MOES Tuya ZigBee Smart Light Switch US Push Button Wall Switch

1. Introduction

The MOES Tuya ZigBee Smart Light Switch is a newly designed smart switch that supports the ZigBee protocol, offering various control modes. It replaces traditional switches with advanced functionalities, including multi-control association with other smart switches via the Smart Life/Tuya APP, and control over backlight status and relay. This switch is designed to be suitable for different decorative styles and provides excellent value for smart home integration.

Important Warnings

Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.

Always disconnect the power supply at the circuit breaker before installing or removing the device to avoid irreversible damage from electric current or issues like lamp flashing.

2. Package Contents

Please check the box for the following items:

• Smart Switch x1
• User Manual x1
• Screw bag x1

3. Technical Specifications

Dimensions:

Diagram showing the dimensions of the Zigbee Smart Switch: 117.8mm height, 71.8mm width, 33mm depth, 6mm front panel thickness, 67mm button area height, 70.5mm module height.

4. Installation

4.1. Important Notes Before Wiring

• Make sure that the power at the circuit breaker is OFF before wiring.
• The wire colors indicated in this manual are the usual colors and may differ in some houses.
• Ensure the wire conductors are securely fastened to each wire.
• Ensure the Wi-Fi signal is steady and normally working before wiring.
• If you don't have any wiring experience, please call a professional electrician.

4.2. Wiring Steps

1. Turn off Power: Turn off the power at the circuit breaker and use an electrical tester to confirm that the power is off before proceeding with any wiring.
2. Remove Old Switch: Carefully remove the faceplate and then the old switch from the wall box.


Image showing a hand using a tool to pry an old light switch out of the wall box.

3. Verify Power is Off: We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit. You may need to turn off more than one circuit breaker.
4. Identify Wires and Take Pictures: Identify the Line/Load wires. Note: The color of your wires may be different from the colors shown in the manual. Take pictures of your existing wiring for reference.
5. Wiring Diagram: Follow the wiring diagram below to connect the smart switch wires to the wires in the wall box with the wire conductors.


Wiring diagram showing two options: 'No Neutral Wire' and 'With Neutral Wire'. Both diagrams show connections for Ground, Neutral, Load, and Line wires to the smart switch terminals.

6. Remove Panel: Remove the front panel of the smart switch with a screwdriver before mounting. (Do not install with electricity power on).


Image showing a hand using a screwdriver to remove the faceplate of the smart switch.

7. Terminal Connections:
   • Live wire connects to the “L” terminal.
   • Neutral wire connects to the “N” terminal.
   • Lamp wire connects to the “L1, L2, L3, L4” terminals.
   • 1 Gang switch connects to the “L1” terminal.
   • 2 Gang switch connects to the “L1, L2” terminals.
   • 3 Gang switch connects to the “L1, L2, L3” terminals.
   • 4 Gang switch connects to the “L1, L2, L3, L4” terminals.
8. Mount the Switch: Put the switch into the switch box in the wall. Mount the two side screws to secure it.
9. Install Glass Panel: Install the glass panel by attaching it from the top.


Diagram illustrating the physical installation of the smart switch into a wall box, showing the wire channels and how the glass panel is attached.

10. Finish Installation: Once secured, the installation is complete.

5. MOES App Setup

5.1. Download the MOES App

Download the “MOES” App from the App Store (iOS) or Google Play (Android). You can also scan the QR code below:

MOES App QR code for download, with 'GET IT ON Google play' and 'Download on the App Store' buttons.

The MOES App offers enhanced compatibility and features compared to the Tuya Smart/Smart Life App, including Siri scene control, widgets, and customized services. While Tuya Smart/Smart Life App still works, MOES App is highly recommended.

5.2. Registration or Login

• Open the “MOES” Application.
• Tap “Register” to create an account by entering your phone number and setting a password.
• If you already have a MOES account, choose “Log in”.

5.3. How to Reset/Re-pair WiFi Device

Long press the switch for 10 seconds until the indicator on the switch flashes fast. The device will then enter network connection mode.

5.4. Connecting the App to the Device

1. Ensure the device is within the effective signal coverage of your smart ZigBee gateway for successful connection into the ZigBee gateway in the MOES App.
2. Make sure your MOES App has successfully connected to a Zigbee gateway.
3. Enter the gateway section in the app. Follow the on-screen instructions to “Add subdevice”. The connection process may take 10-120 seconds depending on your network condition. Ensure the device's LED is blinking during this process.
4. Once the device is added successfully, you can edit its name and enter the device page by clicking “Done”.
5. Click “Done” again to enter the device page and enjoy your smart home automation.

6. Multi-Control Association (for N+L wire)

Note: Please confirm you have successfully linked this switch to your MOES App before attempting multi-control association.

1. Add Additional Smart Switches: Add any other smart switches you wish to associate to the same MOES App. If you have already added them, proceed to the next step.
2. Wiring for Neutral Wire Switches: If your switch requires a neutral wire, there is no need to wire the newly added switch directly to the light. Only the Line (L) and Neutral (N) wires are required for wiring the additional switch. You can then control one light with multiple switches in the MOES App.
3. Wiring for No Neutral Wire Switches: If your switch does not require a neutral wire, you need to follow the wiring instructions to connect the Line (L) and light. At this point, you can control the lights simultaneously with multiple switches.
4. Initiate Association in App: In the app, you will see two devices. Click on the main switch (e.g., a one-gang switch) to enter its settings.
5. Select Multi-Control Association: Click the edit icon in the upper right corner and choose “Multi-Control Association”. Then click “+” to add a link.
6. Choose Switch to Associate: Select the switch you want to associate and then choose the specific switch button that you want to control the same light.
7. Verify Association: Go back to the previous page. You will see two items: your main switch and the newly associated switch. Ensure the associated switch is enabled.
8. Control Your Light: You are now able to control your light with two switches. Do not associate another button in the same switch for multi-control.
9. Add More Switches: If you want to add a third or more smart switches to control your light, repeat the steps above. The app will display all associated switches.

7. Key Features

7.1. Remote Control

Image showing a person using a smartphone to control a smart light switch, with a smart switch installed on a wall next to a bed.

Control your lights from anywhere at any time using the MOES App on your smartphone.

7.2. Customize Your Schedules

Image illustrating the Timer & Countdown feature, showing a clock and a smart switch in a room, with examples like 'Timer Auto-ON at 7:00 PM' and 'Countdown Auto-OFF after 20min'.

Set timers and countdowns to automate connected devices to follow your daily schedule and preferences. For example, set lights to turn on automatically at 7:00 PM or off after 20 minutes.

7.3. Light Mode Adjustable

Screenshot of the MOES App showing 'Light Mode' settings, allowing users to choose between 'Indicate switch location', 'Indicate switch on/off', or 'OFF'.

Choose the light mode to indicate the switch's location, its on/off status, or to turn the indicator light off completely.

7.4. Family Share

Image showing two people looking at a smartphone with the MOES App interface, highlighting the 'Share Device' option, indicating family sharing functionality.

Share control of the smart switch with family members, allowing everyone to manage the smart home together.

7.5. For Limited Space

Image showing a MOES smart switch (1-gang) installed on a wall next to a door frame, contrasting it with a larger, normal 4-gang switch, emphasizing its compact design.

The compact design occupies only a 1-gang space, allowing for more control in limited space setups.

7.6. Exhaust Fan Light Switch Combo

Image showing the MOES smart switch combined with other types of switches or wall outlets, specifically for bathroom setups, demonstrating versatility.

The switch can be combined with other types of switches or wall outlets, ideal for applications like bathroom exhaust fan and light control.

8. Voice Control Integration

Image showing the MOES smart switch with Amazon Alexa and Google Home logos, indicating compatibility for voice control.

The MOES Smart Switch is compatible with Amazon Alexa and Google Home, allowing you to control your lights using simple voice commands. For example, say "Alexa, turn on the light."

For a detailed step-by-step guide on linking your smart device for voice control, please refer to the MOES website: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker

9. User Tips

• Wiring Requirements: Always double-check your home's wiring to determine if you have a neutral wire. The switch supports both neutral and no-neutral wire configurations, but understanding your setup is crucial for correct installation. If you are unsure, consult a professional electrician.
• ZigBee Hub: Remember that a MOES ZigBee Hub is required for the smart switch to function and connect to your smart home ecosystem. Ensure it is purchased separately if you don't already own one.
• Wi-Fi Frequency: The switch operates on 2.4GHz Wi-Fi only, not 5GHz. Ensure your router is configured to support 2.4GHz for proper connection.
• Minimum Power: Ensure the connected load has a minimum power of 3W for optimal performance.

10. Troubleshooting

10.1. Device Not Connecting to App

• Ensure the smart switch is within range of your ZigBee gateway.
• Verify that your ZigBee gateway is properly connected to the MOES App.
• Check if the switch's indicator light is flashing rapidly, indicating it's in pairing mode. If not, reset the device by long-pressing the switch for 10 seconds.
• Confirm your Wi-Fi network is 2.4GHz, not 5GHz.

10.2. Lights Not Responding

• Check if the power at the circuit breaker is ON.
• Ensure all wiring connections are secure and correct according to the wiring diagrams (neutral wire vs. no neutral wire).
• Verify that the connected load meets the minimum power requirement of 3W.
• If using multi-control association, ensure all associated switches are enabled and correctly linked in the app.

10.3. Voice Control Issues

• Ensure your smart switch is successfully connected to the MOES App and the ZigBee gateway.
• Verify that your Amazon Alexa or Google Home device is properly linked to your MOES/Tuya account.
• Check your internet connection and the status of your voice assistant device.

11. Maintenance

• Cleaning: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this may damage the device or cause electrical hazards.
• Regular Checks: Periodically check the wiring connections to ensure they remain secure.
• Software Updates: Keep your MOES App updated to the latest version to ensure optimal performance and access to new features.

12. Warranty and Support

12.1. Warranty Instructions

MOES products are covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (e.g., VAT invoice, financial receipt) confirming the actual date of purchase.

If product quality problems occur within 24 months from the date of receipt, please prepare the product and packaging and contact the place or store where you purchased it for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.

We recommend properly protecting the goods when delivering them for warranty service, ideally using the original packaging with padding to ensure safe transportation. If replacement packaging is used, ensure adequate protection from damage during shipping. Consider placing a "Warning Glass" sticker on the packaging if applicable.

Warranty Exclusions:

• Reported defects will be considered immediately, no later than 14 days from delivery to the Guarantor.
• The warranty does not include maintenance and similar operations specified in the user manual, which users are obliged to do themselves.
• Defects due to natural wear and tear during use are not covered.
• Mechanical damage caused by user fault or improper use of the product.
• Damage caused by improper use of the product.
• The warranty rights expire if:
  • The warranty seal is removed from the product.
  • The serial number is removed from the product.
  • Actions are taken to eliminate physical defects outside of authorized service.
  • Non-original parts and consumables are used.

12.2. Contact Information

Manufacturer:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815

After-sale Service: service@moeshouse.com

UK Representative (UK REP):
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatost.com

EC Representative (EC REP):
AMZLAB GmbH
Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066

13. Recycling Information

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WEEE symbol indicating separate collection for electrical and electronic equipment, and a recycling symbol with text 'FR Cet appareil, ses accessoires, se recyclent À DÉPOSER EN MAGASIN EN DÉCHÈTERIE OU'.

14. FCC Compliance Statement

FCC Compliance Statement for ZS-B-US

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.