wireless Screen Mirroring process.)
6. Android Wireless Screen Mirroring (AutoLink)
- On the module's interface, select the "AutoLink" icon.
- Use your Android phone to scan the QR code displayed on the screen (or use the provided URL) to download and install the AutoLink app.
- In your phone's settings, ensure AutoLink is set to "ON".
- Keep WiFi on, and connect to the WiFi network named "CAR-WIFI-XXXX". The password is
66668888. - Open the AutoLink Pro app, search for "CAR-WIFI-XXXX", connect, and then click "START NOW".

Figure 5: Mirror-Link functionality in action.
7. Sound Output
There are two primary methods for sound output:
A. A&V Separation (for cars with factory Bluetooth)
- Turn on the setting:
Settings > System > Use car'BT channel. - After connecting CarPlay, pair your phone's Bluetooth with the factory Porsche car's Bluetooth.
- Choose the original microphone for audio input.
B. AUX Mode (for cars without factory Bluetooth)
- Select AUX as the audio source.
- Install the external microphone.
- Navigate to:
Settings > CarSetting > Car USB Port > CarPlay Module.

Figure 6: Factory Bluetooth integration for high-quality audio.
(Refer to the user manual PDF for screenshots of sound output settings.)
8. Reversing Settings
To configure reversing camera functionality:
- Navigate to
Reversing Settings. - Select the camera type:
Original Camera. - Options for Parking Line, Radar, Reverse Camera Mirror, and Front Camera Mirror can be toggled ON/OFF as needed.
(Refer to the user manual PDF for screenshots of reversing settings.)
10. Steering Wheel Button Control
The module integrates with your vehicle's steering wheel controls for convenient operation. Note that operation methods may vary slightly between different Porsche models.
| Button/Action | Function |
|---|---|
| Answer call / Hang up (Steering Wheel) | Answer or end a call. |
| Long press for 3 seconds (Steering Wheel) | Switch the system. |
| Long press for 10 seconds (Steering Wheel) | Force system upgrade. |
| Short press (Steering Wheel) | Hang up. |
| Long press (Steering Wheel) | Wake up Siri. |
| Answer call (Console) | Answer a call. |
| Audio channel switching (Console) | Switch audio channels. |
| Hang up call (Console) | End a call. |
| Rotate left/right (Console) | Adjust volume. |
| Long press for 10 seconds (Console) | Restore the system. |
| Long press (Console) | Switch the system. |
| Short press (Console) | Return. |
| Long press for 10 seconds (Console) | Force system upgrade. |
| Previous song (Console) | Go to previous song. |
| Next song (Console) | Go to next song. |
| Knob control (Console) | General navigation and selection. |
(Refer to the user manual PDF for visual diagrams of steering wheel and console controls.)
Specifications
- Product Type: Wireless Carplay Android Auto Module
- Compatibility: Porsche PCM3.1 systems (Cayenne, Panamera, Macan, Boxster, 911, 718 models, 2010-2016, 7" screen)
- Features: CarPlay, Android Auto, Mirror Link (AirPlay, AutoLink), USB Video Playback, Reversing Video Input, Voice Control, Factory Bluetooth integration.
- Package Dimensions: Length: 26 cm, Width: 21 cm, Height: 8 cm
- Package Weight: 0.566 kg
- High-concerned chemical: None
- Origin: Mainland China
Troubleshooting
- Q: CarPlay/Android Auto not connecting wirelessly.
- A: Ensure your phone's Bluetooth and WiFi are both enabled and connected to the module's WiFi network ("CAR-WIFI-XXXX", password
66668888). Follow the pairing instructions carefully, especially confirming "Use CarPlay" or the Android Auto prompts. - Q: No sound output from the module.
- A: Check your sound output settings. If your car has factory Bluetooth, ensure "Use car'BT channel" is enabled and your phone is paired to the car's Bluetooth. If not, select AUX mode and ensure the external microphone is installed and configured via
Settings > CarSetting > Car USB Port > CarPlay Module. - Q: Screen mirroring (AirPlay/AutoLink) is not working.
- A: Verify that your phone is connected to the module's WiFi ("CAR-WIFI-XXXX", password
66668888). For Android, ensure the AutoLink app is installed and enabled. For Apple, confirm "Screen Mirroring" is activated from your iPhone's control center. - Q: The system does not switch between original PCM and module interface.
- A: Press and hold the "Back" and "INFO" buttons on your car's console for 3 seconds. If this does not work, re-check all cable connections.
User Tips
- Cable Quality: For wired connections (e.g., Mirror-Link, USB Video Playback), use high-quality data cables to ensure stable and efficient data transmission.
- Antenna Placement: Ensure the wireless antenna is placed outside the chassis for optimal signal strength and connection stability.
- Firmware Updates: Periodically check the manufacturer's website or contact support for potential firmware updates that may improve performance or add features.
- Bluetooth Pairing: When connecting wirelessly, remember to pair your phone's Bluetooth first, then follow the on-screen prompts for CarPlay or Android Auto.
Warranty and Support
For warranty information, technical support, or further assistance, please contact EzoneTronics Official Store directly. Keep your purchase records handy when seeking support.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF).