1. Introduction
The DPC245 Display Screen is a high-contrast TFT LCD color speedometer designed for electric bicycles equipped with BAFANG mid-drive motors. It features Bluetooth 5.0 connectivity, a USB port for mobile device connection, and allows integration with the Bafang GO+ application for monitoring and synchronizing riding data. This manual provides essential information for the proper installation, operation, and maintenance of your DPC245 display.
2. Safety Information
- Always ensure the display is securely mounted before riding.
- Do not attempt to disassemble or modify the display, as this may void the warranty and cause damage.
- Keep the display clean and dry. Avoid exposure to extreme temperatures or direct sunlight for prolonged periods.
- Operate your e-bike responsibly and adhere to all local traffic laws.
3. Package Contents
The DPC245 Display Screen package typically includes:
- 1 x DPC245 Electric Bicycle Display Unit
4. Specifications
| Feature | Specification |
|---|---|
| Model | DPC245 |
| Display Type | TFT LCD Color Screen |
| Connectivity | Bluetooth 5.0, USB Port |
| Compatibility | BAFANG Mid Motors (M400, M500, M510, M600, M560, M420, M800, M820) and some hub motor controllers. |
| Plug Type | Triangular Green Plug (CAN protocol) |
| Material | Plastic |
| Color | Black |
| Package Dimensions (L x W x H) | 15 cm x 10 cm x 6 cm |
| Package Weight | 0.11 kg |
5. Setup and Installation
- Handlebar Mounting: Securely attach the DPC245 display unit to your e-bike's handlebars. Ensure it is positioned for optimal visibility and access to the control buttons. The mounting bracket typically requires a torque of 1 Nm for secure fastening.
- Connect the Remote Control: Attach the remote control unit to the handlebar next to the display, ensuring comfortable thumb access to the buttons.
- Wiring: Connect the display's triangular green plug to the corresponding port on your BAFANG mid-drive motor or compatible hub motor controller. Ensure the connection is firm and secure. This display is specifically designed for BAFANG CAN protocol motors such as M400, M500, M510, M600, M560, M420, M800, and M820.
- Cable Management: Route all cables neatly and securely along the frame, using cable ties if necessary, to prevent interference with moving parts and protect them from damage.
6. Operation
- Power On/Off: Press and hold the power button on the remote control to turn the display on or off.
- Reading Data: The high-contrast TFT LCD screen clearly shows essential riding data such as current speed (km/h), battery percentage, trip distance, and assist level (S+).
- Navigation: Use the controller buttons on the remote to navigate through different display modes and settings. Specific button functions may vary based on your e-bike's firmware.
- USB Port: The integrated USB port can be used to connect and charge mobile devices during your ride.
- Bluetooth Connectivity: Utilize the Bluetooth 5.0 function to connect the display to the Bafang GO+ application on your smartphone. This allows for advanced monitoring and synchronization of your riding data.
7. Maintenance
- Cleaning: Use a soft, damp cloth to clean the display screen and body. Avoid abrasive cleaners or solvents that could damage the plastic or screen coating.
- Storage: When not in use for extended periods, store the e-bike and display in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all connections and mounting points to ensure they remain secure.
8. Troubleshooting
- Display Not Powering On: Check all cable connections, especially the triangular green plug, to ensure they are fully seated. Verify that your e-bike's battery is charged and properly connected.
- No Data Displayed: If the display powers on but shows no data, ensure the connection to the motor controller is secure. Restart the system by powering off and on.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on your smartphone and the Bafang GO+ app is installed and updated. Try restarting both the display and your phone.
9. User Tips
- Compatibility Check: Always confirm that your e-bike's motor is a BAFANG mid-drive motor using the CAN protocol (e.g., M400, M500, M510, M600, M560, M420, M800, M820) before purchasing or installing the DPC245 display. This display is not compatible with all motor brands, such as BOSCH motors.
- App Integration: For the best experience, download and utilize the Bafang GO+ app to unlock additional features and track your rides comprehensively.
10. Warranty and Support
For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.
