1. Product Overview
The MILESEEY BNV20 and BNV21 are infrared night vision binoculars designed for observation in low-light and complete darkness conditions. They are suitable for various activities including hunting observation, night fishing, security monitoring, and outdoor camping.
Key features include:
- Day and Night Vision capabilities
- Dual IR (Infrared) illumination modes with 3 adjustable levels
- Photography and Video recording functions
- Data output for transferring captured media
- High-definition IPS display screens
- Optical and electronic magnification


2. Package Contents
Upon opening your package, please verify that all items are present and in good condition:
- Night Vision Binoculars (BNV20 or BNV21 model)
- USB Cable
- Shoulder Strap
- Cleaning Cloth
- User Manual
- Carrying Case
- Battery (pre-installed or separate, depending on model)
- SD Card (optional, may be included or purchased separately)

3. Setup
3.1 Battery Installation
The BNV20 model uses a 2000mAh rechargeable battery, while the BNV21 uses an 18650 Lithium battery. Ensure the battery is fully charged before first use.
- Locate the battery compartment on the device.
- Open the battery compartment cover.
- Insert the battery according to the polarity markings (+/-).
- Close the battery compartment cover securely.

3.2 Memory Card Installation
To store photos and videos, a microSD card (up to 8GB shown in image) is required.
- Locate the SD card slot, often near the USB port.
- Gently insert the microSD card into the slot until it clicks into place.
- To remove, push the card in slightly until it springs out.
3.3 Initial Power On and Basic Settings
After installing the battery, press and hold the power button to turn on the device. You may need to adjust initial settings.
- Language: Navigate to the settings menu to select your preferred language (e.g., English).
- Date & Time: Set the correct date and time for accurate timestamps on your recordings.
- Flicker: Adjust the flicker setting (e.g., 50Hz or 60Hz) to match your region's electrical frequency to avoid flickering in recordings.
4. Operating Instructions
4.1 Power On/Off
- To power on: Press and hold the power button until the screen illuminates.
- To power off: Press and hold the power button until the screen shuts down.
4.2 Display and Magnification
The BNV20 features a 4.5-inch observed screen size, while the BNV21 has a 3.5-inch IPS screen. Both models offer 5x optical magnification and up to 8x electronic magnification.

- Use the zoom buttons (typically marked with '+' and '-') to adjust the electronic magnification.
- The high-definition screen and horizontal grip design provide a comfortable viewing experience, even for users wearing glasses.

4.3 Infrared (IR) Illumination
The binoculars feature a dual IR illuminator with 3 adjustable levels to enhance visibility in varying low-light conditions.
- Press the IR button to cycle through the illumination levels (Level 1, Level 2, Level 3).
- Level 1 provides near-light infrared radiation, suitable for closer observations.
- Levels 2 and 3 provide a longer-range infrared beam for distant objects.
- Adjust the IR level according to the ambient light and observation distance for the clearest image.

4.4 Photography and Video Recording
The device supports both photography and video recording in 720P HD mode.
- To take a photo: Press the photo button (usually marked with a camera icon).
- To record video: Press the video button (usually marked with a video camera icon). Press again to stop recording.
- Ensure a microSD card is inserted to save your media.
4.5 System Settings
Access the settings menu to customize various parameters for optimal performance.
- Image Size: Adjust the resolution of captured images.
- Switch Mode: Select between "Game mode", "Pro mode", and "Pure mode" based on your observation needs.
- LCD Brightness: Adjust the display brightness from level 1 to 5.
- WB (White Balance): Set the white balance (e.g., Sunlight) to optimize color representation.
- EC (Exposure Compensation): Adjust exposure compensation from -2 to +2 to brighten or darken the image.
- Audio: Turn audio recording On or Off for videos.
- Date Tag: Enable or disable date and time stamps on your photos and videos.
- Auto Off: Set the device to automatically power off after 1 or 3 minutes of inactivity to conserve battery.
- Format: Format the inserted SD card to clear all data and ensure proper functioning.
- Reset: Reset all settings to factory defaults.
- Version: View the device's firmware version (e.g., BNV20_10715).
5. Maintenance
5.1 Cleaning
- Use the provided cleaning cloth or a soft, lint-free cloth to gently wipe the lenses and display screen.
- For stubborn smudges, use a lens cleaning solution specifically designed for optics.
- Do not use abrasive materials or harsh chemicals, as they can damage the lenses and coatings.
- Clean the exterior of the device with a soft, damp cloth.
5.2 Battery Care
- Always use the recommended battery type (2000mAh rechargeable for BNV20, 18650 Lithium for BNV21).
- Charge batteries fully before extended storage.
- Remove batteries if the device will not be used for a long period to prevent leakage.
- Dispose of old batteries responsibly according to local regulations.
5.3 Storage
- Store the binoculars in their carrying case when not in use to protect them from dust, moisture, and physical damage.
- Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Device does not power on:
- Ensure the battery is correctly installed and fully charged.
- Try charging the battery for at least 2 hours.
- Image is unclear or blurry:
- Adjust the focus ring on the objective lens.
- Increase the IR illumination level in dark conditions.
- Adjust the LCD brightness and exposure compensation (EC) in the settings.
- Clean the lenses with the provided cleaning cloth.
- Cannot record photos or videos:
- Ensure a compatible microSD card is inserted.
- Check if the microSD card has sufficient free space.
- Try formatting the microSD card through the device's settings menu (this will erase all data).
- Settings are not saving:
- Perform a factory reset through the settings menu.
7. Specifications
| Feature | BNV20 | BNV21 |
|---|---|---|
| Brand/Logo | MILESEEY | ACPOTEL/MILESEEY |
| Modes | Game mode, professional mode, pure mode | |
| Magnification | 5x optical magnification and 8x electronic magnification | |
| Infrared compensation light adjustment | 1-3 levels | |
| Photographing | Yes | |
| Video recording | Yes | |
| Playback | Yes | |
| Observed screen size | 4.5 inch | 3.5 inch IPS (internal 3-inch IPS) |
| Battery Type | 2000mAh Rechargeable Battery | 18650 Lithium Battery |
| Observation Distance (BNV21) | N/A | 500m/1640FT |

7.1 Package Dimensions
- Length: 30 cm
- Width: 25 cm
- Height: 20 cm
- Weight: 1.5 kg
8. User Tips
- Zoom Adjustment: The device features both optical and electronic magnification. Use the electronic zoom for finer adjustments to bring distant objects closer.
- Optimal Night Vision: Experiment with the three IR illumination levels to find the best setting for your environment. Higher levels provide more light but can also be more visible to others.
- Battery Life: To maximize battery life, use the "Auto Off" feature and adjust LCD brightness to the lowest comfortable setting. Carry spare batteries for extended use in the field.
- Clear Viewing: Regularly clean the lenses to ensure optimal image clarity, especially before and after use in dusty or humid conditions.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.