E-ACE B56P

Contents

E-ACE B56P 4K Dash Cam User Manual

Model: B56P

1. Introduction

Thank you for choosing the E-ACE B56P 4K Dash Cam. This device is designed to provide high-quality video recording of your journeys, offering enhanced safety and security features for your vehicle. This manual will guide you through the installation, operation, and maintenance of your dash cam to ensure optimal performance.

E-ACE B56P 4K Dash Cam with GPS and WiFi logos

Figure 1: E-ACE B56P 4K Dash Cam

2. Safety Information

  • Ensure the dash cam is installed in a location that does not obstruct the driver's view or interfere with vehicle safety features.
  • Do not operate the dash cam in extreme temperatures outside the specified working temperature range (-20℃ to 70℃).
  • Use only the provided power charger and accessories to avoid damage to the device.
  • Keep the device away from water and moisture.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.

3. Package Contents

The contents of your package may vary depending on the specific variant purchased:

3.1. Only 4K Dashcam (B56P)

  • 1 x 4K Dashcam (Front camera only)
  • 1 x Original Power Charger with GPS module
  • 1 x User Manual
  • 1 x USB Card Reader (Gift)
  • 1 x Electrostatic Sticker
Packing list for B56P-Only 4K Dashcam variant

Figure 2: Package contents for B56P-Only 4K Dashcam

3.2. B56P-6M RC (with 6-meter Rear Camera)

  • 1 x 4K Dashcam (Front camera)
  • 1 x Original Power Charger with GPS module
  • 1 x User Manual
  • 1 x USB Card Reader (Gift)
  • 1 x Electrostatic Sticker
  • 1 x Sony 1080P Rearview Camera with 6 Meters Cable
Packing list for B56P-6M RC variant

Figure 3: Package contents for B56P-6M RC

3.3. B56P-10M RC (with 10-meter Rear Camera)

  • 1 x 4K Dashcam (Front camera)
  • 1 x Original Power Charger with GPS module
  • 1 x User Manual
  • 1 x USB Card Reader (Gift)
  • 1 x Electrostatic Sticker
  • 1 x Sony 1080P Rearview Camera with 10 Meters Cable
Packing list for B56P-10M RC variant

Figure 4: Package contents for B56P-10M RC

4. Setup and Installation

4.1. Device Overview

Diagram showing dash cam dimensions and port locations: Power on/off button, Type-C port, Rear lens port, Memory card slot.

Figure 5: Dash Cam Ports and Dimensions

Top and side view diagrams of the dash cam with dimensions: 33mm height, 50mm width, 95mm length.

Figure 6: Dash Cam Dimensions

4.2. Basic Installation

  1. Insert Memory Card: Ensure the dash cam is off. Insert a Class 10 Micro SD Card (16GB to 256GB, not included) into the memory card slot.
  2. Mount the Dash Cam: Attach the dash cam to your windshield using the electrostatic sticker and mount. Position it to have a clear view of the road without obstructing your driving vision.
  3. Connect Power: Plug the provided power charger into your car's 12V power outlet and connect the other end to the dash cam's Type-C port.
  4. Connect Rear Camera (if applicable): If you have a rear camera, connect its cable to the designated rear lens port on the main dash cam unit. Route the cable neatly along the vehicle's interior.

Video 1: Dash Cam Installation and App Connection Demonstration

4.3. Hardwire Kit Installation (for 24H Parking Monitoring)

To enable 24-hour parking monitoring without occupying the cigarette lighter interface, you will need to install the Hardwire Kit (if purchased separately). This requires connecting to your vehicle's fuse box.

  1. Identify Fuse Slots: Locate your vehicle's fuse box. You will need two fuse slots:
    • One that provides constant power (for the RED wire).
    • One that provides power only when the key is in the ACC position (for the YELLOW wire).
  2. Connect Wires:
    • Connect the RED wire of the hardwire kit to the constant power fuse slot.
    • Connect the YELLOW wire of the hardwire kit to the ACC power fuse slot.
    • Connect the BLACK wire to a grounding screw or bolt on the vehicle's chassis.
  3. Connect to Dash Cam: Plug the hardwire kit's output into the dash cam's power input.
Wiring diagram for hardwire kit installation showing connections to GND, ACC, and BAT&ACC(+) in a fuse box.

Figure 7: Hardwire Kit Installation Reference

Note: The DVR is only compatible with cars that have a 12V power supply. A 24V power supply will burn the motherboard. If your vehicle uses 24V, you must use a 24V to 12V converter. Ensure you use E-ACE customized specifications for the KIT, as third-party kits may not be compatible.

5. Operating Instructions

5.1. Power On/Off and Display Modes

  1. Power On: The dash cam will automatically power on and begin recording when your vehicle starts (or when power is supplied via the hardwire kit). You can also long-press the power on/off button to manually boot the device.
  2. Display Modes: The 1.47-inch OLED screen supports four display modes, which can be cycled by pressing the corresponding button:
    • Front view
    • Rear view
    • Standby mode (displays date and time)
    • App QR code (for easy app download)
Diagram showing the dash cam's OLED screen and its four display modes: Front lens, Rear lens, Connect WIFI mode (QR code), and Standby mode with date/time.

Figure 8: OLED Screen Display Modes

5.2. Recording Features

  • Automatic Recording: The dash cam automatically starts recording when powered on.
  • Loop Recording: When this feature is enabled and the memory card is full, the oldest recorded files will be overwritten by new recordings. Important events triggered by the G-Sensor or Parking Monitor are locked and protected from being overwritten.
  • Dual Channel Recording: If a rear camera is connected, both front (4K) and rear (1080P) cameras record simultaneously, saving videos to the TF card. The rear camera can also function as an internal camera.
Illustration of dual channel recording showing internal recording, rear cam view, and front cam view.

Figure 9: Dual Channel Recording

Image showing 4K front recording (3840x2160) and 1080P rear recording (1920x1080) for clear image quality.

Figure 10: 4K Front and 1080P Rear Recording

5.3. Advanced Features

  • Super Night Vision & WDR: The dash cam features a lens with night vision capabilities and Wide Dynamic Range (WDR) processing, ensuring clear recordings even in low-light conditions or at night.
Graphic highlighting Super Night Vision and WDR features with icons for Night Vision, Aperture F/1.7, and Super Sensor.

Figure 11: Super Night Vision & WDR

Example of night driving footage captured by the dash cam, demonstrating night vision clarity.

Figure 12: Night Vision Example

  • G-Sensor: When your car is subjected to an impact or sudden movement, the G-Sensor automatically triggers, causing the recorder to immediately save and lock the current video file, protecting it from being overwritten.
  • Parking Monitor: If you are concerned about your car being damaged while parked, the DVR can be connected via the hardwire kit to monitor for 24 hours. If an impact is detected, the DVR will immediately turn on and record the situation.
Graphic illustrating additional features: Loop Recording, Parking Monitor, G-Sensor, and WDR Dynamic Light Processing.

Figure 13: Additional Features

5.4. WiFi Control and App Usage

  1. Download the App: Download and install the 'Viidure' app on your Android or iPhone. The QR code for the app can be found on the dash cam's screen or in the manual.
  2. Connect to Dash Cam WiFi: Enable WiFi on your smartphone and connect to the dash cam's WiFi network. The network name and password can typically be found in the dash cam's settings or on the device itself.
  3. App Functions: Once connected, you can use the app to:
    • View real-time video feed.
    • Take photos.
    • Record videos.
    • Download recorded files to your phone.
    • Control DVR settings.
Screenshot of the Viidure app interface showing live video feed and control options like Take Photo, Watch Video, APP Control, Download Files.

Figure 14: WiFi Control with Viidure App

Image showing the Viidure app download options for App Store and Android.

Figure 15: Viidure App Download

5.5. GPS Functionality

The dash cam includes a GPS module to accurately log your vehicle's location, speed, latitude, longitude, and route. This information can be viewed on the Viidure app or a compatible GPS player on your computer.

  1. GPS Connection: When connecting the GPS module for the first time, allow some time for it to acquire a satellite signal and locate.
  2. Status Indicator: The GPS icon on the dash cam screen will change from red to green once positioning is successful.
  3. Viewing Tracks: After successful positioning and logging into the mobile app, you can view your driving trajectory and speed.
Image showing a laptop displaying a map with a driving route and a smartphone showing vehicle speed, illustrating GPS tracking.

Figure 16: GPS Tracking Driving Location

Series of phone screens demonstrating GPS connection: initial app screen, WiFi connection, entering password, and map view with tracks.

Figure 17: GPS Connection Process

6. Maintenance

  • Memory Card Care: Regularly format your Micro SD card (at least once a month) to prevent data corruption and ensure smooth recording. Always use a high-quality Class 10 (or higher) TF card from a reputable brand.
  • Cleaning: Use a soft, dry cloth to clean the dash cam lenses and screen. Avoid using abrasive cleaners or solvents.
  • Operating Environment: Operate the dash cam within its specified working temperature range of -20℃ to 70℃. Prolonged exposure to extreme heat or cold can affect performance and lifespan.

7. Troubleshooting

Q: The dash cam does not power on or frequently restarts.
A: Ensure the power supply is 12V. Using a 24V power supply without a compatible 24V to 12V converter will damage the motherboard. Check all power connections are secure.
Q: Video recording is choppy or shows errors.
A: This is often due to a low-quality or slow memory card. Ensure you are using a high-quality Class 10 (or higher) Micro SD card. Format the card regularly. If the issue persists, try a different memory card.
Q: The rear camera is not working or displaying correctly.
A: The E-ACE dash cam is designed to work optimally with its original rear camera due to specific chipset and sensor compatibility. Ensure the rear camera is securely connected. If you are using a third-party rear camera, it may not be compatible.
Q: GPS is not tracking location or speed.
A: Ensure the GPS module is properly connected. Allow sufficient time (several minutes) for the GPS module to acquire a satellite signal, especially during the first use or after a long period of inactivity. Check if the GPS icon on the screen changes from red to green, indicating a successful connection.
Q: Cannot connect to the dash cam via WiFi or the app.
A: Ensure WiFi is enabled on your dash cam and smartphone. Verify that you are connecting to the correct WiFi network name and entering the correct password. Try restarting both the dash cam and your smartphone.

8. Specifications

FeatureSpecification
Model NumberB56P
Chipset ManufacturerNOVATEK (Novatek 96670)
Imaging SensorSONY IMX415
Number Of Lenses2 (Front + Rear)
Camera ResolutionFront: 3840x2160; Rear: 1920x1080
Max Video Frame Rate25 FPS
View AngleFront: 170°; Rear: 140°
ApertureF1.6 (Front), F2.0 (Rear)
Pixels800Mega
Display Size<3" (1.47 Inch OLED)
Screen Ratio16:9
Touch ScreenNo
Video CodeH.264
Video FormatMPEG-4, TS
Memory Card Required Reading SpeedClass 10
Data Storage CapacityUp to 128G (Max External Memory)
Built-in ScreenYes
Loop-Cycle Recording FeatureYes
Audio RecordedYes
NightShot FunctionYes
Rear CameraYes (Optional)
GPS LoggerExternal
WiFi FunctionYes
APP CompatibilityYes (Viidure app for Android/iOS)
Parking MonitorYes
Power SourceCorded Electric (12V)
BatteryBuilt-in (Battery Life: Lasts until the battery is low)
Working Temperature-20℃~70℃
InterfaceAV-In, USB2.0, Micro SD/TF
OSD LanguageArabic, Belarusian, Chinese (Simplified), Chinese (Traditional), Czech, Dutch, English, French, Greek, Hungarian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Slovak, Spanish, Thai, Turkish, Vietnamese (changeable via app)
Weight0.35kg
Cable Length (Rear Cam)6M or 10M (Optional)
CertificationCE, FCC, RoHS

9. Warranty & Support

The E-ACE B56P Dash Cam comes with a 365-day warranty for free replacement, subject to warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly.

10. User Tips

  • Regularly Check Recordings: Periodically review your dash cam footage to ensure it is recording correctly and that video quality meets your expectations.
  • Keep Firmware Updated: Check the E-ACE website or Viidure app for any available firmware updates to ensure your dash cam has the latest features and bug fixes.
  • Secure Cables: Neatly route and secure all cables to prevent them from interfering with driving controls or becoming a distraction.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.