1. Introduction
The MCHOSE ACE68 Pro is a high-performance wired mechanical keyboard designed for esports and gaming enthusiasts. Featuring magnetic switches, an 8K polling rate, and ultra-low latency, it offers precise and responsive input. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance.

Figure 1: MCHOSE ACE68 Pro Wired Mechanical Keyboard
2. Setup Guide
2.1 Package Contents
- MCHOSE ACE68 Pro Keyboard x1
- Data Line x1
- Corresponding Version of Spare Shaft Body x2
- Dual-purpose Key Dial Device x1
- Function Card x1
2.2 Connecting the Keyboard
- Connect the provided data line (USB cable) to the USB port on the MCHOSE ACE68 Pro keyboard.
- Plug the other end of the data line into an available USB port on your computer (Desktop, Laptop, or Tablet).
- The keyboard is a wired device and does not require batteries.
2.3 System Compatibility
The MCHOSE ACE68 Pro is compatible with both Windows and macOS operating systems.
2.4 Physical Adjustments
The keyboard features E-Sports foot support with a wider, bigger, and stronger two-section independent design for ergonomic comfort. Adjust the foot supports to your preferred typing angle.

Figure 2: E-Sports Foot Support
2.5 Software Installation (Web Driver)
To fully customize key parameters and lighting effects, download and install the MCHOSE self-developed web driver. This driver allows you to:
- Set key parameters for different game settings.
- Adjust hot keys and light effects.
- Save configurations to the keyboard's onboard memory.

Figure 3: MCHOSE Self-Developed Web Driver
3. Operating Instructions
3.1 Key Features
- Magnetic Switches: Equipped with a new generation magnetic switch algorithm for high-precision triggers.
- 8K Polling Rate: Ensures rapid communication between the keyboard and your computer.
- 0.1ms Ultra-Low Latency: Event-level ultra-low latency for immediate response.
- 128K Ultra-High Scan Rate: High-frequency scanning for accurate input detection.
- 0.01mm Trigger Accuracy: Achieve ultra-stable trigger response, especially in 'Berserk Mode'.

Figure 4: Performance Metrics (Latency, Scan Rate, Polling Rate)

Figure 5: 0.01mm Trigger Accuracy
3.2 Dynamic Trigger and Berserk Mode
The keyboard supports a dynamic trigger with an adjustable range of 0.1-3.4mm. The 'Black Tech Rampage Mode' (Berserk Mode) allows for high precision shaft body accuracy up to 0.01mm, providing an ultra-stable trigger response. This mode is designed for competitive gaming, enabling features like emergency stops and precise movement control.

Figure 6: Berserk Mode and Mixed Axis Play
3.3 Custom Dynamic Keys
The keyboard supports custom dynamic keys including SOCD, RS, DKS, MT, and TGL. These functions can be configured via the web driver to enhance your gaming experience with faster responses and specialized controls.

Figure 7: Custom Dynamic Keys
3.4 RGB Lighting Effects
Enjoy cool cyberlight effects with the built-in approximately 16 million color RGB lighting. The web driver allows for precise calculation and adjustment of light emitted by the lamp beads, offering various lighting effects to create your exclusive gaming atmosphere.

Figure 8: RGB Lighting Effects
3.5 Onboard Memory
The keyboard features onboard memory, allowing you to save your customized settings directly to the device. This means your configurations can be used without resetting, regardless of which computer the keyboard is connected to.

Figure 9: Onboard Memory Functionality
4. Maintenance
4.1 Cleaning
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe down the keycaps and chassis.
- For deeper cleaning between keys, use compressed air to remove dust and debris.
- Avoid spraying liquids directly onto the keyboard.
4.2 Keycap and Switch Care
The keyboard features durable PBT transparent keycaps, known for their resistance to wear and shine. The switches are hot-swappable, allowing for easy replacement or customization. Use the provided key dial device to carefully remove keycaps and switches if needed.

Figure 10: PBT Transparent Keycaps
5. Troubleshooting
5.1 Keyboard Not Responding
- Ensure the USB cable is securely connected to both the keyboard and the computer.
- Try connecting the keyboard to a different USB port on your computer.
- Restart your computer.
- If using a USB hub, try connecting the keyboard directly to the computer.
5.2 Keys Not Registering or Double-Typing
- Check if the hot-swappable switch for the affected key is properly seated. Gently remove the keycap and switch, then reinsert the switch firmly.
- Clean any debris around the affected switch.
- If the issue persists, consider replacing the switch with one of the spare shaft bodies provided.
5.3 Latency or Performance Issues
- Ensure the MCHOSE web driver is installed and up to date.
- Verify that the polling rate and scan rate settings in the driver are configured correctly for optimal performance (e.g., 8K polling rate, 32K scan rate).
- Close any unnecessary background applications that might be consuming system resources.
5.4 RGB Lighting Not Working
- Check the lighting settings in the MCHOSE web driver.
- Ensure the lighting is enabled and configured to your preference.
- If the issue persists, try reinstalling the web driver.
6. Specifications
The following specifications are based on the MCHOSE Ace60 Pro model, which shares core features with the ACE68 Pro.
| Feature | Specification |
|---|---|
| Product Name | MCHOSE Ace 68 |
| Model | ACE68 Pro (Ace 60 Pro equivalent) |
| Shaft Body (Switch Type) | TTC King Magnetic Axis SE version |
| Accuracy (Fury Mode) | True 0.01mm |
| RT Adjustment Range (Fury Mode) | 0.01-3.4mm |
| Global Trigger Stroke | 0.1-3.4mm |
| Delay | 0.125ms |
| Rate of Return | 8K |
| Chip | Customized high-frequency electronic competitive chip |
| Sensor | Custom Hall Sensor |
| Scan Rate | 32K |
| Dynamic Key Stroke | RS, SOCD, DKS, MT, TGL |
| Drive | MCHOSE Mai from the full-research web driver |
| Connection Mode | Wired connection |
| Key Cap | Original height PBT transparent keycap |
| Internal Fill | Aluminum alloy positioning plate, sandwich silicone base |
| Lamp Control Chip | Independent lamp control chip |
| Onboard Memory | Support |
| Keyboard Standard | 68 keys |
| Backlight Type | MULTICOLOR (RGB) |
| Interface Type | USB |
| Operation Style | Mechanical |
| Application | Desktop, Laptop, Tablet |
| Origin | Mainland China |
| Certification | CE |
Note: The data in the figures are all theoretical values, and there is a reasonable error in the actual measurement. Due to different production batches, some differences in product details are reasonable, and the final interpretation right belongs to MCHOSE.

Figure 11: Keyboard Internal Structure
7. User Tips
- Customize for Your Games: Utilize the MCHOSE web driver to create specific key profiles and lighting effects for different games. This can significantly enhance your performance and immersion.
- Experiment with Trigger Settings: The adjustable trigger stroke and 'Berserk Mode' offer a wide range of responsiveness. Experiment with these settings to find what feels most comfortable and effective for your playstyle.
- Keep it Clean: Regular cleaning of your keyboard, especially the keycaps and between switches, will help maintain its performance and longevity.
8. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or refer to the official MCHOSE website. Keep your purchase receipt as proof of purchase.