CYCPLUS Volcano Electric Smart SUP Air Pump User Manual

1. Introduction

Thank you for choosing the CYCPLUS Volcano Electric Smart SUP Air Pump. This high-performance, rechargeable air pump is designed for efficient inflation and deflation of various inflatable items, including SUP boards, inflatable tents, boats, kayaks, and mattresses. With its powerful 240W motor, 5200mAh battery, and intelligent features like automatic shut-off and a dual LED display, the Volcano pump provides a convenient and precise solution for your outdoor inflation needs. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Package Contents

Please check the package for the following items:

• CYCPLUS Volcano Electric Air Pump
• Air Hose
• Various Air Nozzles (for different inflatable items)
• Type-C Charging Cable
• Charger
• User Manual

3. Specifications

4. Safety Information

• Keep the pump away from water and moisture. This device is not waterproof.
• Do not operate the pump in direct sunlight for extended periods, as this may cause overheating.
• Ensure the air hose is securely connected to both the pump and the inflatable item before starting operation.
• Do not block the air intake or exhaust ports during operation.
• Keep children and pets away from the pump during use.
• Do not point the air nozzle at eyes or body parts.
• Store the pump in a cool, dry place when not in use.
• Use only the provided charger and Type-C cable for charging.
• Do not attempt to disassemble or modify the pump.

5. Setup

5.1 Charging the Pump

Before first use, fully charge the pump. Connect the provided Type-C charging cable to the pump's charging port and the other end to the charger. Plug the charger into a power outlet. The dual LED display will indicate the charging status. A full charge takes approximately 3.5 hours with the included 30W fast charger.

5.2 Attaching the Air Hose and Nozzle

1. Identify the correct air nozzle for your inflatable item. The pump comes with various nozzles to fit different valves.
2. Attach the chosen nozzle to one end of the air hose.
3. For inflation, connect the other end of the air hose to the pump's inflation port (usually marked or indicated in the video). Ensure a secure connection.
4. For deflation, connect the other end of the air hose to the pump's deflation port.

6. Operating Instructions

6.1 Inflation

1. Connect the air hose with the appropriate nozzle to the pump's inflation port and to the valve of your inflatable item.
2. Turn on the pump. The dual LED display will show the current pressure.
3. Use the '+' and '-' buttons to set your desired target pressure (PSI).
4. Press the power button to start inflation. The pump operates in two stages: initially a rapid inflation stage (less noticeable noise) followed by a pressurization stage (more noticeable noise). This is normal.
5. The pump will automatically stop once the preset target pressure is reached.

6.2 Deflation

1. Connect the air hose to the pump's deflation port and to the valve of your inflatable item.
2. Press the valve port on your inflatable item to release some high-pressure air initially.
3. Press the power button on the pump to start deflation.
4. Note: The pump will not automatically pause after deflation is complete. Please turn it off manually in time to prevent damage.

6.3 Button Functions

• Power Button: Start/Stop inflation or deflation.
• Unit Button: Switch between pressure units (e.g., PSI, Bar).
• '+' / '-' Buttons: Increase/Decrease the target pressure.

7. Maintenance

• Clean the pump's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure the air intake and exhaust vents are free from dust and debris.
• Store the pump and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures.
• Regularly check the air hose and nozzles for any signs of wear or damage. Replace if necessary.

8. Troubleshooting

• Pump not turning on: Ensure the battery is charged. If not, connect to the charger.
• Pump not inflating: Check if the air hose and nozzle are securely connected to both the pump and the inflatable item. Verify that the target pressure is set above the current pressure.
• Slow inflation: Ensure the air intake is not blocked. The pump operates in two stages; the second stage (pressurization) is slower but builds higher pressure.
• Excessive noise during operation: The pump's pressurization stage naturally produces more noticeable noise. This is normal operation and not a cause for concern.
• Pump overheating: Allow the pump to cool down if it feels excessively hot. Avoid operating in direct sunlight for prolonged periods.

9. User Tips

• Pre-set Pressure: Always pre-set your desired pressure before starting inflation to utilize the automatic shut-off feature and prevent over-inflation.
• Battery Life: The 5200mAh battery is capable of inflating multiple SUP boards (e.g., five 10.6ft boards to 15 PSI, or seven to 12 PSI) on a single charge. Plan your charging accordingly for longer trips.
• Power Bank Functionality: The pump can also serve as a power bank with a 26000mAh capacity, useful for charging other devices on the go.
• Deflation Reminder: Remember to manually turn off the pump after deflation is complete, as it does not auto-pause for deflation.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official CYCPLUS website. Keep your purchase receipt as proof of purchase.