Introduction
The ATOTO FHD02LR is a high-definition 1080P backup rear camera designed to enhance your driving safety and recording capabilities. It features Wide Dynamic Range (WDR) for clear imaging in various lighting conditions, a 140° wide viewing angle, IP67 waterproofing for durability, and night vision for improved visibility in low light. This camera supports loop recording and Live Rear-View (LRV) functionality, making it a comprehensive solution for your vehicle's rear monitoring needs. It is specifically designed for compatibility with ATOTO X10 Series car stereos.


What's in the Box
Please check the package contents to ensure all items are present:
- AC-FHD02LR Rear Recording Camera
- Extension Cable for AC-FHD02LR (8m/26ft)
- Adapter Cable
- Online Manual Page (This document)

Compatibility
The ATOTO FHD02LR camera is designed for specific compatibility. Please ensure your car stereo system meets the requirements:
- Only Compatible with: ATOTO X10 Series car stereos.
- Not Compatible with: ATOTO S8 Series, A6 PF/PP Series, F7 Series, or PND Series.
- Required (Not Included): A USB Card Reader and a High-Endurance MicroSD card (up to 128GB) are necessary for recording functionality. Standard MicroSD cards are not recommended for continuous recording.

Setup and Installation
Installing the ATOTO FHD02LR camera involves mounting the camera and connecting it to your compatible ATOTO X10 Series car stereo.
Mounting the Camera
- Choose a suitable location on the rear of your vehicle for optimal viewing. This is typically above the license plate or near the trunk handle.
- Securely mount the camera using the provided bracket and hardware. Ensure the camera is stable and its view is unobstructed.
- Adjust the camera angle to achieve the desired rear view.
Wiring Connections
- Route the extension cable from the camera to the location of your ATOTO X10 Series car stereo. Ensure the cable is protected from sharp edges, heat, and moving parts.
- Connect the camera's video output to the designated rear camera input on your ATOTO X10 Series stereo.
- Connect the power cable of the camera to a suitable power source. Typically, this involves connecting to the vehicle's reverse light circuit for automatic activation when reversing, and a constant power source for parking surveillance (if supported by your stereo and wiring).
- Use the adapter cable if necessary for specific connections.
- Carefully conceal all wiring to prevent damage and maintain a tidy installation.
Note: For complex installations, especially in larger vehicles like motorhomes, it is recommended to consult a professional installer to ensure correct wiring and optimal performance.
Operating Instructions
FHD 1080P Real-time Recording
The camera captures clear 1080P video footage in real-time, ensuring that crucial details are not missed during your drive. When connected to a compatible ATOTO X10 Series stereo with a high-endurance MicroSD card, the camera will record continuously.
Live Rear-View (LRV)
The LRV feature allows you to clearly see what is behind your vehicle even when it is moving forward, providing an extended field of vision beyond traditional mirrors. This function is accessible through your ATOTO X10 Series stereo interface.

GPS Track Playback
When integrated with your ATOTO X10 Series stereo and GPS module, the camera's recordings can be synchronized with GPS data, allowing you to review video footage and see the exact location and route where every moment happened.

Strong Light Suppression & Wide Dynamic Range (WDR)
The camera is equipped with advanced technology for strong light suppression and Wide Dynamic Range (WDR). This ensures clear footage even when facing the glare of oncoming headlights or in scenes with significant variations between bright and dark areas, capturing details effectively.

Built-in G-sensor & Outage-proof
The built-in G-sensor automatically detects sudden collision events, such as impacts or hard braking, and locks the current video footage to prevent it from being overwritten. The outage-proof feature ensures that footage is automatically saved even if there is a sudden power loss to the camera.

Parking Surveillance
With proper wiring and configuration through your ATOTO X10 Series stereo, the camera can provide 24/7 parking surveillance. It automatically activates, captures, and locks a key 30-second video clip if an impact or motion is detected while your vehicle is parked, acting as a reliable guardian even when you are away.

Specifications
| Feature | Specification |
|---|---|
| Brand Name | ATOTO |
| Model | FHD02LR |
| Resolution | 1080P |
| Viewing Angle | 140° |
| Lens Material | Glass |
| Guiding Line | Yes |
| Wire or Wireless | Wire |
| Length of Video Cable | Various lengths available (e.g., 2m, 6m, 10m) |
| Waterproof Rating | IP67 |
| Night Vision | Yes |
| Loop Recording | Yes |
| WDR (Wide Dynamic Range) | Yes |
| G-sensor | Yes |
| Alarm Type | Alarm Systems, Vehicle Backup Cameras, ACCESSORIES, Rear Side |
| Certification | CE, FCC, RoHS |
| Material | Stainless steel |
| Origin | Mainland China |
Package Dimensions and Weight
- Weight: 0.32 kg
- Dimensions: 10 cm (Length) x 10 cm (Width) x 3 cm (Height)

Maintenance
To ensure the longevity and optimal performance of your ATOTO FHD02LR camera, follow these maintenance guidelines:
- Cleaning the Lens: Regularly clean the camera lens with a soft, damp cloth to remove dirt, dust, or water spots that may obstruct the view. Avoid abrasive cleaners.
- Checking Connections: Periodically inspect all wiring connections to ensure they are secure and free from corrosion or damage. Loose connections can lead to intermittent signal loss.
- Housing Inspection: Check the camera housing for any signs of physical damage or cracks, especially after severe weather conditions or impacts.
- Software Updates: ATOTO provides lifetime free firmware and software updates. Regularly check for and install updates for improved performance and new features.
Troubleshooting
If you encounter issues with your ATOTO FHD02LR camera, refer to the following common troubleshooting steps:
- No Image on Screen:
- Ensure the camera is correctly connected to the ATOTO X10 Series stereo's rear camera input.
- Verify that the camera is receiving power. Check the power connections and fuses.
- Confirm that the car stereo is set to display the rear camera input when reversing or manually activated.
- Check for compatibility issues (ensure it's an X10 Series stereo).
- Blurry or Distorted Image:
- Clean the camera lens thoroughly.
- Check for any physical damage to the lens or camera housing.
- Ensure the video cable is not damaged or kinked.
- Verify that the camera is securely mounted and not vibrating.
- Recording Issues:
- Ensure a high-endurance MicroSD card (up to 128GB) is inserted and properly formatted.
- Check if the MicroSD card is full; enable loop recording if not already active.
- Verify that the USB Card Reader is functioning correctly.
- Intermittent Signal:
- Inspect all cable connections for looseness or corrosion.
- Check for electromagnetic interference from other vehicle electronics.
If the problem persists after attempting these steps, please contact ATOTO customer support for further assistance.
User Tips
- Professional Installation for Large Vehicles: For installations in larger vehicles like RVs or motorhomes, consider professional assistance. The extended wiring runs and specific power requirements might necessitate specialized knowledge to ensure a stable and reliable connection.
- Use High-Endurance MicroSD Cards: For continuous loop recording, always use a high-endurance MicroSD card (up to 128GB). Standard cards may degrade quickly under constant write cycles.
- Regular Firmware Updates: Keep your ATOTO X10 Series stereo and camera firmware updated. Updates often include performance improvements, bug fixes, and new features that can enhance your experience.
- Optimal Camera Placement: Experiment with the camera's mounting position to find the best balance between wide-angle coverage and clear visibility of critical areas behind your vehicle.
Warranty and Support
ATOTO stands by the quality of its products. The FHD02LR camera comes with a 365-day warranty period.
- Warranty Period: 365 Days from the date of purchase.
- Technical Support: ATOTO provides lifetime technical support for its products.
- Software Updates: Customers receive lifetime free firmware, software, user interface, and GPS navigation map updates to ensure optimal performance and compatibility.
For any warranty claims, technical assistance, or support inquiries, please contact ATOTO customer service directly.