1. Safety Precautions
When the power is on, the soldering iron tip temperature is between 100°C-450°C (212°F-842°F). Misuse can lead to burns or fire. Please strictly observe the following:
- Do not touch the soldering iron tip or surrounding metal parts.
- Do not use the soldering iron near flammable materials.
- Inform others in the workspace that the soldering iron tip is hot to prevent accidents.
- Turn off the power when resting or after completing work.
- When replacing parts or the soldering iron tip, turn off the machine and wait for the tip to cool down to room temperature.
- This product uses the rated voltage and frequency (refer to the label on the back of the machine).
- Do not use this product if it is damaged, especially if the power cable is compromised.
- This product uses a three-wire grounded plug and must be inserted into a three-hole grounded socket. Do not modify the plug or use an ungrounded adapter. If an extension cord is needed, use a grounded three-wire power cord.
- Do not use the soldering iron for any work other than soldering.
- Do not knock the soldering tip on the workbench to clean it, as this can severely damage the tip.
- Use original factory parts when replacing components.
- Do not tamper with the soldering iron without proper safety precautions.
- Do not wet the soldering iron, and do not use it with wet hands.
- Soldering produces smoke; ensure adequate ventilation in the work area.
- Do not harm yourself or others when using the machine.
- Children are unaware of the dangers of electrical products. Do not use or store this station in a place accessible to children. Do not allow children to approach or touch this station.
2. Product Overview
The AIFEN A5Pro is a 120W soldering station designed for electronics repair, featuring rapid heating, precise temperature control, and a wire-controlled handle. It supports various soldering iron tips (115, 210, 245) for different applications.

Figure 2.1: AIFEN A5Pro Soldering Station highlighting Temperature Calibration, Temperature Storage, and 2s Temperature Rise.

Figure 2.2: AIFEN A5Pro Soldering Station showing its wide temperature range and digital display for various solder joint sizes.
Video 2.1: Demonstration of AIFEN A5Pro features including instant temperature rise, temperature adjustment, memory channels, and rapid heating.
Key Features:
- 2s Heat Up: Achieves working temperature rapidly.
- Multiple Chip Repair: Suitable for various chip sizes and types.
- Magnetic Sleep Mode: Automatically enters sleep mode when placed in the stand, with rapid temperature recovery upon lifting.
- Dual-Button Controller Sleep Mode: Allows for manual sleep mode activation.
- Three-Level Temperature Memory Storage: Stores three frequently used temperature settings for quick recall.
- Hot-swappable Heating Core: Easy replacement of heating elements without disassembling other parts.
- Pure Copper Transformer: Ensures powerful and stable voltage transformation.
- Celsius and Fahrenheit Display: Temperature can be displayed in both units.
- Wire-Controlled Handle: Temperature can be adjusted directly from the handle.
- Plug-in Design: Handle and heating element feature a convenient plug-in design for easy installation and removal.
- Enhanced Cleaning: Includes high-quality cleaning steel wire and sponge sheet to extend tip life and improve efficiency.
- Compact Size: Space-saving design for various workspaces.
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | AIFEN-A5pro |
| Input Voltage | AC100-AC240V 50/60Hz |
| Power | 120W |
| Peak Power | 160W (MAX) |
| Temperature Control Range | 100℃-450℃ (212℉-842℉) |
| Handle Type | Wire-Controlled Handle |
| Handle Length | 1.6m |
| Soldering Iron Tip Compatibility | 115/210/245 series |
| Equipment Size | 140×123×105mm |
| Product Weight | 0.66Kg |
| Certification | CE, FCC |
4. Setup Instructions
Before connecting or disconnecting the handle, ensure the power is off to prevent damage to the control circuit board.
- Connect the Handle: Connect the wire-controlled handle to the handle socket on the main unit.
- Install Heating Core: Insert the required heating core into the handle.
- Position the Station: Place the soldering station on a stable surface and rest the handle in its designated holder.
- Connect Power: Plug the power cord into a grounded three-hole socket.
- Power On: Flip the power switch to the ON position. The display window will show "---", indicating the soldering station is in standby mode.

Figure 4.1: Labeled diagram of the AIFEN A5Pro Soldering Station components.
5. Operating Instructions
5.1 Temperature Adjustment
- Increase Temperature: Press the "▲" button once to increase the set temperature by 1°C. The display will show the new set temperature. Press and hold "▲" for at least one second for rapid temperature increase until the button is released at the target temperature.
- Decrease Temperature: Press the "▼" button once to decrease the set temperature by 1°C. The display will show the new set temperature. Press and hold "▼" for at least one second for rapid temperature decrease until the button is released at the target temperature.
- Handle Temperature Adjustment (Wire-Controlled Handle): In working state, use the temperature adjustment buttons on the handle to increase or decrease the temperature.
5.2 Temperature Memory Storage and Recall
- Store Temperature: After setting the desired temperature, select the channel (CH1, CH2, or CH3) where you want to save it. Press and hold the corresponding CH button (e.g., CH1) to store the current temperature.
- Recall Temperature: To recall a stored temperature, short press the corresponding CH button (e.g., CH1) for less than one second. The station will instantly switch to the saved temperature.

Figure 5.1: Temperature memory storage buttons (CH1, CH2, CH3) for quick switching.
5.3 Celsius/Fahrenheit Conversion
- While the unit is powered on, double-press the "SET" button to switch between Celsius (°C) and Fahrenheit (°F) display.
5.4 Key Lock Setting
- When the main unit is off, press and hold the "CH1" button. Then, turn on the power switch. This will toggle the key lock function. "☑" indicates enabled, "" indicates disabled.
5.5 Buzzer Setting
- When the main unit is off, press and hold the "CH2" button. Then, turn on the power switch. This will toggle the buzzer sound. "" indicates enabled (with a prompt sound), "X" indicates disabled.
5.6 Standby Temperature Setting
- When the main unit is off, press and hold the "CH3" button. Then, turn on the power switch to enter the standby temperature setting interface. Available standby temperatures are 0°C/150°C/180°C/200°C (0°C turns off standby temperature). After setting, short press CH3 to save and exit.
5.7 Calibration Temperature
- Every time the heating element is replaced, the temperature must be recalibrated. Press and hold the "SET" button to enter the temperature calibration mode. Use the temperature setting buttons "▲" / "▼" to calibrate the temperature, and finally press "SET" to save and exit.
5.8 Handle Machine Switch (Wire-Controlled Handle)
- In working state, simultaneously press and hold both temperature adjustment buttons on the handle to turn on/off the host interface.
6. Maintenance
6.1 Soldering Iron Tip Care
- Optimal Temperature: High temperatures can weaken the tip's function. Always choose the lowest possible temperature that allows for effective soldering. The A5Pro's tip has excellent temperature recovery, enabling full soldering at lower temperatures to protect sensitive components.
- Regular Cleaning: Use a clean sponge or the cleaning steel wire ball to clean the tip regularly. After soldering, oxides and carbides from residual flux can damage the tip, causing soldering errors or reducing heat conduction.
- Cleaning When Not in Use: If the soldering iron is not in use, do not leave it at high temperatures for extended periods. This can convert flux into oxides on the tip.
- Tip Condition Check: Set the temperature to 250°C (482°F). Once stable, clean the tip with a cleaning sponge and inspect its condition.
- Removing Black Oxide: If the tinned part of the tip has black oxide, coat it with a new layer of tin, then wipe it with a clean sponge until the oxide is completely removed. Re-coat with a new tin layer.
- Tip Replacement: If the soldering iron tip is deformed or heavily rusted, it must be replaced.

Figure 6.1: Plug-in design for easy heating element replacement and tip cleaning process.
6.2 Heating Core Replacement
The A5Pro soldering station uses an integrated heating core with the soldering head. To replace it:
- Turn off the power and allow the unit to cool down completely.
- Directly unplug the old heating core.
- Plug in the new heating core.
7. Troubleshooting
- No Power: Ensure the power cord is securely connected and the power switch is ON. Check for any damage to the power cable.
- Temperature Not Reaching Set Point: Verify the heating core is properly installed. If the issue persists, consider recalibrating the temperature or replacing the heating core.
- Inconsistent Soldering: Clean the soldering iron tip thoroughly. Ensure the tip is properly tinned. If the tip is worn or damaged, replace it.
- Display Issues: If the display shows unusual characters or is blank (and not in standby), power cycle the unit. If the problem continues, contact support.
- Buttons Unresponsive: Check if the key lock function is enabled (refer to section 5.4).
8. User Tips
- Unboxing Video: It is recommended to record an unboxing video when you receive the product to document the condition of the machine and accessories. This can be helpful in case of any issues.
- Temperature Presets: Utilize the three-level temperature memory storage (CH1, CH2, CH3) to quickly switch between commonly used temperatures for different soldering tasks, saving time and improving workflow efficiency.
- Handle Comfort: The wire-controlled handle features a thickened frosted silicone protective sleeve and high-temperature resistant, anti-scalding silicone material for the wire, ensuring comfortable and safe operation during extended use.
9. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)