1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NINIVISION 10CH NVR Recorder 4K 8MP HD CCTV Video Surveillance POE Camera System. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Figure 1: NINIVISION 10CH NVR Recorder with 10 8MP POE Cameras
Key Features:
- Ultra HD 4K High Definition Display
- Advanced H.265 Video Compression
- POE (Power Over Ethernet) for simplified installation
- Two-Way Audio with built-in microphone and speaker in cameras
- Ultra HD Full Color Day/Night Vision
- Motion Detection and Email Alerts
- Face Detection and Smart Playback
- IP66 Weatherproof cameras for outdoor/indoor use
- Remote Access via Android, iPhone, iPad, PC, VMS
2. Package Contents
Verify that all items listed below are included in your package:
- 1 × 10CH 4K POE NVR Network Video Recorder
- 2/4/6/8/10 × 8MP HD POE Cameras (quantity depends on selected kit)
- 1 × Power Supply for NVR
- 1 × USB Mouse for NVR
- 1 × Remote Control for NVR
- Hard Disk (Optional, depending on purchase)

Figure 2: Included Components
3. Setup Guide
3.1 POE Connection (Plug and Play)
The system utilizes Power Over Ethernet (POE) technology, simplifying installation. No extra power cables or adapters are needed for the cameras. Simply connect each IP camera to the NVR using a single Ethernet cable.

Figure 3: 8CH POE NVR Connection Diagram
For 4-channel and 16-channel NVRs, the connection principle is similar, adapting to the number of camera ports available on the NVR. Ensure your WiFi router is connected to the NVR's LAN port for remote access capabilities.

Figure 4: 4CH and 16CH POE NVR Connection Diagrams
3.2 Hard Drive Installation (If applicable)
If your system did not come with a pre-installed hard drive, you will need to install one for recording. The NVR supports up to an 8TB HDD (3.5" inch SATA Port). Power off the NVR before installing or removing the hard drive. Refer to the NVR's internal diagram for hard drive bay location and connection.
3.3 Initial Power-On
- Connect the NVR to a power outlet using the provided power supply.
- Connect the NVR to a monitor (TV or PC) using an HDMI or VGA cable.
- Connect the USB mouse to the NVR.
- Power on the NVR. Follow the on-screen instructions for initial setup, including setting up a password and network configuration.
4. Operating Instructions
4.1 Remote Viewing (Mobile App)
Access your security system from anywhere using the dedicated mobile application. The system supports P2P technology for easy plug-and-play installation without complex port forwarding.
- Scan the QR code (provided in the image below) to download the app for Android or iOS.
- Open the app, register a user name, and log in.
- Click "+" to add devices.
- Connect successfully and start to preview live video.

Figure 5: Easy Mobile View Setting

Figure 6: Remote Access Capabilities
4.2 Two-Way Audio
Each camera is equipped with a built-in microphone and speaker, enabling real-time two-way audio communication. You can talk to individuals near the camera via your smartphone remotely.

Figure 7: Two-Way Audio in Action
Video 1: Product Features Overview (includes two-way audio demonstration)
4.3 Full Color Day/Night Vision
The cameras feature smart IR-Cut filters that automatically switch between day and night modes. This ensures clear, vivid surveillance footage in full color during the day and enhanced brightness at night, reducing color cast.

Figure 8: Full Color Day/Night Vision Capability
4.4 Motion Detection & Email Alerts
Configure specific areas for motion detection. When motion is triggered, the system will send an email alert to your registered address, providing immediate notification of events.

Figure 9: Motion Detection and Email Alert System
4.5 Face Detection & Smart Playback
The NVR supports advanced AI Human Face Detection and Face Smart Playback. This allows for efficient searching of video footage by identifying faces, significantly reducing playback time by skipping unimportant segments.

Figure 10: Face Detection and Smart Playback
5. Maintenance
5.1 Camera Care
The cameras are IP66 weatherproof, suitable for outdoor and indoor use, offering resistance to various weather conditions. Regularly inspect camera lenses for dirt or obstructions and clean them gently with a soft cloth to maintain optimal image clarity. Ensure all cable connections are secure and free from damage.

Figure 11: IP66 Weatherproof Camera
5.2 NVR Maintenance
- Keep the NVR in a well-ventilated area to prevent overheating.
- Ensure the NVR is free from dust and debris.
- Periodically check hard drive health through the NVR's system settings.
- Regularly back up important footage to an external storage device.
5.3 Software Updates
Check the manufacturer's website or the mobile application for available firmware updates for the NVR and cameras. Keeping your system updated ensures optimal performance and security.
6. Troubleshooting
- No Video Display: Check all HDMI/VGA connections to the monitor. Ensure the NVR is powered on.
- Cameras Not Recording: Verify that a hard drive is installed and properly formatted. Check recording schedules in the NVR settings.
- No Remote Access: Ensure the NVR is connected to the internet via the WiFi router. Check network settings on the NVR and your mobile device. Confirm the P2P status is online.
- Poor Image Quality: Clean camera lenses. Ensure cameras are within optimal range for POE transmission (up to 150M-200M). Check resolution settings on the NVR.
- Motion Detection Not Triggering: Review motion detection area settings and sensitivity in the NVR configuration. Ensure email alert settings are correct.
- No Two-Way Audio: Check microphone and speaker settings in the NVR and mobile app. Ensure volume levels are adequate.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NINIVISION |
| Model Number | NINI-JVU2804-4K |
| Video Input | 8 Channel |
| Resolution | 8MP |
| TV System | NTSC, PAL |
| PCS of Camera | 2PCS, 4PCS, 6pcs, 8PCS (up to 10CH NVR) |
| Certification | CE, FCC, RoHS |
| Video Compression Format | H.265 |
| NVR Resolution | H.265 4K POE NVR |
| Camera Resolution | H.265 4K POE IP Camera |
| Video Output | 10CH POE input / 1CH VGA, 1CH HDMI output |
| Audio Output | 1CH audio output (RCA) |
| Two-Way Audio | Support |
| Waterproof | Support (IP66) |
| NVR Features | Motion detection, Face Detection, Email Alert |
| Camera Features | POE, Color Day/Night Vision, IR-cut |
| Camera Support | Full color Day night Vision |
| Language | Multi language (English, Spanish, Russian etc.) |
| Hard Drive Port | 1*SATA Port (support up to 8TB HDD) |
| Hard Drive Size | 3.5" inch |
| Remote View | Android, iPhone, iPad, PC, VMS etc |
| Application | Home, store, shop, office, park, Supermarket etc |
| Country of origin | China.Shenzhen |
| Warranty | 3 years |

Figure 12: H.265 Video Compression Efficiency

Figure 13: 8MP HD Display Quality
8. Warranty and Support
8.1 Warranty Information
This product is warranted against defects in workmanship and material for a period of 3 years from its original purchase date. Any unit proving defective during this period will be repaired without charge for parts or replaced. The end user is responsible for all freight charges incurred to send products to the repair center. The warranty does not cover incidental, accidental, or consequential damages arising from use. Any costs associated with fitting or removal by a tradesman or other person, or any other costs associated with its use, are the responsibility of the end user. This warranty applies only to the original purchaser and is not transferable.
8.2 Returns
Items can be returned for refund or replacement within 30 days from the date of receipt. Returned merchandise must be unused, in original packaging, and include all accessories. Original shipping costs are not refundable. Please contact customer support for a Return Merchandise Authorization (RMA) before returning any items. Products returned without an RMA will be void and sent back to the buyer at their expense. The customer is responsible for all charges of returning and reshipping. Providing a return tracking number will assist in this process.
8.3 Technical Support
For any product or service issues, please feel free to contact our technical support team. Our team will assist with troubleshooting and repaired products upon receipt of your return parcel.
9. User Tips
- For optimal performance, ensure your NVR is connected to a stable internet connection, especially for remote viewing features.
- When setting up motion detection, consider adjusting sensitivity levels to minimize false alarms from environmental factors like moving branches or shadows.
- Utilize the H.265 video compression to maximize storage efficiency on your hard drive, allowing for longer recording periods.
- Regularly check the mobile app for notifications and system status to stay informed about your security.