ATK V100 Pro Mechanical Keyboard User Manual

1. Introduction

The ATK V100 Pro is a high-performance mechanical keyboard designed for gaming and professional use. It features a semi-aluminum alloy construction, gasket structure, and tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth). With full key hot-swap capability and customizable RGB lighting, it offers a personalized and responsive typing experience.

Figure 1: ATK V100 Pro Mechanical Keyboard

2. Package Contents

Please check the package contents upon unboxing:

• ATK V100 Pro Mechanical Keyboard
• USB-C to USB-A Cable (for wired connection and charging)
• 2.4G Wireless Receiver
• Keycap Puller (may vary by package)
• Switch Puller (may vary by package)
• User Manual (this document)

3. Setup

3.1 System Requirements

• Operating System: Windows, MacOS
• Available USB port (for wired connection or 2.4G receiver)
• Bluetooth-enabled device (for Bluetooth connection)

3.2 Connecting the Keyboard

The ATK V100 Pro supports three connection modes: Wired, 2.4G Wireless, and Bluetooth.

Figure 2: Three-mode connection options

3.2.1 Wired Connection

1. Locate the USB-C port on the keyboard.
2. Connect the provided USB-C cable to the keyboard and the USB-A end to an available USB port on your computer.
3. The keyboard will be automatically recognized by your system.

3.2.2 2.4G Wireless Connection

1. Locate the 2.4G wireless receiver.
2. Plug the 2.4G receiver into an available USB port on your computer.
3. Switch the keyboard's mode selector to 2.4G wireless mode (refer to the keyboard's physical switch or function key combination).
4. The keyboard should connect automatically.

3.2.3 Bluetooth Connection

1. Switch the keyboard's mode selector to Bluetooth mode (refer to the keyboard's physical switch or function key combination).
2. On your computer or device, open Bluetooth settings and search for new devices.
3. Select "ATK V100 Pro" (or similar name) from the list of available devices to pair.
4. Follow any on-screen prompts to complete the pairing process.

3.3 Software Installation (ATK HUB)

For advanced customization, including key remapping, macro settings, and lighting effects, download the ATK HUB software.

• Visit the official ATK website: ATK.PRO
• Navigate to the support or downloads section to find the ATK HUB software for your operating system.
• Install the software following the on-screen instructions.

Figure 3: ATK HUB Software Interface

4. Operating Instructions

4.1 Basic Keyboard Functions

• Typing: Standard QWERTY layout for general typing.
• Function Keys: Use the Fn key in combination with F1-F12 for multimedia controls or other specific functions (refer to keyboard legends).
• Numeric Keypad: The keyboard features a 100-key layout, including a numeric keypad for data entry.

4.2 Backlight Control (RGB)

The ATK V100 Pro features 16 million color RGB lighting with lower lamp position for enhanced aesthetics. Lighting effects can be controlled via function key combinations or the ATK HUB software.

Figure 4: ARGB Lamp Bead Technology

Specific key combinations for lighting control may vary. Consult the ATK HUB software for full customization options.

4.3 Battery Management

The ATK V100 Pro is equipped with an 8000mAh battery for long endurance in wireless modes.

Figure 5: 8000mAh Battery Capacity

• Charging: Connect the keyboard via the USB-C cable to a powered USB port. The keyboard will charge automatically.
• Battery Indicator: The keyboard may have an LED indicator to show battery status (e.g., low battery, charging, fully charged). Refer to the product's quick start guide for specific indicator behavior.
• Power Saving: The keyboard may enter a sleep mode after a period of inactivity to conserve battery. Press any key to wake it up.

4.4 Ergonomics

The keyboard features an ergonomic design with two-stage foot support to reduce office load and typing fatigue.

Figure 6: Ergonomic Design with Two-Stage Foot Support

5. Maintenance

5.1 Cleaning the Keyboard

• Disconnect the keyboard from all power sources and devices before cleaning.
• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
• For deeper cleaning, use a keycap puller to remove keycaps and a brush or compressed air to clean dust and debris from underneath.
• Do not immerse the keyboard in water or use harsh chemicals.

5.2 Hot-Swap Switch Replacement

The ATK V100 Pro features full key hot-swap sockets, allowing you to change switches without soldering.

Figure 7: Full Key Hot-Swap Feature

1. Using a keycap puller, gently remove the desired keycap.
2. Using a switch puller, carefully grip the top and bottom clips of the switch and pull it straight up.
3. Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight to avoid bending.
4. Gently push the new switch into place until it clicks securely.
5. Replace the keycap.

Caution: Apply even pressure when inserting switches. Bent pins can damage the switch socket.

6. Troubleshooting

• Keyboard not responding: Check the connection mode (wired, 2.4G, Bluetooth) and ensure it matches your device. For wireless modes, check battery level. Try reconnecting the cable or re-pairing Bluetooth.
• Keys not registering: Ensure the switches are properly seated. If a specific key is not working, try replacing its switch.
• Backlight issues: Check lighting settings in ATK HUB software. Ensure the keyboard is not in a power-saving mode that disables lighting.
• 2.4G Wireless connection unstable: Ensure the receiver is not obstructed and is within range. Avoid interference from other wireless devices.
• Bluetooth pairing issues: Ensure the keyboard is in Bluetooth pairing mode. Remove previous pairings from your device and try pairing again.

For further assistance, visit the official ATK support website at ATK.PRO.

Figure 8: ATK.PRO for Drivers and Support

7. Specifications

Figure 9: Model Comparison (V100 vs V100 Pro)

7.1 Switch Specifications

The ATK V100 Pro is available with various switch types:

Figure 10: Aniya Switch Specifications

Figure 11: Dream Fei Switch Specifications

Figure 12: Blueberry Ice Cream Switch Specifications