Jonsbo ZB-120/240/360

Contents

Jonsbo ZB-120/240/360 Series ARGB Case Fan Instruction Manual

Model: ZB-120/240/360 Series

Brand: Jonsbo

1. Product Overview

The Jonsbo ZB-120/240/360 series are high-performance ARGB case fans designed for desktop computer cooling. These fans feature a unique conjoined structure, an 'infinite mirror' light effect, and are available in both forward and reverse blade configurations to optimize airflow within your PC case or radiator setup. They offer synchronized custom lighting effects with compatible motherboards.

Jonsbo ZB-120/240/360 series fans showcasing different sizes and ARGB lighting
Jonsbo ZB-120/240/360 series fans, showcasing different sizes and ARGB lighting.
Example of Jonsbo ZB series fans installed in a PC case
Example of Jonsbo ZB series fans installed in a PC case, demonstrating the aesthetic and cooling setup.

2. Setup and Installation

2.1 Physical Installation

  1. Ensure your PC is powered off and unplugged from the wall outlet.
  2. Identify the desired mounting location for the fan(s) in your PC case or on your radiator. The fans feature an easy-to-install conjoined structure.
  3. Align the fan(s) with the mounting holes. Each fan requires 4 screws for secure installation.
  4. Secure the fan(s) using the provided screws. Do not overtighten.
Image showing the combined fan gate light effect and the use of 4 screws for easy installation
The combined fan gate light effect and the use of 4 screws for easy installation.

2.2 Wiring Connections

The Jonsbo ZB series fans utilize a simplified wiring system for a cleaner chassis. Each fan unit connects to your motherboard or a compatible controller via two main cables:

  • PWM 4-PIN Connector: For fan speed control. Connect this to an available 4-pin fan header on your motherboard.
  • ARGB 3-PIN (5V) Connector: For addressable RGB lighting control. Connect this to an available 3-pin 5V ARGB header on your motherboard or a dedicated ARGB controller. The male and female design allows for daisy-chaining multiple fans or other ARGB devices.
Diagram demonstrating simplified wiring with a single line connection to the motherboard for cleaner chassis management
Simplified wiring with a single line connection to the motherboard for cleaner chassis management.
Illustration of the ARGB colorful synchronous light effect, highlighting the 5V 3-pin ARGB interface for motherboard synchronization
ARGB colorful synchronous light effect, highlighting the 5V 3-pin ARGB interface for motherboard synchronization.

2.3 ARGB Lighting Synchronization

The fans support colorful synchronous light effects and can be synchronized with your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to achieve over 16 million color effects. Ensure your motherboard has a 3-pin 5V ARGB header for this functionality.

Guide to using the illusionary light effect, showing software interface for ARGB control and connection details
Guide to using the illusionary light effect, showing software interface for ARGB control and connection details.

3. Operating Instructions

Once installed and connected, the fans will operate upon system startup. Fan speed can be controlled via your motherboard's BIOS settings or dedicated fan control software, utilizing the PWM connection. ARGB lighting can be customized through your motherboard's ARGB software or a compatible external controller.

3.1 Fan Blade Orientation

The ZB series offers both forward and reverse fan blade versions to allow for optimal airflow configuration (intake or exhaust) without compromising the aesthetic 'infinite mirror' effect. Ensure you select the correct fan type for your desired airflow direction.

Visual explanation of positive light effect, showing air outlet and inlet surfaces for both standard and reverse seven-blade fan designs
Visual explanation of positive light effect, showing air outlet and inlet surfaces for both standard and reverse seven-blade fan designs.

4. Maintenance

To ensure optimal performance and longevity of your Jonsbo ZB series fans, regular maintenance is recommended:

  • Cleaning: Periodically clean the fan blades and housing to remove dust buildup. Use compressed air or a soft brush. Ensure the fan is powered off and unplugged before cleaning.
  • Inspection: Check for any obstructions or loose cables that might impede fan rotation or cause noise.
  • Operating Environment: Maintain a room temperature around 25°C for optimal fan life (rated at ≥ 20,000 hours).

5. Troubleshooting

  • Fan Not Spinning:
    • Check if the 4-pin PWM connector is securely plugged into the motherboard fan header.
    • Ensure your power supply is providing adequate power to the fan headers.
    • Verify fan settings in your motherboard's BIOS.
  • ARGB Lighting Not Working/Syncing:
    • Ensure the 3-pin 5V ARGB connector is correctly plugged into a compatible ARGB header on your motherboard or controller.
    • Verify that your motherboard's ARGB software is installed and configured correctly.
    • For ZB-360 models, ensure your motherboard or controller supports at least 68 LED beads. Some motherboards allow adjusting the number of LED beads in their software.
    • Check for any physical damage to the ARGB cable or connector.
  • Excessive Noise:
    • Ensure the fan is securely mounted with all 4 screws.
    • Check for any cables or objects obstructing the fan blades.
    • Clean any dust buildup on the fan blades.
    • Adjust fan speed settings in your motherboard's BIOS or software to a lower RPM if noise is a concern.

6. Specifications

FeatureZB-120 (Forward)ZB-120WR (Reverse)
Fan Size120(L)*120(W)*28(H) mm120(L)*120(W)*28(H) mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume20.95-65.26 CFM18.75-47.71 CFM
Wind Pressure0.45-3.20 mmH2O0.33-1.66 mmH2O
Noise Level20.3-36.6 dB(A)16.4-30.7 dB(A)
Rated Voltage (FAN)DC 12VDC 12V
Rated Voltage (LED)5V5V
Rated Current (FAN)0.20A0.10A
Rated Current (LED)0.71A0.71A
Power (FAN)2.40W1.20W
Power (LED)3.55W3.55W
Fan BearingsHydraulic BearingsHydraulic Bearings
Life Expectancy≥20000h (Room Temp: 25℃)≥20000h (Room Temp: 25℃)
InterfacePWM 4PIN, ARGB 3PINPWM 4PIN, ARGB 3PIN
LED Beads (approx.)32 around + 9 parallel axis32 around + 9 parallel axis

FeatureZB-240 (Forward)ZB-240WR (Reverse)
Fan Size242(L)*123(W)*28(H) mm242(L)*123(W)*28(H) mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume20.95-65.26 CFM18.75-47.71 CFM
Wind Pressure0.45-3.20 mmH2O0.33-1.66 mmH2O
Noise Level20.3-36.6 dB(A)16.4-30.7 dB(A)
Rated Voltage (FAN)DC 12VDC 12V
Rated Voltage (LED)5V5V
Rated Current (FAN)0.37A0.16A
Rated Current (LED)1.16A1.16A
Power (FAN)4.44W1.92W
Power (LED)5.80W5.80W
Fan BearingsHydraulic BearingsHydraulic Bearings
Life Expectancy≥20000h (Room Temp: 25℃)≥20000h (Room Temp: 25℃)
InterfacePWM 4PIN, ARGB 3PINPWM 4PIN, ARGB 3PIN
LED Beads (approx.)52 around + 18 parallel axis52 around + 18 parallel axis

FeatureZB-360 (Forward)ZB-360WR (Reverse)
Fan Size362(L)*123(W)*28(H) mm362(L)*123(W)*28(H) mm
Fan Speed700-2400 (±10%) RPM700-1800 (±10%) RPM
Air Volume20.95-65.26 CFM18.75-47.71 CFM
Wind Pressure0.45-3.20 mmH2O0.33-1.66 mmH2O
Noise Level20.3-36.6 dB(A)16.4-30.7 dB(A)
Rated Voltage (FAN)DC 12VDC 12V
Rated Voltage (LED)5V5V
Rated Current (FAN)0.55A0.35A
Rated Current (LED)1.35A1.35A
Power (FAN)6.60W4.20W
Power (LED)6.75W6.75W
Fan BearingsHydraulic BearingsHydraulic Bearings
Life Expectancy≥20000h (Room Temp: 25℃)≥20000h (Room Temp: 25℃)
InterfacePWM 4PIN, ARGB 3PINPWM 4PIN, ARGB 3PIN
LED Beads (approx.)68 (estimated)68 (estimated)
Table of specification parameters for ZB-120 and ZB-240 models
Specification parameters for ZB-120 and ZB-240 models.
Table of specification parameters for ZB-360 model
Specification parameters for ZB-360 model.

7. Warranty and Support

Jonsbo ZB series fans come with a 1-year warranty from the date of purchase. If you encounter any problems with your product, please feel free to contact our customer support. All inquiries will be answered within 24 hours.

8. User Tips

  • ARGB Controller Compatibility: For optimal ARGB control, any decent ARGB controller should work. 'Nollie' is a recommended option by some users.
  • ZB-360 LED Bead Requirement: Be aware that the ZB-360 fan requires your motherboard or ARGB controller to support at least 68 LED beads for full lighting functionality. Some motherboards allow you to adjust the number of LED beads in their software.
  • Forward vs. Reverse Blades: Pay attention to the fan blade orientation (Forward or Reverse) when purchasing to ensure proper airflow direction for your specific cooling needs (e.g., intake for front/bottom, exhaust for rear/top).
  • Cable Management: Utilize the simplified wiring and daisy-chaining capabilities to maintain a clean and organized PC build.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.