1. Introduction
This manual provides essential information for the safe and efficient use of your PowMr 100AH 25.6V LiFePO4 Battery. Please read this manual thoroughly before installation and operation, and keep it for future reference.
Image: PowMr 25.6V LiFePO4 Battery, highlighting 100Ah capacity and 6000+ cycles.
2. Safety Information
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
- Always use appropriate personal protective equipment (PPE) when handling batteries.
- Do not short-circuit the battery terminals.
- Do not expose the battery to fire or extreme heat.
- Do not immerse the battery in water.
- Ensure proper ventilation during charging and operation.
- Keep out of reach of children.
3. Key Features
- High Cycle Life: Designed for over 6000 cycles, ensuring long-term reliability.
- Advanced BMS: Independent research and development BMS (Battery Management System) for superior protection.
- Low Temperature Self-Heating: Enhances performance in colder environments.
- High Rate Discharge: Capable of high rate and high current discharge.
- Enhanced Safety: High safety and reliability features.
- Robust Adaptability: Strong carrying capacity, suitable for various environments including plateaus, plains, and mountainous areas.
- Wide Application: Ideal for power tools, home appliances, boats, electric bicycles/scooters, electric forklifts, electric vehicles, electric wheelchairs, electric power systems, solar energy, and storage systems.
Image: Internal view of the LiFePO4 battery, showcasing Grade A cells and Superior BMS Protection against over-load, over-discharge, short circuit, over-current, cell voltage issues, and over-heating.
Image: Built-in BMS System tested in 7 ways: Low Temperature Performance Test, High Temperature Performance Test, Constant Temperature/Humidity Test, Vibration Test, Over-charge Test, Over-discharge Test, Short circuiting Test.
4. Specifications
Image: Parametric table for the 25.6V 100AH LiFePO4 Deep Cycle Battery, including dimensions and key specifications.
| Parameter | Value |
|---|---|
| Battery Type | LiFePO4 |
| Voltage | 25.6V |
| Nominal Capacity | 100AH |
| Energy Density | 2560WH |
| Dimensions (L*W*H) | 485*170*240mm |
| Weight | 21KG |
| Terminal Type | M8 |
| Terminal Torque | 8.5NM |
| Case Material | ABS |
| BMS Built-in | YES |
| AH Efficiency-round trip | >98% |
| Self Discharge per Month | <3% |
| Max in Parallel | 4PCS |
| Max in Series | 4PCS |
| Voltage Window | 21.6-29.2V |
| Recommend Charge Voltage | 29.2V |
| Max Charge Voltage | 29.2V |
| Recommend Charge Current | 20A |
| Max Continuous Current | 100A |
| Recommend Discharge Voltage | 22.4V |
| Max Discharge Voltage | 20V |
| Max Discharge Current | 100A |
| Peak Discharge Current | 180A/3S |
| Cycle life | 6000 Cycles |
| Discharge Temperature | (-2 to 55)°C |
| Charge Temperature | (0 to 55)°C |
| Storage Temperature | (0 to 45)°C |
Note: Specifications are subject to change without notice. Refer to the product label for the most accurate information.
5. Setup and Installation
5.1 Unpacking
Carefully remove the battery from its packaging. Inspect for any visible damage. If damage is found, contact your supplier immediately.
5.2 Connection
- Ensure all connections are clean and free of corrosion.
- Connect battery terminals using appropriate M8 size connectors.
- Tighten terminal connections to a torque of 8.5NM to ensure good electrical contact and prevent overheating.
- The battery supports up to 4 units in series and up to 4 units in parallel. When connecting multiple batteries, ensure all batteries are at a similar state of charge before connecting them in parallel.
- Always connect positive to positive and negative to negative for parallel connections. For series connections, connect positive of one battery to negative of the next.
Image: Illustration of multiple batteries connected in a rack, demonstrating series and parallel connection capabilities.
5.3 Charging
- Use a compatible 25.6V LiFePO4 charger or a lead-acid charger suitable for LiFePO4 batteries.
- Recommended charge voltage: 29.2V.
- Maximum charge voltage: 29.2V.
- Recommended charge current: 20A.
- Ensure the charger is connected correctly (positive to positive, negative to negative).
- Charge temperature range: 0 to 55°C.
Image: The battery connected to a solar charger and a 25.6V LiFePO4 / Lead-acid charger.
6. Operation
The PowMr LiFePO4 battery is designed for deep cycle applications and can be used in various scenarios:
- RV & Marine: Powering recreational vehicles and marine vessels.
- Solar Energy Systems: Storing energy from solar panels for off-grid or backup power.
- Camping: Providing reliable power for outdoor adventures.
- Home Appliances & Power Tools: Suitable for demanding applications requiring stable power.
- Electric Vehicles: Can be integrated into electric bicycles, scooters, forklifts, and wheelchairs.
Image: Multiple application scenarios for the battery, including RV trips, marine use, solar energy systems, and camping.
Image: Energy saving illustration demonstrating the battery's capacity to power household appliances like light bulbs, refrigerators, coffee makers, and air conditioners with 2560WH energy.
7. Maintenance and Storage
7.1 General Maintenance
- Regularly check battery terminals for cleanliness and tightness.
- Keep the battery clean and dry.
- Monitor battery voltage and charge levels periodically.
7.2 Storage
- Store the battery in a cool, dry place away from direct sunlight and heat sources.
- Recommended storage temperature: 0 to 45°C (32 to 113°F).
- The battery has a low self-discharge rate of less than 3% per month, but it is recommended to charge it every 3-6 months during long-term storage to maintain optimal health.
- Ensure the battery is stored at a partial state of charge (e.g., 50% SOC) for extended periods.
Image: Wide temperature range for storage (-4°F ~ 140°F) and discharge (10°F ~ 131°F).
8. Troubleshooting
The integrated BMS provides comprehensive protection, minimizing common issues. If you encounter problems, consider the following:
- No Power Output: Check all connections for tightness and proper polarity. Verify the battery voltage is within the operational range (21.6V-29.2V). The BMS might have activated a protection mode (e.g., over-discharge, over-current). Disconnect the load and attempt to recharge.
- Battery Not Charging: Ensure the charger is compatible and functioning correctly. Check charging voltage and current settings. Verify the charge temperature is within the acceptable range (0 to 55°C).
- Reduced Performance: This could indicate an aging battery (though unlikely with 6000+ cycles) or operation outside recommended temperature ranges. Ensure the battery is not consistently discharged below 20V.
- Overheating: Disconnect the battery from all loads and chargers immediately. Allow it to cool down in a well-ventilated area. Check for short circuits or excessive load.
If issues persist, contact customer support for further assistance.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your vendor directly. Keep your proof of purchase for warranty claims.