1. Introduction
Welcome to the world of Keeppley Pokemon Potted Building Block Figures! These sets allow you to construct detailed mini brick figures of your favorite Pokemon characters, including Pikachu, Charmander, Squirtle, Bulbasaur, and Jigglypuff, each nestled in a charming plant pot design. Made from high-quality, environmentally friendly ABS plastic, these building blocks offer an engaging and creative experience for enthusiasts and collectors alike. This manual provides essential information for assembly, care, and safe use of your Keeppley building block figures.

2. Safety Information
- Recommended Age: This product is suitable for individuals aged 8 years and older. It is not intended for young children due to small parts that may pose a choking hazard.
- Choking Hazard: The building blocks are small and must not be eaten or put into the mouth. Keep all parts away from infants and young children.
- Material Safety: The blocks are made from ABS safety and environmental protection materials.
- California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Product Overview
Each Keeppley Pokemon Potted Building Block set allows you to assemble a beloved Pokemon character within a decorative plant pot. The sets are designed with self-locking bricks, compatible with other small building block systems.
3.1 Available Models
- K20217: Pikachu Potted Figure
- K20218: Charmander Potted Figure
- K20219: Squirtle Potted Figure
- K20220: Bulbasaur/Cactus Potted Figure
- K20221: Jigglypuff Potted Figure
3.2 Components
Each set typically includes:
- Assorted ABS plastic building blocks
- Instruction booklet (specific to the model)
- Packaging box (optional, some variants may come without a box)






4. Setup Instructions
The setup process involves assembling the building blocks according to the provided instructions for your specific model.
- Unpack: Carefully open the packaging and remove all building blocks and the instruction booklet.
- Sort: For easier assembly, sort the blocks by color, size, or type as suggested in the instruction booklet.
- Follow Instructions: Refer to the detailed step-by-step instructions provided in the booklet specific to your Pokemon model. Each step will illustrate which blocks to use and where to place them.
- Connect: Firmly press the blocks together to ensure a secure connection.
- Verify: After completing each major section, compare your progress with the images in the instruction booklet to ensure accuracy.
Retain the instruction booklet for future reference or if you need to reassemble parts.
5. Operating Instructions
Once assembled, your Keeppley Pokemon Potted Building Block Figure is ready for display and gentle interaction.
- Display: Place your assembled figure on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to preserve its colors and structural integrity.
- Interaction: While designed for assembly and display, the figures can be gently handled. Avoid excessive force or dropping, as this may cause blocks to detach or break.
- Creative Play: These blocks are compatible with other small building block systems, allowing for creative expansion and integration into larger block creations.
6. Maintenance
Proper care will help maintain the appearance and longevity of your building block figures.
- Cleaning: To clean, gently wipe the assembled figure with a soft, dry cloth. For more stubborn dust or grime, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: If disassembling for storage, keep all blocks in a sealed container to prevent loss and protect them from dust and damage.
7. Troubleshooting
7.1 Missing Pieces
If you find that you are missing any pieces, please double-check the packaging and surrounding area. Sometimes small pieces can get stuck or overlooked. If pieces are still missing, contact the seller for assistance.
7.2 Difficulty Assembling
Ensure you are following the instruction booklet step-by-step. Sometimes a small error in an earlier step can affect later assembly. Disassemble the problematic section and re-follow the instructions carefully. Ensure blocks are firmly pressed together.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | MINISO (Keeppley) |
| Model Numbers | K20217, K20218, K20219, K20220, K20221 |
| Material | ABS Plastic (Environmental safety ABS) |
| Plastic Block Shape | Self-Locking Bricks |
| Block Size | Small building block (Compatible with Lego) |
| Recommended Age | 14+y (also stated as 8+ in product description) |
| Gender | Unisex |
| Origin | Mainland China |
| Certification | CE |
| Certificate Number | HTT202304321LR |
| Is Electric | No Battery |
| Warning | Can not eat |
| Package Length | 18 cm |
| Package Width | 18 cm |
| Package Height | 7 cm |
| Package Weight | 0.25 kg |
9. User Tips
- Organize Your Bricks: Before starting assembly, sort your bricks by color and shape. This can significantly speed up the building process and reduce frustration.
- Take Your Time: Building block sets are meant to be enjoyed. Don't rush the assembly; take your time to appreciate the design and construction.
- Display Creatively: Once assembled, these potted figures make excellent decorative pieces. Consider arranging them together or integrating them into a larger display.
10. Warranty and Support
For any issues regarding missing parts, defective components, or general inquiries, please contact the seller directly through the platform where the product was purchased. Provide your order details and a clear description of the issue for prompt assistance.
11. Compliance
This product complies with CE certification standards. Please refer to the safety information section for important warnings, including the California Proposition 65 disclosure.