1. Introduction
Thank you for choosing the Baofeng UV-K61 Pro Walkie Talkie. This device is a multi-band handheld transceiver designed for reliable communication across various frequency ranges. It features a 1.54-inch TFT large screen, wireless frequency copying, multiple charging options, and advanced signaling capabilities. This manual provides essential information for the safe and efficient operation of your new walkie talkie.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1x Radio Unit
- 1x Battery
- 1x Antenna
- 1x User Manual
- 1x Lanyard
- 1x Belt Clip
- 1x Base Charger
- 1x Type-C Cable (for direct charging)
Figure 2.1: Standard Package Contents
3. Product Overview
Familiarize yourself with the parts of your UV-K61 Pro Walkie Talkie:
Figure 3.1: UV-K61 Pro Parts Diagram
- Antenna
- LED Flashlight
- Power/Volume knob
- Status LED (TX/RX LED)
- LCD Screen (1.54" TFT Large Screen)
- V/M Key (VFO/MR MODE KEY)
- A/B Select Key
- SWEEP Key
- MENU Key
- Key Pad
- Speaker
- Up Key
- Down Key
- EXIT Key
- Unlock Key
- Accessory Jack
- PTT Key (Push-to-Talk)
- Monitor Key
- FM Key
- Back Clip
- Type-C Charging Indicator
- Type-C Charging Port
4. Setup
4.1 Battery Installation
- Align the battery with the battery compartment on the back of the radio.
- Slide the battery into place until it clicks securely.
- To remove, press the release latch (if present) and slide the battery off.
4.2 Charging the Battery
The UV-K61 Pro supports two charging methods: Type-C direct charging and base charging.
- Type-C Direct Charging: Connect the provided Type-C cable to the Type-C Charging Port (22) on the radio and to a compatible USB power source (e.g., wall adapter, power bank, laptop, car charger). The Type-C Charging Indicator (21) will show charging status.
- Base Charging: Place the radio into the charging dock. Ensure the charging contacts on the radio align with those on the dock. Connect the base charger to a power outlet. The charging indicator on the base will show charging status.
Figure 4.1: Charging Methods
5. Operating Instructions
5.1 Power On/Off and Volume Adjustment
- To power on, rotate the Power/Volume knob (3) clockwise.
- To power off, rotate the Power/Volume knob (3) counter-clockwise until it clicks.
- Adjust the volume by rotating the Power/Volume knob (3) while the radio is on.
5.2 Frequency Range Overview
The UV-K61 Pro supports a wide range of frequencies for both transmission (TX) and reception (RX):
- FM: 65~108MHz (RX)
- AM: 108~136MHz (RX)
- VHF: 136~173.995MHz (TX&RX)
- VHF: 200~219.995MHz (RX)
- VHF: 220~259.995MHz (TX&RX)
- Police: 350~390MHz (TX&RX)
- UHF: 400~480MHz (TX&RX)
- UHF: 480~599.995MHz (RX)
Figure 5.1: Frequency Range Chart
5.3 Wireless Copy Frequency
This feature allows you to quickly match frequencies with another radio:
- Press the designated button (often labeled 'SEARCH' or similar, refer to your specific keypad layout) to enter the "SEARCH" interface.
- Press the button again to initiate the search for another radio's transmission frequency and privacy code.
- Once a frequency is detected, press the MENU key to store the frequency.
- After storing, the two walkie-talkies should be able to communicate normally.
Figure 5.2: Wireless Copy Frequency in Action
5.4 NOAA Weather Radio Reception
The UV-K61 Pro can receive NOAA Weather Radio channels in the United States and Canada, providing long-term weather forecasts and real-time meteorological data. This helps in obtaining the latest weather and ocean conditions and can reduce the impact of extreme weather events through early warning.
Figure 5.3: NOAA Weather Reception
5.5 LED Flashlight
The built-in LED flashlight (2) can be activated for illumination in dark environments, making it useful for camping, basements, night patrols, and other situations requiring a light source.
Figure 5.4: LED Flashlight Function
5.6 Other Features
- 640 Channels: More channel reserves for convenient and faster one-touch intercom.
- 2 Tone 5 Tone BDC1200: Supports advanced signaling for single and group calls.
- Scanner Function: VFO scan range setting, three scan recovery methods, channel scan, CTC/DCS scan, scan channel addition and removal.
- Built-in Input Method: Allows editing channel names directly on the device.
- Frequency Step: Selectable between 2.5K, 5.0K, 6.25K, 8.33K, 10K, 12.5K, 20K, 25K, 30K, 50K, 100KHz.
- DTMF Encoder and Manual Dial: For advanced communication.
- Broadcast FM Radio Receiver: 87.5-108 MHz.
- VOX (Voice Activated Transmit): Hands-free operation.
- Alarm Function: For emergencies.
- Display Illumination: Programmable via keypad.
- Dual Watch / Dual Reception: Monitor two frequencies simultaneously.
- Battery Saving Function: Extends battery life.
- High Capacity Lithium-Ion Battery: 2600mAh for extended use.
- CTCSS/DCS Codes: 50 CTCSS tones and 105 DCS codes for privacy and interference reduction.
- Memory Channels: Up to 640 named memory channels.
- Power Selection: High or low power selectable.
- Function Beep: Audible feedback on keypad.
- Programmable Repeater Offset: For repeater use.
- Transmission Time-Out Timer: Prevents accidental long transmissions.
- PC Programmable: For advanced customization.
- Busy Channel Lock Out: Prevents transmitting on an occupied channel.
- Squelch Adjustment: Ten (10) levels of squelch adjustment.
- Roger Beep: End of transmission tone.
- Accessory Port: Two (2) pins for Kenwood accessory port compatibility.
- One Touch Search Frequency: Quick frequency search.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
- Battery Care: Charge the battery regularly. Avoid fully discharging the battery frequently to prolong its lifespan. Store the radio and battery in a cool, dry place when not in use for extended periods.
- Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna.
- Water Resistance: This device is NOT waterproof/water-resistant. Avoid exposure to water or high humidity.
7. Troubleshooting
- No Power: Check if the battery is properly installed and charged. Ensure the power/volume knob is turned on.
- Cannot Transmit/Receive: Verify that the frequency is correct and within the radio's TX/RX range. Check squelch settings. Ensure the antenna is connected.
- Poor Audio Quality: Adjust volume. Check antenna connection. Ensure you are within range of the other radio.
- Charging Issues: Ensure the charger and cable are properly connected. Check for damage to the charging port or cable.
8. Specifications
General
| Parameter | Value |
|---|---|
| Channel Capacity | 640 |
| Channel Spacing | 25.0 KHz/12.5 KHz |
| Input Voltage | 7.4V DC |
| Battery Life (5% TX, 5% RX, 90% Standby) | Li-ion: 15 hours @5 watts |
| Operating Temperature | -10℃ to 60℃ |
| Antenna Impedance | 50Ω |
| Radio Dimensions (LxAxP) | 64x121x35mm (4.72*2.17*1.38 inch, Antenna Not Included) |
| Radio Weight | 240g |
| Battery Capacity | 2600 mAh |
| Waterproof / Water-Resistant | No |
| Material | Plastic |
| Maximum Range | 3km-5km |
| Certification | CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee |
Transmitter
| Parameter | Value |
|---|---|
| Frequency Range (TX) | 136~173.995 MHz (VHF), 220~259.995 MHz (VHF), 350~390 MHz (Police), 400~480 MHz (UHF) |
| RF Output Power | 5 Watts Max (3w-5w) |
| Modulation | 16KOF3E/11KOF3E |
| Spurious Emission | -16 dBm <1GHz, -16 dBm >1GHz |
| Frequency Stability | ±2.5 ppm |
| Audio Distortion | ≤5% |
| FM Hum & Noise | 40 dB |
Receiver
| Parameter | Value |
|---|---|
| Frequency Range (RX) | 65~108 MHz (FM), 108~136 MHz (AM), 136~174 MHz (VHF), 200~219.995 MHz (VHF), 220~260 MHz (VHF), 350~390 MHz (Police), 400~520 MHz (UHF), 480~599.995 MHz (UHF) |
| Sensitivity (12dB SINAD) | -120 dBm |
| Adjacent Channel Selectivity | -60 dBm |
| Intermodulation and Rejection | -70 dBm |
| Rated Audio Power Output | 0.75 Watts@16Ω |
| Rated Audio Distortion | ≤5% |
9. User Tips
- Always ensure your battery is fully charged before extended use.
- For optimal range, ensure the antenna is securely fastened and unobstructed.
- Experiment with the squelch levels to find the best balance between clear reception and background noise in your environment.
- Utilize the wireless copy frequency feature for quick setup with other compatible radios.
10. Warranty and Support
10.1 Warranty Information
The manufacturer promises to carefully inspect 100% of the quality, specification, and quantity of the items before delivery.
- Radio Body: ONE YEAR WARRANTY
- Battery, Charger, and Other Accessories: THREE MONTHS warranty
Shipping costs for warranty repair/exchange/return are to be paid by the buyer.
10.2 Customer Support
For any inquiries, issues, or support needs, please contact the seller directly. Kindly provide your correct shipping address if sending any parcel for service.
