1. Introduction
The Cherub GT-6 is a versatile 3-band EQ acoustic guitar preamp designed to enhance your instrument's sound. It features a built-in highly accurate chromatic tuner and a range of effects including reverb, delay, chorus, and wide. Its compact size allows for easy integration into most acoustic guitars. The unit also includes a low battery indicator to ensure uninterrupted performance.

2. Features
- Tone and volume control.
- Integrated phase and tuner function.
- Built-in reverb, delay, chorus, and wide effects.
- 3-band equalizer (Low, Middle, High) for precise tone shaping.
- Dedicated knobs for adjusting reverb/delay and chorus/wide effects.
- Wide frequency response range from 20 Hz to 20 kHz.
- LED indicator for effect on/off status and battery check.
- Compact design for easy installation.

3. Specifications
| Feature | Specification |
|---|---|
| Functions | 3 Band EQ, Chromatic Tuner, Phase, Reverb, Delay, Chorus, Wide Effects |
| Input Impedance | 10MΩ |
| Frequency Response | 20Hz-20KHz |
| Control Range (Low) | +/-12dB at 100Hz |
| Control Range (Middle) | +/-12dB at 800Hz |
| Control Range (High) | +/-12dB at 3KHz |
| Low Battery Check | LED indicator |
| Battery Life | Over 20 hours |
| Power Supply | 9V Alkaline Battery (not included) |
| Pick-up | Piezo ceramic pick-up |
| Output Jack | 6.35mm |
| Dimension (W * L) | 5.2 * 5.4cm / 2.05 * 2.13in (Visible portion) |
| Item Weight | 108g / 3.81oz |
| Package Size (L * W * H) | 15.2 * 8.2 * 4.3cm / 5.99 * 3.23 * 1.69in |
| Package Weight | 228g / 8.05oz |
4. Package Contents
The package includes the following items:
- 1 x Cherub GT-6 3-Band EQ Equalizer Preamp Unit
- 1 x Piezo Ceramic Pick-up
- 1 x Battery Box
- Wiring accessories
- User Manual (this document)

5. Setup and Installation
5.1. Preamp Installation
The Cherub GT-6 preamp is designed for onboard installation in acoustic guitars. Due to its compact size (visible portion 5.2cm x 5.4cm), it can be integrated discreetly. Professional installation is recommended to ensure proper fit and wiring within your instrument. Ensure the piezo ceramic pick-up is correctly positioned for optimal sound capture.
5.2. Battery Installation
The unit is powered by a 9V Alkaline battery (not included). Locate the battery box and insert a fresh 9V battery, observing the correct polarity. The "BATT." LED indicator will illuminate when the battery level is low, signaling that a replacement is needed.
5.3. Power Adapter (Optional)
If using an external power adapter (not included), ensure it has a positive pole outside and a negative pole inside. Using an adapter with incorrect polarity may damage the unit or prevent it from functioning correctly.
6. Operating Instructions
6.1. Controls Overview

- VOL. Knob: Adjusts the overall output volume of the preamp.
- LOW Knob: Adjusts the bass frequency (+/-12dB at 100Hz).
- MIDDLE Knob: Adjusts the mid-range frequency (+/-12dB at 800Hz).
- HIGH Knob: Adjusts the treble frequency (+/-12dB at 3KHz).
- PHASE Button: Engages or disengages the phase inversion function, useful for feedback reduction.
- REVERB/DELAY Knob: Adjusts the intensity of the reverb and delay effects.
- CHORUS/WIDE Knob: Adjusts the intensity of the chorus and wide effects.
- TUNER Button: Activates the built-in chromatic tuner.
- BATT. LED: Indicates low battery status.
6.2. Using the Tuner
Press the "TUNER" button to activate the chromatic tuner. The LCD display will show the note being played and indicate whether it is sharp, flat, or in tune. Tune your guitar strings until the display shows the correct note and the indicator is centered. Press the "TUNER" button again to exit tuner mode.

6.3. Applying Effects
The GT-6 includes four built-in effects: reverb, delay, chorus, and wide. Use the dedicated "REVERB/DELAY" and "CHORUS/WIDE" knobs to adjust the intensity of these effects to your preference. Rotate the knobs clockwise to increase the effect level.
7. Maintenance
- Keep the unit clean by wiping it with a soft, dry cloth.
- Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight.
- Do not use abrasive cleaners or solvents.
- If the unit will not be used for an extended period, remove the 9V battery to prevent leakage.
8. Troubleshooting
- No Sound/Weak Sound:
- Check the 9V battery. If the "BATT." LED is on, replace the battery.
- Ensure all cables (pickup, output) are securely connected.
- Verify the VOL. knob is turned up.
- Unit Not Powering On:
- Check the 9V battery. Replace if necessary.
- If using an external power adapter, ensure it has the correct polarity (positive pole outside, negative pole inside).
- Excessive Feedback:
- Engage the PHASE button to invert the signal phase.
- Adjust the EQ settings (Low, Middle, High) to reduce problematic frequencies.
- Reduce the overall volume.
9. User Tips
Based on available user feedback, no specific tips beyond the general operating instructions were provided. Always refer to the operating instructions for optimal use.
10. Warranty and Support
For warranty information and technical support, please refer to the manufacturer's official website or contact your retailer. Keep your proof of purchase for any warranty claims.