Douk Audio NS-10P

Contents

Douk Audio NS-10P Mini Tube Preamplifier User Manual

Model: NS-10P

1. Introduction

The Douk Audio NS-10P is a compact and high-fidelity tube preamplifier designed to enhance your audio system. It features a 3.5mm AUX input and output, allowing easy connection to various audio sources and output devices. The preamplifier utilizes pluggable 6J1 tubes, offering a warm and soft sound signature, and supports tube rolling for sound customization. Independent treble, bass, and volume controls provide precise tonal adjustment, making it suitable for a wide range of music genres.

This preamplifier is intended to be connected with power amplifiers or active speakers, and is not designed to directly drive headphones.

2. Package Contents

Please check the box for the following items:

  • 1 x NS-10P Tube Preamplifier
  • 2 x 6J1 Tubes
  • 1 x 6V / 2000mA Power Supply
Douk Audio NS-10P package contents and dimensions
Figure 2.1: Package contents and device dimensions (105mm/4.13in length, 69mm/2.72in width, 32mm/1.26in height).

3. Product Overview

3.1 Front Panel Controls

Douk Audio NS-10P front panel with Treble, Bass, and Volume knobs
Figure 3.1: Front Panel Controls
  • Treble Knob: Adjusts the high-frequency response.
  • Bass Knob: Adjusts the low-frequency response.
  • Volume Knob: Controls the overall output volume.

3.2 Rear Panel Ports

Douk Audio NS-10P rear panel with DC 6V IN, Power button, 3.5mm AUX In, and 3.5mm AUX Out ports
Figure 3.2: Rear Panel Ports and Connection Diagram
  • DC 6V IN: Power input port. Connect the supplied 6V power adapter here.
  • Power Button: Turns the unit on or off.
  • 3.5mm AUX Input (In): Connect your audio source (e.g., phone, tablet, CD player, computer).
  • 3.5mm AUX Output (Out): Connect to your power amplifier or active speakers.

4. Setup Instructions

Follow these steps for initial setup:

  1. Connect Output Device: Connect your power amplifier or active speakers to the 3.5mm AUX Output of the NS-10P using a high-quality audio cable.
  2. Connect Audio Source: Connect your audio source (e.g., phone, player, MP3, CD, DAC, computer) to the 3.5mm AUX Input of the NS-10P.
  3. Connect Power: Connect the supplied 6V power adapter to the DC 6V IN port on the NS-10P, then plug the adapter into a power outlet.
  4. Power On: Press the Power Button to turn on the unit. The tubes will glow.

Connection Flow: Audio Source → 3.5mm / RCA audio cable → NS-10P Preamplifier → 3.5mm / RCA audio cable → Amplifier / Active Speakers

5. Operation Instructions

  1. Play Music: Start playing audio from your connected source.
  2. Adjust Volume: Rotate the Volume Knob on the front panel to achieve your desired listening level.
  3. Adjust Tone: Use the Treble Knob and Bass Knob to fine-tune the high and low frequencies according to your preference.
  4. Power Off: After listening, press the Power Button to turn off the unit, and then disconnect the power adapter from the wall outlet.

6. Tube Replacement (Tube Rolling)

The NS-10P allows for tube replacement, also known as 'tube rolling', to customize the sound. The default 6J1 vacuum tubes can be directly replaced with the following compatible models:

  • 6J1
  • 6П1
  • 6AK5
  • 6BC5
  • 403A/B
  • 5654
  • EF40
  • EF95
  • CV850

Caution: Ensure the unit is powered off and disconnected from the power supply before attempting to replace tubes. Handle tubes carefully to avoid damage.

7. Specifications

Parameter Value
Model NS-10P
Brand Nobsound (Douk Audio)
Audio Input 3.5mm AUX
Audio Output 3.5mm AUX
Voltage Amplification 1.5 - 2.0 times
Tone Control Treble & Bass
Frequency Response 20Hz - 30kHz
THD (Total Harmonic Distortion) <0.005%
SNR (Signal-to-Noise Ratio) >110dB
Power Supply DC 6V/2A (5.5*2.5mm)
Dimensions (L*W*H) 105mm * 69mm * 32mm (65mm height with tubes)
Net Weight 205g

8. Troubleshooting (FAQ)

Q: Can the 3.5mm AUX output of the NS-10P be connected directly to headphones?
A: No. The NS-10P's 3.5mm output is designed for line-level signals to an amplifier or active speakers. It cannot drive headphones directly and requires a dedicated headphone amplifier (such as the Nobsound NS-08E) for headphone use.
Q: What is the operating voltage of the NS-10P?
A: The operating voltage of this product is 6V. Always use the supplied 6V/2A power adapter to ensure proper operation and safety.

9. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight.
  • Ensure proper ventilation around the unit to prevent overheating.
  • Disconnect the power supply when the unit is not in use for extended periods.

10. User Tips

  • For optimal sound quality, use high-quality audio cables for all connections.
  • Experiment with different compatible tubes (tube rolling) to find the sound signature that best suits your preferences.
  • Start with the volume knob at a low setting before playing audio to avoid sudden loud sounds.

11. Warranty & Support

For product support, warranty information, or any inquiries, please contact Douk Audio using the details below:

  • Website: www.doukaudio.com
  • Email: nobsound@doukaudio.com
  • WeChat/Whatsapp: +86-17704028602
  • Address: Room A304, Chunenghui, Digital Economy Industrial Base, No. 9, Baoye Road, Guanhu Street, Longhua District, Shenzhen, Guangdong, China

An official user manual in PDF format is also available for download: Douk Audio NS-10P User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.