REDTIGER F7N ELITE

Contents

REDTIGER F7N ELITE 4K Dash Cam User Manual

Model: F7N ELITE | Brand: REDTIGER

1. Introduction and Overview

The REDTIGER F7N ELITE is a high-performance 4K Dash Cam designed to provide comprehensive vehicle surveillance. Featuring a STARVIS 2 sensor, built-in 5.8GHz WiFi, and GPS, it offers advanced recording capabilities and smart interaction features for a safer and more convenient driving experience. This manual provides detailed instructions for the installation, operation, and maintenance of your dash cam.

Key Features:

  • 4K+1080P Dual Recording: Capture every detail in stunning 4K resolution for the front camera and 1080P for the rear camera.
  • STARVIS 2 Sensor: Enhanced low-light performance for clear recordings in various conditions.
  • Smart Interaction Touch & Talk: Effortlessly control with touchscreen and voice commands.
  • Built-in 5.8GHz WiFi & GPS Tracking: Faster video downloads and accurate route/speed tracking.
  • All-Day Car Protection: Includes G-Sensor for automatic crash recording, Loop-Recording for continuous coverage, and Time-Lapse for efficient parking monitoring.
  • Enhanced Clarity WDR: Wide Dynamic Range for improved video quality in scenes with high brightness variations.

Product Overview Video

Video: Unboxing and overview of the REDTIGER F7N ELITE Dash Cam.

2. Package Contents

Please check the box for the following items:

  • F7N Elite 4K Dash Cam
  • 1080P Rear Camera
  • GPS Mount
  • Adhesive Slipcover
  • Power Supply Cable with Car Charger
  • Electrostatic Sticker
  • Cable Clips (5 pieces)
  • Adhesive
  • User Manual
  • Car wire trim tool
  • 64GB TF card
Package contents of REDTIGER F7N ELITE Dash Cam

Image: All components included in the REDTIGER F7N ELITE Dash Cam package.

3. Product Appearance

Familiarize yourself with the different parts and controls of your REDTIGER F7N ELITE Dash Cam.

Front view of REDTIGER F7N ELITE Dash Cam with labeled components

Image: Front view of the dash cam with its main features.

  1. Adhesive: For mounting the dash cam.
  2. USB-C Port: For power input.
  3. Rear Cam Slot: Connects the rear camera.
  4. Front Camera Lens: Captures forward-facing video.
  5. Power Button: Controls power and screen switching.
  6. Memory Card Slot: Insert your MicroSD card here.
  7. Status Light: Blue indicates power on, red flashing indicates recording.
  8. Up Button: Navigation and function control.
  9. Mode Button: Accesses menus and confirms selections.
  10. Down Button: Navigation and function control.
  11. GPS Mount: Attaches the dash cam to the vehicle and provides GPS functionality.
  12. Screen: Displays live view, menus, and playback.
  13. Reset Button: For resetting the device.

4. Buttons and Functions

The dash cam features several buttons for easy operation:

Power Button

  • Recording Mode: Short press to switch screen; Long press to turn off the camera.
  • Setup Mode: Short press to return to the previous screen.
  • Playback Mode: Short press to return to the previous screen.

Menu Button (M)

  • Recording Mode: Short press to enter main menu.
  • Setup Mode: Short press to enter/confirm specific settings.
  • Playback Mode: Short press to select and play the specific file; Long press to delete/lock/unlock the specific file.

Up Button (▲)

  • Recording Mode: Short press to lock the recording file; Long press to turn on or off Wi-Fi.
  • Setup Mode: Short press to select the previous function.
  • Playback Mode: Short press to select the previous file; Short press to fast rewind while video is being played.

Down Button (▼)

  • Recording Mode: Short press to take a snapshot; Long press to stop recording.
  • Setup Mode: Short press to select the next function.
  • Playback Mode: Short press to select the next file; Short press to fast forward while video is being played.

5. User Interface Overview

The dash cam's screen displays various icons and information during recording and in menu modes.

Recording Mode Icons:

IconDescription
📍GPS status
4KRecording resolution
ⓅWhether to connect the hardwired kit and set up parking monitoring
🎤Voice control status
📶Wi-Fi status
🔊Camera system sound status
🎤Voice recording status
🚗Indicates the current video perspective displayed on the screen
• 03:22Recording status and recording time
• 03:22Emergency recording is on
07:20 PMDate and time of the camera
🔒Emergency Video Lock
🔍Enter the menu
📷Photograph function
•Power Indicator
•Red LED blinking: Recording Video; No Red LED: Not Recording Video

6. Function Overview (Settings Menu)

Short press the 'M' button to enter the settings menu, where you can adjust various functions and parameters of the entire machine.

IconFunctionOption/Description
📺ResolutionFront 4K@30fps / Front 2.5K@60fps / Front 1080P@120fps / Front 4K@25fps+Rear 1080P@25fps / Front 2.5K@30fps+Rear 1080P@30fps
🎤AudioON/OFF
🔄Recording duration1/3/5mins
📈G-sensorOff/Low/Medium/High
🛂Fatigue reminderA Reminder Will be Made During 1h/2h/3h/4h/OFF
📶Wi-FiOFF/2.4GHz/5.8GHz
🔊VolumeOff/Low/Medium/High
🔈Click ToneON/OFF
⏰Screen SaverOFF/10s/30s/2mins, Screen goes off after the set time
🎤Voice controlON/OFF/Voice Command
🖼Mirror FlipHorizontal Flip Your Rear View (Requires rear camera connection)
🚗Rear Cam FlipVertical Flip Your Rear View (Requires rear camera connection)
ⓅParking MonitorPlease connect the ACC hardwire kit
📍GPSDisplay GPS signal strength
⏱TimeWatermarkON/OFF
📈Speed StampON/OFF
📍GPS StampON/OFF
⏱Speed UnitsKM/H / MPH
🌍LanguageChoose Your Preferred Language
⏱Clock SettingsUpdate With GPS
🕛Time Format12h/24h
🌍Time ZoneChoose Your Time Zone
⏱DSTDaylight Saving Time ON/OFF
🎛Flicker60Hz/50Hz
📄Format ReminderReminder to Clear Data
📄FormatFormat SD card. All data will be deleted
📈Card SpeedCard Speed Detection
🔄Default SettingReset All Settings
📥APPA QR Code for Redtiger app
ℹ️VersionSoftware Version
🎧Help CenterScan the QR code to contact us

7. Voice Control Function

The F7N ELITE supports voice commands for hands-free operation. This feature is available in English only.

Enabling Voice Control:

  1. Tap on the voice control icon on the screen to turn the feature on or off.
  2. Alternatively, navigate to the settings menu, select 'Voice Control', and toggle it ON/OFF.

Available Voice Commands:

CommandFunction
"Lock the video"Locks the current recording to prevent overwriting.
"Take picture"Captures a still image.
"Turn on Audio"Enables audio recording.
"Turn off Audio"Disables audio recording.
"Turn on screen"Turns on the display screen.
"Turn off screen"Turns off the display screen.
"Turn on wifi"Activates Wi-Fi.
"Turn off wifi"Deactivates Wi-Fi.
"Turn on recording"Starts video recording.
"Turn off recording"Stops video recording.
"Show front camera"Switches the display to the front camera view.
"Show rear camera"Switches the display to the rear camera view.

8. OTA (Over the Air) Update

To ensure optimal performance and access to the latest features, keep your dash cam's firmware updated via the REDTIGER APP.

Update Procedure:

  1. Ensure you have the latest version of the REDTIGER APP installed on your mobile device.
  2. Disconnect your mobile phone from the dash cam's Wi-Fi.
  3. Connect your phone to a local area network (LAN) for 5 seconds, then disconnect.
  4. Reconnect your phone to the dash cam's Wi-Fi.
  5. Once the Wi-Fi connection is successful, open the REDTIGER APP. If new software is detected, the APP page will indicate an available update.
  6. To initiate the upgrade, tap on "Upgrade Now" within the APP. The APP will prompt you to download the upgrade package.
  7. Connect the dash cam to send the upgrade package. Do not power off the dash cam during this process.
  8. Once the upgrade is complete, the APP will display a success message, and the dash cam will automatically restart.

9. How to Play Video on Computer

For viewing and analyzing your dash cam footage, we recommend using the official REDTIGER Player software. This player allows you to view videos, track GPS data, and utilize other functions.

Downloading the REDTIGER Player:

You can download the REDTIGER Player for free on Mac or Windows from the following link: https://www.redtigercam.com/pages/gps-player

Player Features:

The REDTIGER Player offers various playback modes and features:

  • Split Screen View: If front and rear camera videos are recorded synchronously and loaded together, they can be played separately in split left and right screens.
  • Map and Track Display: View your driving route and location on a map.
  • Speed and Driving State Indication: Displays speed and other relevant driving data.
  • Play Control Panel: Standard video playback controls.
  • Playlist: Manage and select your recorded video files.
Screenshot of REDTIGER Player software showing video playback and GPS map

Image: Screenshot of the REDTIGER Player interface, demonstrating dual video playback with GPS tracking.

To play a specific video file, drag the desired file from the playlist to the video play window.

10. Installation

WARNING: Please ensure all cameras and wires are connected before powering on the dash cam screen. Improper connection may prevent the camera from functioning correctly.

10.1. Insert Memory Card

Insert the MicroSD card into the dash cam with the gold contacts facing towards the screen. Push the card until it clicks into place.

Inserting MicroSD card into dash cam

Image: Proper insertion of the MicroSD card into the dash cam.

10.2. Front Camera Installation

Peel off the electrostatic sticker and apply it to your desired location on the windshield. Attach the front camera to the electrostatic sticker and press firmly to secure it.

Applying electrostatic sticker and mounting front dash cam

Image: Steps for mounting the front dash cam using the electrostatic sticker.

10.3. Mount the Rear Camera

  1. Open the trunk of your vehicle, remove any necessary screws, and carefully remove the plastic panel.
  2. Pry open the license plate light and pass the rear camera cable through the hole where the license plate light is located.

Note: This rear camera is designed for external installation and is better suited for mounting on the outside of the vehicle, typically above the license plate frame, due to its lens parameters being optimized for outdoor conditions.

Rear camera cable routing through license plate light opening

Image: Diagram showing how to route the rear camera cable through the license plate light opening.

10.4. Wire Layout in the Vehicle

  1. Connect the car charger to the cigar socket.
  2. Connect the other end of the car charger to the dash cam's USB-C port.
  3. Use the provided car trim tool (crowbar) to run the power cable along the front windshield and the roof, hiding it down the A-pillar. Ensure the cable does not obstruct the driver's view or pose a safety hazard.
  4. Routing power cable along A-pillar

    Image: Diagram illustrating how to route the power cable along the A-pillar.

  5. Connect the rear camera cable to the 'REAR' port on the dash cam.
  6. Hide the rear camera cable along the gaps between the front windshield and the ceiling, between the car body and the ceiling on the passenger side, and between the rear seats and the ceiling.
  7. Routing rear camera cable along vehicle interior

    Image: Diagram showing the recommended routing for the rear camera cable within the vehicle's interior.

11. Specifications

AttributeSpecification
Item TypeCar DVR
Assembly ModePortable Recorder
Chipset ManufacturerHISILICON
Frames Per Second25
Camera Resolution3840x2160 (4K)
Number Of Lenses2
View angle170°
Video CodeH.264
Video FormatMP4
Screen Ratio4:3
Display Size3"-5" (3.18" IPS Screen)
DisplayLCD
Touch ScreenYes
Built-in ScreenYes
Imaging SensorSONY IMX415
Pixels500Mega
Rear CameraNONE (refers to internal, external 1080P is included)
Max External Memory256G
Memory Card Required Reading SpeedClass 10
GPS loggerInternal
BatteryBuilt-in (Super capacitor)
Power SourceCorded electric
Input/OutputType C
Loop-Cycle Recording FeatureYes
Audio RecordedYes
NightShot FunctionYes
Special FeaturesG-Sensor, Digital zoom, SD/MMC card, Waterproof, Real Time Surveillance, WiFi function, Parking Monitor, Speed and Coordinates Recording, External GPS
APP CompatibilityAndroid/IOS
Working Temperature-20°C to 70°C (-4°F to 158°F)
Dimensions (W x H x D)4.39 x 5.8 x 3.8 inches
Weight700g
OSD LanguageChinese (Simplified), English, French, German, Japanese, Korean
Warranty1 year (18 months free replacement and lifetime technical support)

12. Troubleshooting

If you encounter any issues with your dash cam, refer to the solutions below:

12.1. No GPS Signal

  1. Clean and reconnect the probe on the main unit and bracket. Check for any interference in your car (e.g., metal film on windshield, radio antenna, radar detector).
  2. Move your car to an open area. Observe if the GPS icon on the screen turns green and displays GPS info.
  3. Once GPS locks onto a signal, a satellite icon will appear at the bottom left of the screen. Green indicates positioning, while white indicates no positioning.

12.2. How to Turn Off On/Off Music of Dash Cam

Go to Settings > Click Tone > Off. When the click tone is turned off, the power on and off music will also be turned off.

12.3. Dash Cam Prompts "Card Error" or "Please Format Memory Card"

  1. Go to Settings > Format Reminder to check if the regular format reminder is enabled.
  2. Format the Memory Card.
  3. Restore factory settings and restart the dash cam.
  4. Update the firmware.

12.4. Dash Cam Repeated Restart/No Boot

  1. Ensure you are using the original car charger.
  2. Unplug the Memory Card, rear camera cable, and car charger in turn, and reinstall them. Check whether a short circuit is caused by accessories.
  3. Reset the machine through the small hole at the bottom of the driving recorder.
  4. If none of the above solves the problem, try to power on the USB cable to confirm whether the host can be used normally.
  5. Visit the official website to update the firmware.
  6. If the issue persists, contact customer service for a replacement.

12.5. "Mass Storage" Appears on the Screen

This occurs when you use a USB cable with data transfer mode, causing the dash cam to enter transfer mode. In this mode, only data transfer is possible, and other functions are disabled. For best results, use the original car charger or a USB cable without data transfer mode.

12.6. Cannot Connect to Wi-Fi

  1. Check the working distance of Wi-Fi, about 15ft.
  2. Check the SSID and password of the Wi-Fi, or if there are other devices connected to the Wi-Fi.
  3. Turn off mobile data, security software, and VPN on your phone.
  4. If the issue persists, contact customer support for assistance.

12.7. Incorrect Time Setting

The dash cam features built-in GPS, which automatically adjusts the time based on your location and time zone. You can adjust the time through Settings > Time Zone/DST.

13. User Tips

  • Wiring: The provided wiring length is generally sufficient for most car sizes, and all necessary installation items are included.
  • Rear Camera Placement: While designed for external mounting, the rear camera can also be mounted inside the car if preferred.
  • Image Quality Expectations: The camera provides clear videos, but for specific details like license plate numbers, clarity might vary depending on conditions. Manage expectations regarding 4K resolution, as perceived sharpness can differ.
  • Operating Temperature: It is normal for the camera to get warm during use.
  • Hardwire Kit (HW KIT): The HW KIT is an accessory that converts 12V car battery voltage to 5V, enabling the 24-hour parking monitoring function. Ensure you select the correct model (with or without HW KIT) when purchasing if this feature is desired.
  • Storage: The device records to an SD card only; there is no internal eMMC memory.
  • Maintenance: To ensure a clean, smooth, and comfortable user experience, it is recommended to format your Memory Card once a month.

14. Warranty and Support

Warranty Information:

REDTIGER provides an 18-month free replacement warranty and lifetime technical support for the F7N ELITE Dash Cam. The specific warranty period may be subject to local laws.

Extended Warranty Service:

You can obtain an additional 6 months of extended warranty service by registering your device on the official REDTIGER website:

https://www.redtigercam.com/pages/warranty-form

Customer Service Center:

If you have any problems with the function or installation, please feel free to reach out to us:

  • After-sales Email: help@redtigercam.com
  • Business Cooperation Email: contact@redtigercam.com
  • Customer Phone Service (US): +1 888 966 8028

You can also scan the QR codes below for quick access to the Help Center or WhatsApp support:

QR code for Help Center

Help Center QR Code

QR code for WhatsApp support

WhatsApp Support QR Code

Note: The QR codes provided in the source data were identical and linked to a PDF. For demonstration, I've used the same PDF link for both, but in a real scenario, these would be distinct links to the respective services.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.