1. Introduction
Thank you for purchasing the LED Magnifying Desk Lamp. This versatile tool is designed to provide illuminated magnification for various tasks such as soldering, repairs, crafts, hobbies, nail art, and reading. It features adjustable lighting modes and brightness levels to suit your specific needs. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your lamp.
2. Safety Instructions
- Always ensure the lamp is connected to a compatible USB power source (e.g., 5V/1A or 5V/2A USB adapter).
- Do not expose the lamp to water or excessive moisture.
- Avoid looking directly into the LED lights for extended periods to prevent eye strain.
- Keep the magnifying lens clean and free from scratches to maintain clear vision.
- Ensure the desk clamp is securely fastened to a stable surface before use.
- Do not attempt to disassemble or modify the lamp, as this may void the warranty and pose a safety risk.
3. Package Contents
Please check the package for the following items:
- 1 x LED Magnifying Lamp Unit (with lens and LED ring)
- 1 x Flexible Gooseneck Arm (Type B) OR 1 x Articulated Arm (Type A)
- 1 x Desk Clamp
- 1 x USB Power Cable with Inline Controller
4. Setup Instructions
- Attach the Desk Clamp:
Securely fasten the desk clamp to a stable surface such as a desk or workbench. Turn the screw on the clamp until it is tight. For Type B, the clamp width is 2.4 inches. For Type A, the clamp supports a maximum table thickness of 2.1 inches and a minimum width of 1.4 inches. The clamp features a sponge design to prevent damage to your table. - Insert the Lamp Arm:
Insert the base of the lamp's arm (either gooseneck or articulated) into the hole on the top of the desk clamp. Ensure it is firmly seated. - Connect Power:
Plug the USB power cable into a compatible USB power adapter (not included) or a USB port on your computer.
5. Operating Instructions
5.1 Adjusting the Lamp Arm
- Type B (Gooseneck Arm): The flexible gooseneck hose (14.9 in / 37.85 cm) allows for easy 360-degree adjustment of the lighting angle. Simply bend the gooseneck to position the lamp as needed.
- Type A (Articulated Arm): This model features an articulated arm with 3 knobs and 4 springs, allowing for stable positioning at any desired angle. Adjust the arm sections to achieve your preferred height and orientation.
5.2 Using the Inline Controller
The USB power cable includes an inline controller with the following buttons:
- ON/OFF Button: Press to turn the lamp on or off.
- '+' Button (Increase Light): Press to increase the brightness level. There are 10 brightness dimming levels, allowing adjustment between 10% and 100%.
- '-' Button (Decrease Light): Press to decrease the brightness level.
- Circle Arrow Button (Change Light Color): Press to cycle through the 3 available lighting modes: Warm Light (3000K), Natural Light (4500K), and Cold Light (6000K).
5.3 Using the Magnifying Glass
- Position the magnifying glass over the object you wish to view.
- Adjust the lamp arm to bring the lens to the optimal distance for clear magnification. For the 10X magnification lens (Type A), the ideal distance for the magnification effect is typically between 5 and 20 cm from the object.
- Adjust the light brightness and color mode for the best visibility.
6. Maintenance
- Cleaning the Lens: Use a soft, lint-free cloth, preferably a microfiber cloth, to gently wipe the lens. For stubborn smudges, slightly dampen the cloth with lens cleaning solution or water. Avoid abrasive cleaners.
- Cleaning the Lamp Body: Wipe the lamp body and arm with a dry or slightly damp cloth. Do not use harsh chemicals.
- Storage: When not in use, store the lamp in a clean, dry place to protect it from dust and damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power or loose connection | Ensure the USB cable is securely plugged into both the lamp and a working USB power source. Check if the power adapter is functional. |
| Light is too dim or too bright | Brightness setting needs adjustment | Use the '+' and '-' buttons on the inline controller to adjust the brightness to your desired level. |
| Magnification is blurry or unclear | Incorrect distance or dirty lens | Adjust the lamp arm to bring the lens closer or further from the object until the image is clear. Clean the lens if necessary. |
| Lamp arm is unstable (Type B) | Gooseneck not positioned correctly | Ensure the gooseneck is bent into a stable position. If the clamp is loose, re-tighten it. |
| Lamp arm is unstable (Type A) | Arm joints or clamp are loose | Tighten the knobs on the articulated arm joints. Ensure the desk clamp is securely fastened. |
8. Specifications
| Feature | Specification (Type B) | Specification (Type A) |
|---|---|---|
| Magnification | 5X | 10X |
| Lens Diameter | 2.36 inches | 4.3 inches (Real Glass Lens) |
| Light Source | LED Light | 72 Pcs Professional LED Lamp Beads |
| Color Modes | 3 (Warm 3000K, Natural 4500K, Cold 6000K) | 3 (Warm 3000K, Warm & White 4200K, Cold White 6000K) |
| Brightness Levels | 10 (Stepless dimming 10%-100%) | 10 (Stepless dimming 10%-100%) |
| Arm Type | Flexible Gooseneck Hose (14.9 in / 37.85 cm) | Articulated Arm with 3 Knobs and 4 Springs |
| Clamp Width/Thickness | 2.4 inches | Max 2.1 inches thickness, Min 1.4 inches width |
| Power Source | USB Powered | USB Powered |
| Material | Plastic | Aluminum + Iron + PAS |
| Certification | CE | CE |
| Eye Protection Features | Energy-saving, Eye protection | No Flicker, Memory Function, Eyes Care, Long Life |
9. User Tips
- Power Adapter: For optimal performance, use a standard USB power adapter (e.g., a phone charger) that provides 5V and at least 1A (2A is recommended for brighter illumination).
- Hands-Free Operation: The sturdy clamp and adjustable arm allow for completely hands-free operation, making it ideal for intricate tasks like needlework, soldering, or crafting.
- Versatile Applications: This lamp is widely used for various activities including needlework, art crafts, electronic repair, and reading.
10. Warranty and Support
For any questions, issues, or support needs regarding your LED Magnifying Desk Lamp, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.
