1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the SUMRY Hybrid Solar Inverter. This multi-function inverter/charger combines the capabilities of an inverter, MPPT solar charger, and battery charger to deliver reliable, uninterruptible pure sine wave power for home use. It is designed to convert DC power from solar panels and batteries into AC power for household appliances.
Key features include a maximum charge current of 60A/80A, maximum PV array power of 3KW/6KW, MPPT operating voltage range of 55-450VDC, and 50Hz/60Hz frequency range. The inverter supports 12V, 24V, and 48V battery systems and works with both Lithium and Lead-acid batteries. Optional Wi-Fi monitoring is available.

2. Safety Information
Please read all instructions and warnings carefully before installing, operating, or servicing this inverter. Failure to follow these instructions may result in electric shock, fire, or severe injury.
- Ensure all wiring is performed by qualified personnel.
- Do not disassemble the inverter. There are no user-serviceable parts inside.
- Keep the inverter away from flammable materials, moisture, and direct sunlight.
- Ensure proper ventilation to prevent overheating.
- Verify that the battery voltage and PV input voltage are within the specified ranges for your model.
- Always disconnect all power sources (PV, AC, Battery) before performing any maintenance or wiring.

The inverter is equipped with multiple protection features including Overload Protection, Overheating Protection, High/Low Voltage Protection, Battery Protection, Short Circuit Protection, Overcurrent Protection, Anti-Reverse Protection, and Power Failure Protection.
3. Product Overview
The SUMRY Hybrid Solar Inverter is a compact and efficient unit designed for various power needs. It features an intuitive LCD display and multiple connection ports.
3.1. Components and Indicators

- LCD display
- Status indicator
- Charging indicator
- Fault indicator
- Function buttons (ESC, UP, DOWN, ENTER)
- Power on/off switch
- AC input
- AC output
- PV input
- Battery input
- RS-232 communication port
- Safety (Earth) ground
- Circuit breaker
3.2. Optional Wi-Fi Monitoring
The inverter supports optional Wi-Fi monitoring, allowing you to monitor and control the unit via a mobile application (SmartESS) on iOS and Android devices. The necessary Wi-Fi module connects via the RS-232 port.

4. Specifications
The following table details the specifications for various SUMRY Hybrid Solar Inverter models:

| Parameter | SP-2200 | SP-3200 | SP-4200 | SP-7000 |
|---|---|---|---|---|
| Rated Power | 2200VA/1800W | 3200VA/3000W | 4200VA/3800W | 7000VA/6200W |
| MAX.PV Array Power | 2000W | 3000W | 6000W | 6000W |
| Surge Power | 4400VA | 6400VA | 8000VA | 14000VA |
| MAX.Charging Current | 80A | 80A | 110A | 110A |
| Battery Voltage | 12V | 24V | 24V | 48V |
| MPPT Range@Operating Voltage | 55-450VDC | 55-450VDC | 55-450VDC | 55-450VDC |
| MAX. Efficiency | 98% | 98% | 98% | 98% |
| Dimension D*W*H(mm) | 405*286*98mm | 405*286*98mm | 423*290*100mm | 423*310*106mm |
| Net Weight (kgs) | 4.5kg | 5.0kg | 7.0kg | 8.0kg |
Notes:
- Ensure the power rating is higher than the appliance you want to apply. You should purchase a larger model (at least 10% to 20% more than the maximum load).
- If you want to run more than one appliance at the same time, you should refer to the total wattage.
- To run inductive loads for a long time, you should buy a pure sine wave inverter.
5. Setup
5.1. Mounting the Unit
Consider the following points before selecting where to install the inverter:
- Do not mount the inverter on flammable construction materials.
- Mount on a solid surface.
- Install this inverter at eye level in order to allow the LCD display to be read at all times.
- For proper air circulation to dissipate heat, allow a clearance of approximately 20 cm to the side and approximately 50 cm above and below the unit.
- The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
- The recommended installation position is to be adhered to the wall vertically.
- Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient heat dissipation and to have enough space for removing wires.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.

5.2. Battery Connection
Connect all battery packs according to the diagram below. Ensure correct polarity. The 1.8KW and 3KW models support 12VDC and 24VDC systems respectively. For 24V systems, two 12V batteries are typically connected in series.

5.3. System Diagram
The inverter can operate in various configurations, either with or without grid power and solar power availability. The diagram below illustrates typical setups.

6. Operating
6.1. LCD Function Description
The LCD provides real-time information about the inverter's status and operation. Refer to the diagram below for a detailed breakdown of the display elements.

- PV input
- AC input
- Input voltage, input frequency, PV voltage, battery voltage, charger current
- Setting programs
- Flashing with warning code
- Output voltage, output frequency, load percent, load in VA, load in watt and discharging current
- Load level
- DC/AC inverter circuit is working
- Battery level
- Utility charger circuit is working
- Unit connects to the PV panel
- Unit connects to the mains
- Load is supplied by utility power
- Unit alarm is disabled
- Overload
6.2. LED Indicators and Function Keys
The inverter features LED indicators for quick status checks and function keys for navigation and settings adjustments.

| LED Indicator | Color | Messages |
|---|---|---|
| AC / INV | Green | Solid On: Output is powered by utility in Line mode. Flashing: Output is powered by battery or PV in battery mode. |
| CHG | Green | Solid On: Battery is fully charged. Flashing: Battery is charging. |
| FAULT | Red | Solid On: Fault occurs in the inverter. Flashing: Warning condition occurs in the inverter. |
| Function Key | Description |
|---|---|
| ESC | To exit setting mode |
| UP | To go to previous selection |
| DOWN | To go to next selection |
| ENTER | To confirm the selection in setting mode or enter setting mode |
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your SUMRY Hybrid Solar Inverter.
- Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
- Connections: Regularly check all electrical connections (PV, battery, AC) to ensure they are tight and free from corrosion.
- Environment: Ensure the installation environment maintains the recommended ambient temperature (0°C to 55°C) and humidity levels.
- Firmware: If applicable, check for firmware updates via the SmartESS app or manufacturer's website to ensure the inverter operates with the latest features and bug fixes.

8. Troubleshooting
If you encounter issues with your inverter, refer to the following basic troubleshooting steps:
- No Power/Display: Check all power connections (battery, AC input). Ensure the power on/off switch is in the 'ON' position.
- Fault Indicator (Red Solid On/Flashing): Refer to the LCD display for specific fault codes. Consult the full product manual (if available) or contact support with the fault code.
- No AC Output: Check the AC output circuit breaker. Verify that the battery voltage is sufficient and that the inverter is not in a fault state.
- Battery Not Charging: Check PV input connections and voltage. Ensure the CHG LED is flashing (charging) or solid green (fully charged).
- Overload Warning: Reduce the connected load. The inverter will automatically attempt to restart after an overload event. Ensure your total load does not exceed the inverter's rated power.
9. User Tips
- Sizing Your Inverter: Always ensure the inverter's power rating is higher than the total wattage of the appliances you intend to power. For multiple appliances, sum their wattages and add a 10-20% buffer.
- Inductive Loads: For appliances with motors (e.g., refrigerators, pumps), which are inductive loads, a pure sine wave inverter like this one is essential for long-term, reliable operation.
- Voltage Compatibility: Before connecting any appliances, verify that the inverter's AC output voltage (220V/230VAC) matches the requirements of your devices.
10. Warranty and Support
The SUMRY Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal operating conditions.
For warranty claims, technical support, or further assistance, please contact your point of purchase or the official SUMRY customer service channels. Please have your product model and purchase date available when contacting support.