1. Introduction
Thank you for choosing the TOOLIOM TL-28800G Auto Darkening Welding Helmet. This helmet is designed to provide superior eye and face protection during welding, cutting, and grinding operations. Featuring true color technology, a large viewing area, and multiple adjustments, it ensures comfort and clarity for various tasks. Please read this manual thoroughly before use to ensure proper operation and safety.
Image: The TOOLIOM TL-28800G Auto Darkening Welding Helmet.
2. Safety Information
WARNING: Failure to read, understand, and follow all instructions can result in serious injury.
- Always wear appropriate safety glasses underneath the welding helmet.
- Do not use the helmet if the auto-darkening function is not working correctly.
- Ensure the helmet is properly fitted and adjusted before starting any work.
- Do not expose the helmet to extreme temperatures or moisture.
- Regularly inspect the helmet and lens for any damage. Replace damaged parts immediately.
- This helmet is not suitable for laser welding applications.
3. Product Features
- Auto Darkening Lens: Automatically darkens upon arc strike, protecting your eyes.
- Optical Clarity: Rated 1/1/1/1 for superior visual quality.
- Large Viewing Area: 4.31" x 3.81" main viewing area with additional side views for enhanced peripheral vision.
- True Color Technology: Reduces lime green tint, providing a clearer and more natural view of the workpiece.
- Multi-Adjustments: External knobs for mode selection (Weld/Cut/Grind), shade, sensitivity, and delay time.
- Built-in LED Lamps: Three LED lights illuminate the workpiece and workspace for improved visibility.
- Dual Power Source: Solar-powered with Type-C charging capability.
- Comfortable Headgear: Butterfly-style headgear with breathable cushion, multiple adjustments, sweatproof, antiskid, and damp-proof design.
- Certifications: Meets ANSI Z87.1, EN379, and CE standards.
Image: Overview of the TL-28800G's key features.
4. Setup
4.1 Headgear Assembly and Adjustment
- Attach the headgear to the helmet shell. Ensure all fasteners are secure.
- Place the helmet on your head and adjust the top strap for proper height.
- Use the rear knob to adjust the circumference of the headgear for a snug, comfortable fit.
- Adjust the side knobs to set the viewing angle and distance from your face. The helmet should sit comfortably without obstructing your view or being too close.
Image: Headgear adjustment points for a comfortable and secure fit.
4.2 Initial Lens Check
Before first use, or after extended storage, perform a lens check:
- Ensure the helmet is exposed to light to charge the solar panel.
- Press the 'Test Knob' (2 in the diagram below) to verify the auto-darkening function. The lens should momentarily darken and then return to its clear state.
- Check the 'Low Battery' indicator (1 in the diagram below). If illuminated, charge the helmet via the Type-C port.
Image: Diagram of lens components and controls.
5. Operating Instructions
5.1 Powering On/Off and LED Control
The helmet is primarily solar-powered. For additional power or charging, use the Type-C port.
- The auto-darkening function is always active when the helmet is exposed to light.
- Use the 'LED Control Button' (3 in the lens diagram) to cycle through OFF, ON, and AUTO modes for the built-in LED lamps.
Image: The helmet's three built-in LED lamps providing illumination.
5.2 Mode Selection and Adjustments
The helmet features external adjustment knobs for various settings:
Image: External adjustment knobs for various settings.
- Mode Switch (WELD/CUT/GRIND): Select the appropriate mode for your task.
- GRIND Mode (DIN 4): For grinding operations, the lens remains in a light shade (DIN 4) to protect against sparks and debris without darkening.
- CUT Mode (DIN 5-9): For cutting applications, offering adjustable shade levels from DIN 5 to DIN 9.
- WELD Mode (DIN 9-13): For welding, providing adjustable shade levels from DIN 9 to DIN 13.
- SHADE Knob: Adjusts the darkness level of the lens according to the selected mode and welding/cutting amperage. Refer to welding shade charts for guidance.
- SENSITIVITY Knob: Controls how sensitive the arc sensors are to light. Adjust for different ambient light conditions and arc intensity.
- DELAY TIME Knob: Sets the time it takes for the lens to return to its clear state after the arc stops. Adjust for different applications to prevent eye fatigue.
Image: Setting the helmet to DIN 4 Grind Mode.
Image: Setting the helmet to DIN 5-9 Cut Mode.
Image: Setting the helmet to DIN 9-13 Weld Mode.
6. Maintenance
6.1 Cleaning
- Clean the helmet shell with a mild soap and water solution. Avoid harsh chemicals or solvents.
- Wipe the auto-darkening filter (ADF) and cover lenses with a soft, lint-free cloth. Do not use abrasive materials.
- Keep the arc sensors (5 in the lens diagram) clean and unobstructed.
6.2 Charging and Storage
- The helmet is primarily solar-powered. Ensure the solar panel (6 in the lens diagram) is exposed to light regularly.
- If the low battery indicator is on, charge the helmet using a Type-C cable.
- Store the helmet in a dry, cool place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lens does not darken when welding. |
|
|
| Poor visibility through the lens. |
|
|
| Helmet feels uncomfortable. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | TL-28800G |
| Optical Clarity Rating | 1/1/1/1 |
| Viewing Area | 4.31" x 3.81" (Main) + Side Views |
| Light State Shade | DIN 4 |
| Variable Dark Shade | DIN 5-9 (Cut Mode), DIN 9-13 (Weld Mode) |
| Auto Darkening Speed | 1/30000S |
| Power Supply | Solar Cell + Type-C Charging |
| Helmet Material | PP (Polypropylene) |
| LED Lamps | 3 Built-in |
| Certifications | ANSI Z87.1, EN379, CE |
9. User Tips
- Always test the auto-darkening function before each use, especially if the helmet has been stored for a while.
- Keep the helmet's solar panel exposed to light when not in use to maintain its charge.
- Experiment with the sensitivity and delay settings to find what works best for your specific welding environment and personal preference.
- For optimal clarity, regularly clean both the inner and outer cover lenses, as well as the main auto-darkening filter.
10. Warranty and Support
For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.