NEWBOLER BAG220 10L Waterproof Bicycle Fork Bag User Manual

1. Introduction

Thank you for choosing the NEWBOLER BAG220 10L Waterproof Bicycle Fork Bag. This versatile and durable bag is designed to provide secure and dry storage for your essentials during various cycling activities. Featuring a quick-release mounting system and a fully waterproof construction, it's an ideal companion for your adventures. Please read this manual carefully before installation and use to ensure optimal performance and safety.

2. Safety Warnings

• Ensure the bag is securely attached to the bicycle fork or tube before riding. A loose bag can interfere with steering or wheels, leading to accidents.
• Do not overload the bag beyond its recommended capacity (10L). Overloading can affect bicycle stability and damage the bag or mounting system.
• Regularly check all screws and clamps for tightness, especially after initial installation and before each ride.
• Distribute weight evenly within the bag to maintain bicycle balance.
• Be aware of the increased width or weight of your bicycle when the bag is attached, especially in narrow spaces or when maneuvering.
• Keep the bag's roll closure properly rolled and secured to maintain its waterproof integrity.

3. Package Contents

Please verify that all the following components are included in your package:

1. Bag (10L Waterproof)
2. Puttee (Adjustable band-clamps, 3 pieces)
3. Front fork bracket
4. Shoulder harness
5. Screw gasket (for metal screws)
6. Metal Screws (for bracket attachment)
7. Plastic screws (for bracket attachment)
8. Screw Plate Handle
9. Strap-on accessories

4. Installation Guide

The NEWBOLER BAG220 features a quick-lock system for easy attachment and removal. Follow these steps for secure installation:

4.1. Front Fork Bracket Installation

The bracket can be installed using either the 3-point adjustable band-clamps or directly to M5 screw holes on your fork (if available).

1. Prepare the Fork: If your fork has existing screws for accessories, unscrew them.
2. Position the Bracket: Take out the front fork bracket and align it with the desired position on your bicycle fork. Ensure it does not interfere with wheel movement or braking.
3. Attach Band-Clamps (if applicable): If using band-clamps (Puttee), thread them through the bracket slots.
4. Insert Screws: Insert the appropriate screws (metal or plastic, depending on your fork and preference) into the bracket and through the band-clamps (if used).
5. Initial Tightening: Hand-tighten the screws to hold the bracket in place.
6. Final Tightening: Systematically tighten all screws firmly. Ensure the bracket is stable and does not move. If using band-clamps, ensure they are snug around the fork.
7. Check Stability: Gently try to move the bracket to confirm it is securely fastened.

4.2. Bag Attachment

1. Align the quick-lock system on the back of the bag with the installed front fork bracket.
2. Push the bag downwards onto the bracket until you hear a distinct 'click'. This indicates the bag has snapped into place and is securely locked.
3. Gently pull upwards on the bag to confirm it is firmly attached and does not lift off the bracket easily.

5. Operation

5.1. Quick Release and Disassembly

To remove the bag from the bracket:

1. Locate the release lever on the quick-lock system (refer to Figure 3).
2. Move the release lever to unlock the bag.
3. Pull the bag upwards to detach it from the front fork bracket.

5.2. Using as a Shoulder Bag

The supplied shoulder harness can be attached to the D-rings on both sides of the bag, allowing it to be used as a convenient shoulder bag when off the bike.

5.3. Internal Storage

The 10L capacity provides ample space for clothes, mobile phones, pumps, glasses, and other carry-on items. Internal compartment pockets help with sorting and easy access to your gear.

5.4. Bike Compatibility

The BAG220 is compatible with a wide range of bicycles, including Mountain Bikes, Off-Road/Road Bikes, E-Scooters, and Touring Bikes, thanks to its adjustable 3-point fixing system.

6. Maintenance

6.1. Waterproofing

The bag is made from 100% waterproof PVC material. To ensure maximum waterproofing, always ensure the roll closure is properly rolled down and secured. This prevents water ingress during rain or splashes.

6.2. Cleaning

To clean the bag, wipe it with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners, as these can damage the PVC material. Allow the bag to air dry completely before storage.

6.3. Storage

Store the bag in a cool, dry place away from direct sunlight when not in use. Avoid folding or creasing the bag excessively to prolong its lifespan.

7. Troubleshooting

Bag feels loose after installation:

Recheck all screws and band-clamps on the front fork bracket. Ensure they are tightened securely. For the bag itself, ensure it has clicked firmly into the quick-release mechanism.

Water inside the bag after rain:

Verify that the roll closure was properly rolled down and secured. The bag is 100% waterproof when sealed correctly. Check for any visible damage or punctures to the PVC material.

Difficulty attaching/detaching the bag:

Ensure the quick-release mechanism is clean and free of debris. Apply a small amount of silicone lubricant if necessary, but avoid oil-based lubricants that can attract dirt.

8. Specifications

9. User Tips

• Verify Dimensions: While the bag is rated at 10L, it's always a good idea to visually confirm its size and capacity against your specific needs.
• Ease of Installation: Users frequently praise the straightforward installation process. Take your time during the initial setup to ensure all components are correctly and securely fastened.
• Waterproof Confidence: The bag's material is highly waterproof. For best results, ensure the roll-top closure is tightly sealed to protect contents from rain and splashes.
• Versatile Use: Don't forget to utilize the included shoulder strap for convenient carrying when you're off your bike.

10. Warranty & Support

For any questions, technical support, or warranty claims regarding your NEWBOLER BAG220, please contact the seller or refer to the official NEWBOLER website. Keep your purchase receipt as proof of purchase.

An additional user manual in PDF format may be available for download. Please check the product page or contact customer support for access to the User Manual (PDF).