TELESIN T13 Bluetooth Remote Control

Contents

TELESIN T13 Bluetooth Remote Control User Manual

Model: S5-RMT-01-TGP

1. Product Overview

The TELESIN T13 Bluetooth Remote Control is designed to enhance your action camera experience, offering convenient control over your GoPro Hero 8, 9, 10, 11, 12, 13, and Max cameras. Featuring a 1.4-inch color screen, it provides real-time status display and allows for effortless switching between various shooting modes.

TELESIN T13 Bluetooth Remote Control with screen displaying video mode
Figure 1: TELESIN T13 Bluetooth Remote Control

Package Contents:

  • T13 Bluetooth Remote Control
  • Wrist strap
  • Charging cable (USB-C)
  • Instruction manual (this document)
Diagram showing the contents of the TELESIN T13 Bluetooth Remote Control package
Figure 2: Product List and Components

2. Setup Guide

2.1. Basic Components

  • Power Button: Used for powering on/off and returning in menus.
  • Status Light: Indicates device status.
  • Mode Button: Switches between modes, marks favorite moments.
  • Tool Button: Navigates menu options, enters sub-shooting modes.
  • Shutter Button: Confirms selections, starts/stops recording.
  • USB-C Port: For charging.
  • Fixing Slot: For attaching the wrist strap.

2.2. Wristband Installation

  1. Thread the wrist strap through the slots on the back of the remote control.
  2. Adjust the position of the remote along the direction of the wrist strap for comfortable wearing.
  3. Thread the end of the strap through the plastic ring.
  4. Fold the strap back and secure it using the hook-and-loop fasteners. Fold any excess strap for enhanced security.
Images demonstrating how to attach and wear the Lycra wristband with the remote control
Figure 3: Wristband Installation and Usage

2.3. Initial Pairing with GoPro Camera

  1. Power On: Press and hold the Power Button for 3 seconds to turn on the remote control.
  2. Select Language: Use the Tool Button to navigate to the language option and press the Shutter Button to confirm your selection (e.g., English).
  3. Enter Pairing Mode: Press the Shutter Button to enter the "Pair New Device" option. The remote control will begin scanning for a signal.
  4. Prepare GoPro: On your GoPro camera, navigate to its settings and enable the remote control pairing mode (usually found under 'Connections' or 'Wireless Connections').
  5. Complete Pairing: The remote control will automatically search for and connect to the nearest compatible GoPro device. Once connected, the remote's screen will display the camera's status.
Video 1: Detailed Setup and Operation Guide

3. Operating Instructions

3.1. Powering On/Off

  • To Power On: Press and hold the Power Button for 3 seconds.
  • To Power Off: Press and hold the Power Button for 3 seconds.

3.2. Camera Mode Selection

  • Switch Modes: Press the Mode Button to cycle through main camera modes (e.g., Video, Photo, Time-Lapse).
  • Select Sub-Modes: Press the Tool Button to view and select presets or sub-modes within the currently selected main mode.
Image showing the remote control screen displaying various camera modes and sub-modes
Figure 4: Effortlessly Switch Modes

3.3. Capturing Photos and Videos

  • Start/Stop Recording: Press the Shutter Button to start capturing. Press it again to stop.
  • Quick Wake & Record: When the camera is in sleep mode, a single press of the Shutter Button will wake the camera and immediately begin recording. Pressing it again will stop recording and shut down the camera.
  • Mark Moments: During video recording, press the Mode Button to mark important moments.
Image illustrating one-click camera turn on/off functionality with the remote control
Figure 5: One-Click Camera On/Off

3.4. Remote Control Settings (RC Setup)

To access RC settings, press the Power Button to enter the settings menu.

  • Pair New Device: Connect to a new GoPro camera via Bluetooth.
  • Connect To: Switch between previously paired GoPro cameras.
  • Reset: Clear all existing Bluetooth connections on the remote control.
  • Backlight: Adjust the screen brightness with 5 levels: 20%, 40%, 60%, 80%, 100%.
  • Orientation: Adjust the display orientation (0°, 90°, 180°, 270°, 360°).
  • Language: Switch between 6 supported languages: English, Simplified Chinese, Traditional Chinese, Spanish, Japanese, Korean.
  • Exit: Exit the RC settings menu.

4. Maintenance

4.1. Charging

The remote control features a USB-C charging port.

  • Open the waterproof plug and insert the charging cable into the remote control's USB-C port.
  • Connect the other end of the cable to a computer, wall adapter, or other USB power source.
  • Charging Time: Approximately 1.5 hours.
  • Usage Time: Approximately 5 hours on a full charge.

Note: Please keep charging equipment away from metal objects to prevent short circuits. The screen will light up and display charging status during charging.

4.2. Waterproof Performance

The remote control is waterproof to a depth of 1 meter (3.28 feet). This means it can still be used normally if it is accidentally dropped in water and then retrieved.

Important: The Bluetooth function does not work underwater. The remote control loses functionality when fully submerged in water, even if it is rated for 1 meter for accidental exposure.

Image showing the remote control being used near water, with a note about Bluetooth not functioning underwater
Figure 6: Waterproof Performance for Water Activities

4.3. Cleaning

To clean the remote control, wipe it with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.

5. Troubleshooting

  • Remote not powering on: Ensure the battery is charged. Press and hold the Power Button for 3 seconds.
  • Unable to pair with GoPro: Make sure your GoPro camera is compatible (Hero 8, 9, 10, 11, 12, 13, or Max). Ensure the GoPro's remote control pairing mode is activated. Try resetting the remote control's connections via the 'Reset' option in RC settings and re-pairing.
  • Bluetooth connection issues: Ensure the remote and camera are within the 60m/197ft range. Avoid physical obstructions. Bluetooth does not work underwater.
  • Screen is too dim/bright: Adjust the backlight setting in the RC settings menu (5 levels available).
  • Remote control is unresponsive: Try restarting both the remote control and the GoPro camera.

6. Specifications

FeatureSpecification
Model NumberS5-RMT-01-TGP
MaterialABS + TPU
Dimensions (L x W x H)68 x 41 x 19 mm (2.67 x 1.61 x 0.75 inches)
Weight37g
Compatible CamerasGoPro Hero 8, Hero 9, Hero 10, Hero 11, Hero 12, Hero 13, GoPro Max
Control RangeUp to 60 meters (197 feet)
Battery LifeApprox. 8 hours (usage)
Charging TimeApprox. 1.5 hours
Charging PortUSB-C
Waterproof Rating1 meter (3.28 feet) for accidental drops (Bluetooth not functional underwater)
Screen1.4-inch Color Screen with 5-level brightness adjustment
Supported LanguagesEnglish, Simplified Chinese, Traditional Chinese, Spanish, Japanese, Korean

7. User Tips

  • Compatibility Check: This remote control is specifically designed for GoPro Hero 8, 9, 10, 11, 12, 13, and Max cameras. It is not compatible with Insta360, DJI Action, or older GoPro models like Hero 3+.
  • USB-C Charging: The remote uses a standard USB-C port for charging, ensuring broad compatibility with modern chargers.
  • Managing Multiple Cameras: While the remote can be paired with multiple GoPro cameras, it can only actively control one at a time. Use the 'Connect To' option in the RC settings to switch between paired devices. If you encounter issues, use 'Reset' to clear all connections and re-pair.
  • Underwater Use Limitation: Remember that while the remote is waterproof to 1 meter for accidental exposure, its Bluetooth functionality ceases to work underwater. Plan your shots accordingly.
  • Screen Brightness: Adjust the 5-level screen brightness in the RC settings to optimize visibility in various lighting conditions, from bright sunlight to low-light environments.

8. Warranty and Support

8.1. Warranty Information

TELESIN products come with a 6-month warranty period, starting from the day you receive the product. Please retain your proof of purchase for warranty claims.

8.2. Important Safety Information

This product contains a button or coin battery. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

8.3. Regulatory Compliance (Summary)

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

8.4. Additional Resources

For a detailed PDF version of the user manual, please refer to the official documentation available at: TELESIN T13 User Manual (PDF)

For further support, please visit the official TELESIN website: www.telesin.com


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.