HORACO SWTGW2C80N

Contents

HORACO 10Gb 8 Port Web Managed Ethernet Switch

Model: SWTGW2C80N | Brand: HORACO

1. Introduction

The HORACO SWTGW2C80N is an 8-port 10 Gigabit Ethernet Web Managed Switch designed for high-speed network transmission. It offers advanced network management functions such as LACP, VLAN, QoS, SNMP, IGMP, and Port Mirroring, making it suitable for homelab environments, small to medium-sized businesses, and other applications requiring robust and flexible networking solutions. This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new switch.

Front view of the HORACO 10Gb 8 Port Web Managed Ethernet Switch
Figure 1: HORACO 10Gb 8 Port Web Managed Ethernet Switch (Front View)

2. Safety Information

Please read all safety instructions carefully before using this device. Keep this manual for future reference.

  • Ensure the power supply voltage matches the requirements specified on the device label.
  • Do not open the device casing. There are no user-serviceable parts inside.
  • Keep the device away from water, fire, and high humidity environments.
  • Ensure proper ventilation to prevent overheating. Do not block cooling vents.
  • This device is equipped with 4KV lightning protection. However, avoid installing or using during thunderstorms.

3. Package Contents

Verify that your package contains the following items:

  • 1 x HORACO 10Gb 8 Port Web Managed Ethernet Switch
  • 1 x User Manual
  • 1 x Certificate of Conformity
  • 1 x Power Supply (AC 100-240V, 50/60Hz, DC 12V 8A)
  • 1 pair x Hanging Ears (for rack mounting)

4. Product Overview

4.1 Front Panel

The front panel features eight 10G RJ45 ports, LED indicators for power and port status, and a reset button.

Front view of the switch with dimensions
Figure 2: Switch Front Panel and Dimensions (320mm x 207mm x 45mm)

4.2 Side Panels

The side panels are designed for efficient heat dissipation, featuring cooling vents and a cooling fan to ensure stable operation within the specified temperature range.

Diagram showing cooling vents and fan on the switch sides
Figure 3: Highly Efficient Heat Dissipation Design

5. Setup

5.1 Physical Installation

The switch can be installed on a desktop or mounted in a 1U rack using the provided hanging ears.

  • Desktop Placement: Place the switch on a stable, flat surface with adequate space around it for ventilation.
  • Rack Mount Installation: Attach the hanging ears to the sides of the switch using the provided screws. Then, secure the switch into a standard 19-inch rack.
Image showing the switch installed in a 1U rack
Figure 4: 1U Rack Mount Installation

5.2 Power Connection

Connect the appropriate power cord to the switch's power input and then to a standard AC power outlet (100-240V, 50/60Hz).

Various power plug types: US, EU, UK, AU
Figure 5: Adaptable Power Cord Specifications

5.3 Network Connection

Connect your network devices (servers, workstations, other switches) to the RJ45 ports on the front panel using appropriate Ethernet cables:

  • For 100Base-TX and 1000Base-TX connections: Use Cat5 or above UTP cables (up to 100m).
  • For 10000Base-TX (10Gbps) connections: Use Cat6 or above UTP cables (up to 100m).
Diagram illustrating 10G high-speed transmission
Figure 6: 10G High Speed Transmission Capability

6. Operating the Switch

6.1 Basic Operation (Plug and Play)

For basic network connectivity, the switch operates as a plug-and-play device. Simply connect your devices, and they will automatically establish network communication at the highest supported speed.

6.2 Web Management Interface

The HORACO SWTGW2C80N supports web-based management for comprehensive configuration, monitoring, and troubleshooting. To access the web interface:

  1. Ensure your computer is connected to the switch.
  2. Open a web browser (e.g., Chrome, Firefox).
  3. Enter the default IP address of the switch (refer to the product label or documentation for the default IP, typically 192.168.1.1 or similar) in the address bar and press Enter.
  4. Enter the default username and password (refer to the product label or documentation) to log in.
  5. You can now configure advanced features and monitor the switch's status.
Screenshots of the web management interface for the switch
Figure 7: Web Management Interface Overview

6.3 Advanced Network Management Functions

The switch supports various management functions to optimize your network:

  • LACP (Link Aggregation Control Protocol): Combine multiple physical links into a single logical link to increase bandwidth and provide redundancy.
  • VLAN Management: Create virtual local area networks to segment your network for improved security and performance.
  • QoS (Quality of Service) Configuration: Prioritize network traffic for critical applications (e.g., VoIP, video streaming).
  • SNMP (Simple Network Management Protocol) Configuration: Monitor network devices from a central management station.
  • IGMP (Internet Group Management Protocol) Configuration: Manage multicast traffic efficiently.
  • Port Mirroring: Copy traffic from one port to another for network analysis and troubleshooting.
Diagram illustrating Link Aggregation (LACP) setup
Figure 8: Link Aggregation (LACP) Example
Icons representing various network management functions
Figure 9: Multiple Network Management Functions

7. Maintenance

7.1 Heat Dissipation

The switch features a metal casing, cooling vents, and an internal fan for highly efficient heat dissipation. To ensure optimal performance and longevity, keep the cooling vents clear of obstructions and ensure adequate airflow around the device.

Image showing the switch's metal casing and temperature resistance
Figure 10: Metal Casing for Temperature Resistance (0°C to 40°C)

7.2 Cleaning

Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the device is powered off and unplugged before cleaning.

8. Troubleshooting

8.1 No Power

  • Check if the power cord is securely connected to the switch and the power outlet.
  • Verify that the power outlet is functional.

8.2 No Network Connectivity

  • Ensure Ethernet cables are securely connected to both the switch and the network devices.
  • Check the LED indicators on the switch ports. A solid or blinking light indicates a valid connection and activity.
  • Verify that the connected devices are powered on and configured correctly.

8.3 Cannot Access Web Management Interface

  • Ensure your computer's IP address is in the same subnet as the switch's IP address.
  • Verify the switch's IP address. If unknown, you may need to reset the switch to factory defaults.
  • Try a different web browser.

8.4 Resetting to Factory Defaults

If you encounter persistent issues or forget the login credentials, you can reset the switch to its factory default settings using the reset button on the front panel. Consult the full product documentation for the specific reset procedure (e.g., press and hold for X seconds).

9. Specifications

The following table details the technical specifications of the HORACO SWTGW2C80N switch:

Table of product parameters including port definition, power consumption, chip solution, performance, network protocol, supply voltage, working environment, and structure information.
Figure 11: Detailed Product Parameters
Technical Specifications - HORACO SWTGW2C80N
Feature Description
Brand Name HORACO
Model Number SWTGW2C80N
Switch Type Ethernet
Interface 8*10G RJ45 ports (1.25G/2.5G/10G adaptive)
Transmission Rate 10000 Mbps
Switch Capacity 160Gbps
Packet Forwarding Rate 119.04Mpps
Communication Mode Full-Duplex & Half-Duplex
Packet Buffer 12Mbit
MAC Address Table 16K
VLAN Range 1-4094, maximum active VLAN is 4K
Transmission Method Store and Forward
Power Supply AC 100-240V, 50/60Hz, DC 12V 8A
Mainboard Power Consumption 13.8W
Operating Temperature 0~40°C
Storage Temperature -40°C to 70°C
Operation Humidity 10%~90%, non-condensing
Storage Humidity 5%~95%, non-condensing
Network Media 100Base-TX: Cat5 or above UTP (≤100m)
1000Base-TX: Cat5 or above UTP (≤100m)
10000Base-TX: Cat6 or above UTP (≤100m)
Network Protocol IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3bz, IEEE802.3ae, IEEE802.3az
Net Weight 1.82 Kg
Gross Weight 2.36 Kg
Product Dimensions (L x W x H) 320mm x 207mm x 45mm
Package Dimensions (L x W x H) 370mm x 290mm x 85mm

10. User Tips

  • Fan Noise: Some users have noted that the ventilation system can be noisy. Consider placement in a server closet or a location where fan noise will not be disruptive, especially in quiet home environments.

11. Warranty & Support

HORACO provides a 1-year free warranty for this product and lifetime professional technical support. For assistance, please contact HORACO Official Store customer service.

11.1 Certifications

This product is certified with CE, FCC, and RoHS, ensuring compliance with relevant safety and environmental standards.

Images of CE, FCC, and RoHS certification documents
Figure 12: Brand Qualification and Quality Assurance Certifications

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.