Introduction
This manual provides instructions for the safe and efficient use of the USB Charging Wire designed for 4DRC V2 Mini Drone lithium batteries. This product is a charging cable and is not a battery itself. It is intended for charging compatible lithium batteries for the 4DRC V2 Mini Drone 4D-V2 Quadcopter.
Figure 1: Single USB Charging Wire
Figure 2: Two USB Charging Wires (Example of multiple units)
Setup
- Identify Components: Ensure you have the USB charging wire and a compatible 4DRC V2 Mini Drone lithium battery.
- Power Source: Connect the USB end of the charging wire to a standard USB power source (e.g., computer USB port, USB wall adapter, power bank). Ensure the power source provides stable 5V output.
- Battery Connection: Carefully connect the battery connector of the charging wire to the corresponding port on your 4DRC V2 Mini Drone lithium battery. Ensure the connection is firm and secure.
- Indicator: Observe the charging indicator (if present on your battery or charger). Typically, a red light indicates charging, and it may turn green or off when fully charged.
Operating Instructions
- Once the battery is connected to the charging wire and the USB end is plugged into a power source, the charging process will begin automatically.
- Monitor the charging indicator. Do not leave batteries unattended while charging.
- Charging times may vary depending on the battery capacity and the output of your USB power source. Refer to your drone's battery specifications for estimated charging durations.
- Once the battery is fully charged (indicated by the light changing or turning off), disconnect the battery from the charging wire and then unplug the USB charging wire from the power source.
Maintenance
- Cleaning: Keep the charging wire and connectors clean and free from dust or debris. Use a dry, soft cloth for cleaning. Do not use liquids.
- Storage: Store the charging wire in a cool, dry place away from direct sunlight and moisture when not in use. Avoid bending or kinking the cable excessively.
- Handling: Always grasp the connectors when plugging or unplugging, rather than pulling on the cable itself, to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Loose connection, faulty power source, damaged cable/battery. | Ensure all connections are secure. Try a different USB power source. Inspect the cable and battery for visible damage. |
| Slow charging | Low output from USB power source. | Use a USB power source with higher current output (e.g., a dedicated wall adapter instead of a computer port). |
| Charging indicator not working | Faulty indicator on battery or charger, or no power. | Verify power is supplied to the charger. If the battery still charges, the indicator might be faulty. |
Specifications
- Model Number: V2 4D-V2
- Brand Name (Charging Wire): TOMYEA
- Material: Composite Material
- RC Parts & Accs: Connectors/Wiring
- Remote Control Peripherals/Devices: Battery Charging Units
- Upgrade Parts/Accessories: Lithium Battery (for which this charger is used)
- For Vehicle Type: Helicopters (referring to the drone)
- Is Electric: No battery (clarifies the product is a charger, not a battery)
- Origin: Mainland China
- Recommend Age: 6-12Y, 14+y (referring to the drone's recommended age)
User Tips
- Product Clarification: This product is a charging cable, not a battery. Ensure you have the correct lithium battery for your 4DRC V2 Mini Drone.
- Quality Assurance: Users have reported excellent quality and secure packaging, indicating a reliable product.
Warranty and Support
For any issues, questions, or support regarding this product, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims if applicable.