1. Introduction
Thank you for choosing the UGREEN Studio Max2 Wireless Bluetooth Headphones. These headphones are designed to deliver high-fidelity audio with advanced features such as Bluetooth 5.4 connectivity, 80 hours of playtime, and physical noise isolation. This manual will guide you through the setup, operation, and maintenance of your new headphones to ensure optimal performance and longevity.
2. Package Contents
Please check the package for the following items:
- UGREEN Studio Max2 Wireless Bluetooth Headphones
- Charging Cable (USB-C)
- User Manual

3. Product Overview
Familiarize yourself with the headphone's controls and features:

- Volume Up (+): Short press to increase volume.
- Volume Down (-): Short press to decrease volume.
- Next Track: Press and hold '+' for 2 seconds.
- Previous Track: Press and hold '-' for 2 seconds.
- Play/Pause/Answer/End a call (Power Button): Short press.
- Activate Voice Assistant: Short press the Power Button twice.
- Decline a call: Press and hold the Power Button for 1 second.
- Enter Pairing Mode: Refer to the 'Bluetooth Pairing' section for detailed instructions.
- EQ Switch Button: Located on the side, allows switching between sound equalization modes.
4. Setup
4.1 Charging the Headphones
Before first use, fully charge your headphones.
- Connect the provided USB-C charging cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power source (e.g., computer, wall adapter).
- The indicator light will show charging status. It takes approximately 1.5 hours for a full charge.
- A full charge provides about 80 hours of operating time. A 5-minute charge can provide 5 hours of playback.

4.2 Power On/Off
- Power On: Press and hold the Power Button until the indicator light turns on.
- Power Off: Press and hold the Power Button until the indicator light turns off.
4.3 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power Button for approximately 5 seconds until the indicator light flashes rapidly (usually blue and red), indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "UGREEN Studio Max2" from the list of found devices.
- Once connected, the indicator light will stop flashing and remain solid blue (or similar, refer to LED guide if available).
4.4 Dual Devices Connection
The headphones support connecting to two devices simultaneously, allowing for easy switching between them.
- Pair the headphones with the first device following the steps in 4.3.
- Disable Bluetooth on the first device.
- Put the headphones back into pairing mode and pair with the second device.
- Re-enable Bluetooth on the first device. The headphones should now be connected to both devices.
- To switch audio, simply play media on the desired device.

5. Operating Instructions
5.1 Audio Features
- UGREEN Golden Audio Quality: Experience high-fidelity sound with full detail retention.
- 40mm Dynamic Drivers: Enjoy powerful bass and clear, bright mid-high frequencies.
- Physical Noise Isolation: The headphones offer up to -35dB of physical noise cancellation, improving performance by 27% for a more immersive listening experience.
- 0.06s Ultra Low Latency: Provides a synchronized audio experience, particularly beneficial for gaming.
- AI Call Noise Reduction: Dual microphones combined with AI algorithms ensure clear voice transmission during calls, even in noisy environments.

5.2 UGREEN App Control
Enhance your experience by using the dedicated UGREEN app. The app allows you to:
- Check battery level.
- View connection status.
- Select from 8 EQ sound effects (Classic, Jazz, POP, Electronic, Genteel, Rock, HICH, BassUp).
- Customize various settings.

6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones. Do not use harsh chemicals or abrasive materials.
- Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Water: Do not expose the headphones to water or excessive moisture.
- Handle with Care: Avoid dropping or subjecting the headphones to strong impacts.
7. Troubleshooting
- Cannot Power On: Ensure the headphones are fully charged.
- Cannot Pair with Device: Make sure the headphones are in pairing mode (flashing indicator light) and within range of your device. Try restarting both the headphones and your device.
- No Sound: Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired.
- Intermittent Connection: Move closer to your device and away from potential interference sources (e.g., Wi-Fi routers, other Bluetooth devices).
- Charging Issues: Ensure the charging cable is securely connected and the power source is functional. Try a different cable or power adapter.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | UGREEN Studio Max2 |
| Model | HP205 |
| Material | Metal, PVC |
| Communication | Wireless+Wired |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.4 |
| Frequency Band | 2400MHz-2480MHz |
| Max. RF Output Power | 4dBm |
| Transmission Distance | 15m/49.2ft Max (no blocking) |
| Bluetooth Profile | HFP/HSP/AVRCP/A2DP/BLE/SPP |
| Codecs | AAC/SBC |
| Frequency Response | 20Hz-20kHz |
| Charging Port | USB-C |
| Battery Type | Polymer Lithium-ion Battery |
| Capacity | 600mAh 3.7V (2.22Wh) |
| Limited Charging Voltage | 5.25V |
| Charging Case Input | 5V=600mA |
| Charging Time | About 1.5 hours |
| Operating Time | About 80 hours |
| With Microphone | Yes |
| Volume Control | Yes |
| Control Button | Yes |
| Active Noise-Cancellation | No (Physical Noise Isolation) |
| Support APP | Yes |

9. User Tips
- Utilize the UGREEN App: For the best experience and to unlock all features, download and use the official UGREEN app. It allows for EQ customization and monitoring of headphone status.
- Quick Charge for Convenience: If you're in a hurry, remember that a quick 5-minute charge can provide 5 hours of playback, perfect for short trips or unexpected use.
- Comfortable Fit: The headphones are designed with stress-relieving leather and adjustable features to fit various face shapes for long-wearing comfort. Adjust the headband and earcups for the most comfortable seal.
10. Warranty and Support
UGREEN provides a 2-year warranty for the Studio Max2 headphones. For technical support, warranty claims, or any questions regarding your product, please contact UGREEN customer service through their official website or the retailer where you purchased the product.