pinmany VWFA.20

Contents

Pinmany VWFA.20 CAN Bus Decoder Instruction Manual

Car OEM Radio CAN Bus Data Converter

1. Introduction

This manual provides comprehensive instructions for the installation, setup, and use of the Pinmany VWFA.20 CAN Bus Decoder. This device acts as a data converter for car OEM radios, enabling communication between your vehicle's CAN Bus system and an aftermarket Android head unit.

Important Notes:

  • The operating voltage range for this decoder is +9V to +16V. Using voltages outside this range can cause irreversible damage to the device.
  • The product features a 16-pin connector with a pin pitch of 2.0mm.
  • This CAN Bus decoder is supplied without cables. Proper wiring according to the pin function description is crucial. Incorrect wiring can damage the decoder. If you do not have suitable connection cables, it is recommended to purchase a compatible CAN Bus adapter with cables.

2. Specifications

FeatureDetail
Model NameVWFA.20
Brand Namepinmany
ManufacturerHiworld
Special FeaturesCAN Bus Data Converter
Item TypeCables, Adapters & Sockets
Voltage12 V
InterfacePH2.0-16pin
Item Size (L x W x H)55mm x 45mm x 17mm (Manual measurement, error ±1mm)
Item Weight35g
MaterialBlack plastic shell
OriginMainland China
High-concerned chemicalNone
CAN Bus Box Product View
Figure 2.1: CAN Bus Box Product View. This image shows the physical appearance of the CAN Bus Decoder.
Product Information and Dimensions
Figure 2.2: Product Information and Dimensions. This image details the model, name, brand, manufacturer, size, interface, and weight of the CAN Bus Box, along with a list of suitable vehicle models.
Pre-Purchase Compatibility Check Diagram
Figure 2.3: Pre-Purchase Compatibility Check. This diagram illustrates key checks before purchase, including verifying harness connectors, 16-pin connector type, pin definitions, and the 8-pin UART interface on the Android head unit.
16-pin Connector Pin Definition Diagram
Figure 2.4: 16-pin Connector Pin Definition. This image provides a detailed pinout for the 16-pin connector, including GND, BATT, CAN-H, CAN-L, ILL-OUT, ACC-OUT, PARK-OUT, REV-OUT, NC, UART-RX, and UART-TX.

3. Compatibility

3.1. Compatible Android Head Units

This CAN Bus decoder is designed to be adapted to 7, 8, 9, and 10-inch Android Head Units.

Compatible Android Head Unit Sizes
Figure 3.1: Compatible Android Head Unit Sizes. This image displays examples of 7, 8, 9, and 10-inch Android head units that are compatible with the CAN Bus decoder.

3.2. Suitable Vehicle Models (For All PQ and MQB Platforms)

The VWFA.20 CAN Bus Decoder is compatible with various Volkswagen, Skoda, and Seat models. Please verify your specific car model and year against the lists below:

Volkswagen:

  • Cross Lavida 2013-2017
  • Gran Lavida 2013-2017
  • Lavida 2011-Present
  • Lavida Plus 2018-Present
  • Passat B5, B5.5 2000-2011
  • Passat NMS 2012-2014
  • Passat B6 2007-2011
  • Passat B7 2011-Present
  • Passat CC B6 2009-2011
  • Passat CC B7 2011-2018
  • Passat CC 2019-Present
  • Golf/GTI/R32/Rabbit 2003-2008
  • Golf6 2008-2013
  • Golf7 2013-Present
  • Sportsvan 2016-Present
  • Golf Plus 2003-2014
  • Golf GTI 2013-Present
  • Polo 2010-Present
  • Tiguan 2007-2017
  • Tiguan L 2016-Present
  • Tiguan X 2021-Present
  • Lamando 2015-2021
  • Santana 2013-Present
  • Touran 2010-Present
  • Teramont 2017-Present
  • Teramont X 2019-Present
  • Scirocco 2008-2017
  • Bora 2013-Present
  • Jetta/Sagitar 2006-Present
  • Jetta SportWagen 2007-2013
  • Jetta VS5 2019-Present
  • Jetta VS7 2020-Present
  • Caddy 2010-Present
  • Sharan 2010-Present
  • Beetle 2012-2019
  • Variant 2016-Present
  • Multivan 2009-Present
  • Caravan 2009-Present
  • EOS 2006-Present
  • Up! 2011-2021
  • Fox 2011-2019
  • CrossFox 2011-2019
  • Voyage 2008-2021
  • Saveiro 2008-2021
  • Vento 2010-2022
  • Tharu 2018-Present
  • Tayron 2018-Present
  • GTE Tayron GTE 2020-Present
  • Tacqua 2020-Present
  • C-TREK 2017-Present
  • T-Roc 2018-Present
  • T-Cross 2018-Present
  • Virtus 2018-Present, Gen6
  • Phideon 2016-Present
  • Viloran 2020-Present
  • Talagon 2021-Present
  • Tavendor 2022-Present
  • Amarok 2010-Present
  • Arteon 2017-Present
  • Ameo 2022-Present
  • Taigun 2021-Present
  • Nivus (Latin America) 2020-Present
  • Taigo(EU) 2021-Present
  • Taos 2020-Present
  • Atlas 2017-Present

Skoda:

  • Citigo 2011-2020
  • Yeti 2009-2013
  • Laura 2010-2014
  • Praktik 2010-2015
  • Roomster 2010-2015
  • Fabia II 2008-2017
  • Fabia III 2015-Present
  • Octavia II 2002-2013
  • Octavia III 2013-Present
  • Rapid Spaceback 2012-Present
  • Rapid 2012-Present
  • Superb II 2008-2015
  • Superb III 2016-Present
  • Kodiaq 2017-Present
  • Kodiaq GT 2019-Present
  • Kamiq 2018-Present
  • Karoq 2018-Present
  • Slavia 2022-Present
  • Ateca 2020-Present
  • Scala 2019-Present
  • Kushaq 2021-Present

Seat:

  • Altea 2010-2015
  • Altea XL 2010-2015
  • Ibiza 2008-Present
  • Leon 2005-Present
  • Toledo 2012-2019
  • Alhambra 2010-2020
  • Mii 2011-2021
  • Arona 2017-Present
  • Ateca 2016-Present
  • Tarraco 2018-Present
Suitable Vehicle Models Part 1
Figure 3.2: Suitable Vehicle Models (Part 1). This image lists compatible Volkswagen models and their respective year ranges.
Suitable Vehicle Models Part 2
Figure 3.3: Suitable Vehicle Models (Part 2). This image lists compatible Volkswagen, Skoda, and Seat models and their respective year ranges.

4. Installation and Setup

Before proceeding with installation, ensure your vehicle and Android head unit are compatible as detailed in Section 3. Auto parts can be complex; if you are unsure about fitting, please contact support before purchase.

4.1. Pre-Installation Checks

  • Verify that your vehicle's wiring harness has the necessary connectors for the CAN Bus decoder.
  • Confirm that your existing 16-pin cable connectors are identical to those required by the decoder (pin spacing 2.0mm).
  • Cross-reference the pin definitions of your vehicle's connector with the provided 16-pin connector definition (Figure 2.4) to ensure consistency.
  • Check if your Android head unit has the required 8-pin connector interface for UART communication.

4.2. Step-by-Step Installation

Step 1: Connection of Cable Adapter

Locate the 16-pin CAN plug of your vehicle's wiring harness. Connect this plug securely into the 16-pin socket of the CAN Bus Box. Ensure all pins align correctly to prevent damage.

Step 1: Cable Adapter Connection
Figure 4.1: Cable Adapter Connection. This image shows how to connect the 16-pin CAN plug from the wiring harness to the CAN Bus Box.

Step 2: Set up CAN on Android Head Unit

The exact steps for setting up the CAN Bus on your Android head unit may vary depending on the head unit's manufacturer and software version. The following instructions demonstrate a common method. If these steps do not match your head unit, please consult your head unit vendor or manual.

  1. Enter Settings: Navigate to the main settings menu on your Android head unit. Look for "Car Settings" or a similar option.
  2. Enter Factory Settings: Within "Car Settings," find and select "Factory" or "Factory Settings." You may be prompted for a password. Common passwords include: 3368, 1617, 8317, 8888. If these do not work, consult the seller of your Android radio for the correct password.
  3. Enter CAN Bus Settings: Once in the factory settings, locate and select "CAN Bus Setting" or "CAN Related Settings."
Step 2: Android Head Unit CAN Bus Setup Part 1
Figure 4.2: Android Head Unit CAN Bus Setup (Part 1). This image illustrates navigating through the Android head unit's settings to access Car Settings, Factory settings, and entering a factory password.

Step 3: Select CAN Bus Box Manufacturer & Car Model

Within the CAN Bus settings:

  1. Select Manufacturer: Choose "Hiworld" as the CAN Bus Box manufacturer.
  2. Select Car Model: From the list, select your specific car model and year. Examples include:
    • VW-SKODA_W01 (for Lavida, Polo, Passat, Touareg)
    • VW-SKODA_W02 (for Golf, Octavia, Bora)
    • VW-SKODA_W03 (for Superb)
    • VW-SKODA_W04 (for TiguanL)
    • VW-SKODA_W05 (for Lavida)
    • VW-SKODA_W06 (for Touareg)
    • VW-SKODA_W07 (for Seat Altea, Ibiza, Leon)
  3. Save and Reboot: After selecting the correct options, save your settings and reboot the Android head unit for changes to take effect.
Step 3: Android Head Unit CAN Bus Setup Part 2
Figure 4.3: Android Head Unit CAN Bus Setup (Part 2). This image demonstrates selecting the CAN Bus Box manufacturer (Hiworld) and the specific car model from a list within the Android head unit's settings.

5. Maintenance

The Pinmany VWFA.20 CAN Bus Decoder requires minimal maintenance. To ensure its longevity and optimal performance:

  • Keep the device dry and away from moisture.
  • Avoid exposing the device to extreme temperatures (very hot or very cold).
  • Ensure all connections remain secure and free from corrosion.
  • Do not attempt to open or modify the device, as this will void any potential warranty and may cause damage.

6. Troubleshooting

If you encounter issues with your CAN Bus Decoder, consider the following common problems and solutions:

  • No Functionality / Device Damage:
    • Verify that the operating voltage supplied to the decoder is within the specified range of +9V to +16V. Voltages outside this range can cause damage.
    • Double-check all wiring connections. Improper wiring is a common cause of malfunction or damage. Refer to Figure 2.4 for correct pin definitions.
  • CAN Bus Settings Not Accessible or Incorrect:
    • If the factory password for your Android head unit is unknown or the provided passwords (3368, 1617, 8317, 8888) do not work, contact the seller or manufacturer of your Android radio for assistance.
    • Ensure you have selected "Hiworld" as the CAN Bus Box manufacturer and the correct car model and year in the Android head unit settings.
  • Compatibility Issues:
    • Confirm that your vehicle model and year are listed in the compatible vehicles section (Section 3.2).
    • Ensure your Android head unit is one of the supported sizes (7, 8, 9, or 10 inches) and has the correct 8-pin UART interface.

7. User Tips

  • Verify Compatibility Thoroughly: Before purchasing or installing, always double-check that the decoder is compatible with your specific car model, year, and Android head unit. Pay close attention to connector types and pin configurations.
  • Wiring Harness: The CAN Bus decoder does not come with cables. Ensure you have a suitable 16-pin wiring harness. If your head unit requires a different connector (e.g., 4-pin for CANbus), you may need an additional adapter cable, which is not included.
  • Consult Head Unit Vendor: If you encounter difficulties with the Android head unit's settings, especially regarding factory passwords or specific CAN Bus configurations, the head unit's vendor is the primary resource for support.
  • Professional Installation: Given the complexity of auto parts and wiring, if you are uncertain about any step of the installation, consider seeking professional assistance to avoid damage to the decoder or your vehicle's electrical system.

8. Warranty and Support

As a manufacturer with a professional design team, Pinmany is committed to providing quality products. For any questions regarding the product, including technical support or specific requirements, please contact the seller directly. We aim to resolve any issues to your satisfaction.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.