1. Introduction
Thank you for choosing the Hauswirt G1 Travelling Edge Bean Grinder. This electric coffee grinder is designed for both household and commercial use, offering precise and consistent grinding for various brewing methods. Featuring a 64mm stainless steel flat knife cutterhead, 100 grinding gears, and an anti-static design, the G1 ensures a superior coffee experience with minimal residual powder. Please read this manual thoroughly before operation to ensure safe and efficient use.
2. Important Safety Instructions
- Read all instructions before using the appliance.
- Ensure the voltage rating of the appliance matches your local power supply (220V-50Hz).
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Keep hands and utensils away from moving parts during operation to prevent injury.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- This appliance is for grinding coffee beans only. Do not use it for other purposes.
- Keep out of reach of children.
- The appliance features an automatic power-off function when disassembled for safety.
3. Product Components
The Hauswirt G1 grinder consists of the following main parts:
- Bean Hopper: Holds whole coffee beans. Available in two capacities: 65g (single serving) and 250g (soybean warehouse).
- Hopper Lid: Covers the bean hopper.
- Grinding Adjustment Ring: All-metal thread for precise grind size adjustment (100 gears).
- Cutterhead: 64mm stainless steel flat knife (shark tooth knife shape design).
- IMD Display Touch Panel: For setting grinding time/quantity.
- Point-Press Switch: For one-click start of grinding.
- Powder Dispenser: Helps to release residual powder.
- Portafilter Bracket: Standard Italian bracket, adjustable height to fit different portafilter sizes.
- Power Cord: 1.1m long.


4. Setup Instructions
4.1 Unpacking and Initial Inspection
- Carefully remove all components from the packaging.
- Check for any damage during transit. If any damage is found, do not operate the grinder and contact customer support.
- Ensure all items from the packing list are present: Bean grinder, hexagonal wrench, powder dispenser, powder brush, single serving bean bin, soybean bin.
4.2 Power Connection and Plug Adapter
The Hauswirt G1 operates on 220V. Depending on your region, a suitable plug adapter may be included or required.
| Adapter Type | Image | Regions |
|---|---|---|
| EU Plug Adapter | Most Europe, African, Middle East Countries, South Korea, Chile, Paraguay, etc. | |
| US Plug Adapter | United States, Canada, Most North and South American Countries, Japan, Philippines, Thailand, etc. | |
| AU Plug Adapter | Australia, New Zealand, Argentina | |
| UK Plug Adapter | England, Ireland, Scotland, Hong Kong, Pakistan, Singapore, Malaysia, Vietnam, etc. |
4.3 Assembling the Grinder
- Place the grinder on a stable, flat surface.
- Choose the desired bean hopper (single serving or larger capacity) and place it securely on top of the grinder. Ensure the bean warehouse lock is engaged to prevent leakage and for safety.
- Attach the hopper lid.
- Plug the power cord into a suitable electrical outlet.
5. Operating Instructions
5.1 Adjusting Grind Size
The Hauswirt G1 offers 100 fine grinding gears, suitable for all brewing methods. The all-metal thread grinding adjustment ring allows for infinite adjustment.
- Rotate the grinding adjustment ring located below the bean hopper to select your desired grind size.
- Refer to the table below for recommended settings for common brewing methods.
| Coffee Type | Grinding Particles | Grinding Gear |
|---|---|---|
| Espresso | Fine | 1-20 |
| Mocca Moka Pot | Medium-Fine | 20-40 |
| Pour-over / Hand Brewed Coffee | Medium | 40-80 |
| French Press | Coarse | 80-100 |


5.2 Grinding Coffee Beans
- Pour fresh coffee beans into the bean hopper.
- Place your portafilter or ground coffee container under the powder outlet. Adjust the height of the portafilter bracket if necessary.
- Use the IMD display touch panel to set the desired grinding time or quantity.
- Press the point-press switch to start grinding. The grinder will automatically stop once the set time/quantity is reached.
- After grinding, gently tap the powder dispenser to ensure all residual powder falls out, thanks to the scientific direct falling powder structure and plasma anti-static feature.


6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your grinder.
6.1 Daily Cleaning
- After each use, gently tap the powder dispenser to clear any remaining grounds.
- Use the provided powder brush to clean the powder outlet and surrounding areas.
6.2 Deep Cleaning (Weekly/Bi-weekly)
- Unplug the grinder from the power outlet.
- Remove the bean hopper and lid. The bean hopper has a lock for easy removal without leakage.
- The cutterhead and bean box feature a quick-release structure for easy disassembly. Carefully remove these parts for cleaning. The grinder will automatically power off when disassembled for safety.
- Use the provided hexagonal wrench to access and clean the cutterhead.
- Brush away any accumulated coffee grounds from the burrs and internal components.
- Wipe down the exterior of the grinder with a damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
- Ensure all parts are completely dry before reassembling.
- Reassemble the grinder, ensuring all parts are securely in place.


7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grinder does not turn on | Not plugged in; power outage; bean hopper not correctly installed; safety switch engaged. | Check power connection; ensure bean hopper is securely in place; check for automatic power-off if disassembled. |
| Beans are not grinding or grinding slowly | Cutterhead clogged with old grounds; foreign object in hopper; motor overheating. | Unplug and clean the cutterhead thoroughly; remove any foreign objects; allow motor to cool down. |
| Inconsistent grind size | Cutterhead needs cleaning; grind setting too coarse/fine for desired output. | Perform a deep clean of the cutterhead; adjust grind setting as per Section 5.1. |
| Excessive static or residual powder | Environmental humidity; lack of plasma anti-static function engagement. | Ensure the plasma anti-static feature is functioning; gently tap the powder dispenser after grinding. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Haishi G1 Edge Grinder |
| Brand Name | Hauswirt (also DUTRIEUX) |
| Model | G1 |
| Product Color | Off-white |
| Type of Cutterhead | Stainless steel flat knife (64mm) |
| Maximum Power | 260W |
| Rated Voltage | 220V-50Hz |
| Mode of Operation | Touch operation |
| Product Dimensions (Small Bean Bin) | 208 × 130 × 327mm |
| Product Dimensions (Large Bean Bin) | 208 × 130 × 417mm |
| Max. Bean Bin Capacity | 250g |
| Package Dimensions (approx.) | Length: 27cm, Width: 19cm, Height: 51cm |
| Package Weight (approx.) | 4.6kg |
| Certification | CE |
| Origin | Mainland China |

9. User Tips
- For best results, always use fresh, high-quality coffee beans.
- Experiment with different grind settings to find the perfect consistency for your preferred brewing method and coffee type.
- Clean the grinder regularly, especially the burrs, to prevent oil buildup and ensure consistent grind quality.
- Utilize the plasma anti-static feature and powder dispenser to minimize mess and maximize yield.
- The dual bean warehouse option allows for flexibility; use the smaller bin for single servings to keep the majority of your beans fresh.
10. Frequently Asked Questions (FAQ)
- Q: How do I achieve the best grind consistency?
- A: Regular cleaning of the burrs is crucial. Also, ensure you are using fresh beans and selecting the appropriate grind setting for your brewing method.
- Q: Is it normal to have some residual powder?
- A: While the G1 is designed to minimize residual powder with its direct falling structure and anti-static features, a very small amount of loss is normal during the grinding process. Gently tapping the powder dispenser helps to release most of it.
- Q: Can I grind other items besides coffee beans?
- A: No, this grinder is specifically designed for coffee beans. Grinding other items may damage the burrs or motor and void your warranty.
- Q: What should I do if the grinder stops working?
- A: First, check the power connection and ensure the bean hopper is correctly installed. The grinder has a safety feature that powers it off if disassembled. If the issue persists after checking these, refer to the troubleshooting section or contact customer support.
11. Warranty and Support
The Hauswirt G1 Travelling Edge Bean Grinder is manufactured to high-quality standards. For any issues or inquiries, please contact your retailer or the manufacturer's customer support. Please retain your proof of purchase for warranty claims.