NICE XBJ04

Contents

XBJ04 Diesel Common Rail Injector Measuring Tool Kit Instruction Manual

For BOSCH and DENSO Injectors

1. Introduction

The XBJ04 Diesel Common Rail Injector Measuring Tool Kit is a specialized set of instruments designed for accurately measuring critical internal parameters of BOSCH and DENSO common rail injectors. These measurements include armature lift, residual air gap, and stroke travel, which are essential for proper injector calibration and repair. This manual provides instructions for the correct use and maintenance of the tool kit.

XBJ04 Tool Kit with Digital Dial Gauge
XBJ04 Tool Kit (with digital dial gauge option)
XBJ04 Tool Kit without Digital Dial Gauge
XBJ04 Tool Kit (without digital dial gauge option)

2. Product Components

The XBJ04 kit typically includes a variety of precision measuring tools and adapters, housed in a durable storage case. Key components are:

  • Multiple measuring probes/adapters (e.g., XB01, XB02, XB03, XB04, XB05, XB06)
  • Digital dial gauge (may be included depending on the kit variant)
  • Base fixture for holding injectors during measurement
  • Storage case with custom foam inserts
Close-up of XBJ04 measuring tools
Various measuring tools included in the kit
Close-up of XB01, XB02, XB03 tools
Measuring tools XB01, XB02, XB03
Close-up of XB04, XB05, XB06 tools
Measuring tools XB04, XB05, XB06

3. Setup

  1. Unpack the XBJ04 tool kit and ensure all components are present and undamaged.
  2. Place the base fixture on a stable, clean workbench.
  3. If using a digital dial gauge, ensure it has a working battery and is properly attached to the appropriate measuring probe.
  4. Familiarize yourself with the different measuring probes (XB01-XB06) and their intended use for various injector types and measurement points.
XBJ04 kit with manual showing setup diagrams
Kit contents and manual with setup guidance

4. Operating Instructions

This section outlines the general procedure for measuring injector parameters. Specific measurements (armature lift, residual air gap, stroke travel) will utilize different probes and techniques.

4.1 General Measurement Procedure

  1. Prepare the Injector: Ensure the common rail injector is clean and free from debris. Securely mount the injector in the base fixture.
  2. Select the Correct Probe: Choose the appropriate measuring probe (e.g., XB01-XB06) for the specific measurement you intend to perform (e.g., G2 Common Rail Injector Internal Lift Parameter Determination and Measurement).
  3. Attach Dial Gauge: If not already attached, securely fasten the digital dial gauge to the selected measuring probe.
  4. Zeroing the Dial Gauge: Before taking any measurements, zero the digital dial gauge. This is crucial for accurate readings. The video demonstrates this step: "Zeroing successful."
  5. First Measurement - Injector Plane: Position the measuring probe to contact the injector's reference plane. The video shows this as "First step: measure injector plane." Record this initial reading.
  6. Second Measurement - Armature Plate: Carefully move the probe to measure the distance to the center protrusion of the armature plate. The video indicates this as "Distance to the center protrusion of the armature plate." Record this reading.
  7. Calculate the Difference: The difference between the two readings will give you the desired parameter (e.g., armature lift, residual air gap, or stroke travel).
  8. Record Data: Always record your measurements accurately. The video emphasizes "Record data." For example, readings like 3.458 or 3.457 are shown being recorded.
  9. Repeat for Accuracy: For best results, repeat the measurement process multiple times and average the readings.

4.2 Specific Measurements (Examples)

  • Needle Valve Lift: Use the designated probe to measure the needle valve's movement.
  • Residual Air Gap: Measure the gap between specific components to determine the residual air gap.
  • Stroke Travel: Determine the full travel distance of internal components.

Refer to the diagrams in the included manual for detailed visual guidance on probe placement for each specific measurement.

Video demonstrating the zeroing and initial measurement steps for an injector.

5. Maintenance

  • Cleaning: After each use, clean all tools with a soft, dry cloth. Avoid using harsh chemicals that may damage the precision surfaces or digital components.
  • Storage: Store the tool kit in its original case in a dry, dust-free environment. The foam inserts are designed to protect the tools from impact.
  • Battery Replacement: If the digital dial gauge is included and its display becomes dim or unresponsive, replace the battery according to the manufacturer's instructions for the gauge.
  • Calibration: Periodically check the accuracy of the digital dial gauge against a known standard.

6. Troubleshooting

  • Inaccurate Readings:
    • Ensure the dial gauge is properly zeroed before each measurement.
    • Check for any debris or foreign material on the measuring surfaces of the tools or the injector.
    • Verify that the injector is securely mounted and not shifting during measurement.
    • Confirm the correct measuring probe is being used for the specific parameter.
  • Digital Dial Gauge Malfunction:
    • Check battery level and replace if necessary.
    • Ensure connections between the probe and gauge are secure.
    • If issues persist, consult the dial gauge's specific manual or contact support.
  • Tool Damage:
    • Handle all precision tools with care to prevent bending or scratching.
    • Do not force tools into place; if resistance is met, re-evaluate the procedure or tool selection.

7. Specifications

AttributeDetail
Model NumberXBJ04
OriginMainland China
High-concerned chemicalNone
Package Length30 cm
Package Width20 cm
Package Height10 cm
Package Weight3.0 kg

8. User Tips

  • Users have noted the kit is well-packaged, ensuring tools arrive safely and are protected during storage.
  • The overall quality of the product has been positively reviewed, indicating reliability for its intended use.
  • Always refer to the specific injector's service manual for exact measurement specifications and tolerances.

9. Support

For technical assistance, questions regarding specific injector models, or replacement parts, please contact your supplier or the manufacturer directly. Ensure you have your product model number (XBJ04) and any relevant purchase information available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.