COOLMOON C200EX C260EX Neon Rainbow Cable

Contents

COOLMOON ARGB LED PC Cable Instruction Manual

Models: C200EX, C260EX Neon Rainbow Cables

Brand: COOLMOON

1. Introduction

The COOLMOON ARGB LED PC Motherboard Synchronous Cable is designed to enhance the aesthetic of your computer build with vibrant, customizable lighting. These flexible silicone cables extend the reach of your Addressable RGB (ARGB) lighting, allowing for synchronized visual effects across your PC components. Available in C200EX and C260EX models, they cater to different power supply configurations for graphics cards and motherboards.

COOLMOON ARGB LED PC Cable
An example of the COOLMOON ARGB LED PC Cable, showcasing its rainbow lighting effect and connectors.

2. Safety Information

  • Ensure your computer is powered off and unplugged from the wall outlet before installation.
  • Handle all components with care to avoid damage.
  • Do not force connectors; ensure proper alignment before plugging in.
  • Verify that your motherboard has a 5V 3-pin ARGB header. This cable is NOT compatible with 12V 4-pin RGB headers. Connecting to an incompatible header may cause damage to the cable or motherboard.
  • Use the provided insulated protective caps on any unused 5V 3-pin interfaces to prevent short circuits.

3. Package Contents

The package includes:

  • 1 x COOLMOON ARGB Extension Cable (C200EX or C260EX model, in selected color)

4. Specifications

FeatureDetail
Brand NameCOOLMOON
Model NumbersC200EX, C260EX
TypePower Cable (Luminescent Cable)
MaterialFlexible Silicone, High-purity Optical Fiber Wire Rod
Cable LengthApprox. 50 cm (19.68 inches)
Color OptionsBlack, White
VoltageDC 5V
Interface Type5V 3-Pin (x2), Small 4-Pin (for COOLMOON 6P controller)
C200EX CompatibilityFor 24-Pin Motherboard Power Supply, 3x8-Pin Graphics Card Power Supply
C260EX CompatibilityFor Single 8-Pin Graphics Card Power Supply, Double 8-Pin Graphics Card Power Supply
LED QuantityC200EX: 56 Pcs, C260EX: 36 Pcs
Package Weight0.32 kg
Package Dimensions25 cm (Length) x 6 cm (Width) x 2 cm (Height)
CertificationCE
OriginMainland China
C200EX and C260EX Cable Specifications
Visual comparison of C200EX and C260EX models, showing dimensions and compatibility.

5. Setup & Installation

Follow these steps to install your COOLMOON ARGB LED PC Cable:

  1. Prepare Your System: Power off your computer and unplug it from the power source. Open your PC case to access the internal components.
  2. Identify Cable Type: Determine whether you need the C200EX or C260EX model based on your power supply and graphics card configuration.
    • C200EX: For 24-Pin Motherboard Power Supply and 3x8-Pin Graphics Card Power Supply.
    • C260EX: For Single 8-Pin or Double 8-Pin Graphics Card Power Supply.
  3. Connect Power:
    • For C200EX, connect the 24-Pin end to your motherboard's 24-Pin power connector.
    • For C200EX, connect the 3x8-Pin end to your graphics card's 3x8-Pin power connectors.
    • For C260EX, connect the 8-Pin or Double 8-Pin end to your graphics card's corresponding power connectors.
    C200EX Installation Diagram
    Installation diagram for C200EX showing connection to 24PIN motherboard power supply line and 3x8PIN graphics card power cord. Note the use of cable ties to secure the neon line.
  4. Connect ARGB Synchronization:
    Multi-Interface Design Diagram
    Diagram illustrating the multi-interface design: A (5V 3Pin Female), B (5V 3Pin Male), C (Insulated Protective Cap), D (Small 4Pin Interface).
    • 5V 3Pin Female (A): Plug this into your motherboard's 5V ARGB synchronization header. This allows your motherboard's software to control the cable's lighting effects.
    • 5V 3Pin Male (B): Use this connector to daisy-chain other 5V ARGB products, synchronizing their lighting with the cable.
    • Insulated Protective Cap (C): Always cover any unused 5V 3Pin interfaces with this cap to prevent accidental short circuits.
    • Small 4Pin Interface (D): This is a dedicated interface for COOLMOON 6P controllers. If you are using a COOLMOON controller, connect it here.
  5. Cable Management: Route the cable neatly within your PC case. Use cable ties (not included) to secure the cable and trim any excess for a clean build.
  6. Final Check: Double-check all connections to ensure they are secure and correctly oriented.
  7. Power On: Close your PC case, plug in your computer, and power it on.

6. Operating Instructions

Once installed and connected to a compatible 5V 3-pin ARGB header on your motherboard or a COOLMOON controller, the ARGB LED PC cable will illuminate. To control the lighting effects:

  • Motherboard Software: Use your motherboard's dedicated ARGB control software (e.g., ASUS Aura Sync, ASRock Polychrome Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to customize colors, patterns, and synchronization with other ARGB components.
  • COOLMOON Controller: If connected to a COOLMOON 6P controller, use the controller's interface or software (if applicable) to manage the lighting effects.
ARGB Sync Compatibility
The cable supports various motherboard ARGB synchronization technologies for a unified lighting experience.

7. Maintenance

  • Cleaning: Gently wipe the cable with a dry, soft cloth to remove dust. Do not use liquid cleaners directly on the cable or connectors.
  • Handling: Avoid sharp bends, twists, or excessive pulling on the cable to prevent damage to the internal optical fibers and wiring.
  • Storage: If removing the cable, store it in a clean, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

Problem: No light or incorrect colors.
Solution:
  • Ensure the 5V 3-pin ARGB connector is securely plugged into the correct 5V ARGB header on your motherboard or controller.
  • Verify that your motherboard's ARGB software is installed and configured correctly.
  • Check if the power supply to the graphics card/motherboard is adequate and stable.
  • Confirm that you are using a 5V 3-pin ARGB header, not a 12V 4-pin RGB header.
Problem: Lights are flickering or inconsistent.
Solution:
  • Check all connections for looseness. Re-seat the connectors firmly.
  • Ensure the power supply is stable and not overloaded.
  • If daisy-chaining multiple ARGB devices, try connecting the cable directly to the motherboard to rule out issues with other devices.
Problem: Cable not recognized by software.
Solution:
  • Ensure the 5V 3-pin ARGB connector is correctly attached to the motherboard's ARGB header.
  • Update your motherboard's BIOS and ARGB control software to the latest versions.
  • Restart your computer.

9. User Tips

  • Cable Routing: Plan your cable routing carefully before installation to achieve a clean and organized look inside your PC case. The flexible silicone material allows for easier bending and shaping.
  • ARGB Header Check: Always double-check your motherboard manual to confirm the location and voltage (5V 3-pin) of your ARGB header. Incorrect connection can damage components.
  • Aesthetic Placement: Neon lines can be placed horizontally on the plane of the chassis, which is larger than ordinary light strips, offering a more pronounced lighting effect.

10. Warranty & Support

For warranty information and technical support, please refer to the manufacturer's official website or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.