Hirisi S9

Contents

Hirisi S9 Wireless Carp Fishing Bite Alarm Set Instruction Manual

Models: S9-3 (1 Receiver + 3 Alarms), S9-4 (1 Receiver + 4 Alarms)

1. Introduction

Thank you for choosing the Hirisi S9 Wireless Carp Fishing Bite Alarm Set. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new fishing accessory. Designed for carp anglers, this set offers reliable bite indication with wireless convenience, ensuring you never miss a catch.

2. Product Overview

The Hirisi S9 set includes waterproof bite alarms and a wireless receiver, designed for durability and performance in various fishing conditions. Key features include adjustable sensitivity, tone, and volume, a long wireless range, and extended standby time.

2.1 Components

  • Bite Alarms (3 or 4 depending on set)
  • Wireless Receiver (1)
  • Protective Carrying Case
  • Small screwdriver (for battery compartment)
Hirisi S9 Wireless Bite Alarm Set (1+3) with receiver and accessories in a case, highlighting key features.
Hirisi S9 Wireless Bite Alarm Set (1+3) showing alarms, receiver, and accessories.
Hirisi S9-3 set in protective case.
Hirisi S9-3 set (1 receiver + 3 alarms) in its protective case.
Hirisi S9-4 set in protective case.
Hirisi S9-4 set (1 receiver + 4 alarms) in its protective case.

2.2 Product Demonstration Video

A video demonstrating the features and operation of the Hirisi S9 Wireless Bite Alarm Set.

3. Specifications

FeatureDescription
MaterialABS
TypeFish Bell/Alarm
Wireless RangeOver 150 meters
Power Source9V Battery (for both alarms and receiver)
Connectivity2.5mm jack on alarms for external devices
WaterproofYes
Package Dimensions40cm (L) x 35cm (W) x 10cm (H)
Package Weight0.8 kg

4. Setup Guide

4.1 Battery Installation

  1. Locate the battery compartment on the back of each bite alarm and the receiver.
  2. Use a small screwdriver to open the battery cover.
  3. Insert a 9V battery into each unit, ensuring correct polarity (+/-).
  4. Securely close the battery cover.
Diagram showing bite alarm and receiver with 9V battery compartments.
Insert 9V batteries into both the alarms and the receiver.

4.2 Mounting the Bite Alarms

  1. Screw each bite alarm onto your rod pod or bank stick. Ensure it is securely fastened and stable.
  2. Place your fishing rod onto the alarm's cradle.
  3. Thread your fishing line through the alarm's sensor groove.
Hirisi S9 bite alarm mounted on a fishing rod, showing line placement.
Proper mounting of the bite alarm on a rod pod.
Close-up of Hirisi S9 bite alarm on a rod, showing the line passing through the sensor.
Ensure the fishing line passes through the alarm's sensor groove.

4.3 Pairing Receiver and Alarms

The alarms and receiver are typically pre-paired. If re-pairing is needed:

  1. Turn on both the receiver and the bite alarms.
  2. On the receiver, press and hold the function button (often marked with a gear icon or similar) for 3 seconds to enter pairing mode.
  3. Briefly press the power button on each bite alarm you wish to pair. The receiver will indicate successful pairing (e.g., a specific LED lights up or a sound is emitted).
  4. Adjust settings for each alarm as desired (see Section 5.2).
  5. Press the function button again on the receiver to exit pairing mode.

5. Operating Instructions

5.1 Power On/Off

  • Bite Alarms: Press and hold the power button (usually marked with a circle and vertical line) on each alarm to turn it on or off.
  • Receiver: Press and hold the power button on the receiver to turn it on or off.

5.2 Adjusting Settings

Both the alarms and the receiver offer adjustable settings for optimal performance.

Bite Alarms:

  • Sensitivity (S): Press the 'S' button to cycle through different sensitivity levels. Higher sensitivity detects lighter bites.
  • Tone (T): Press the 'T' button to change the tone of the alarm sound.
  • Volume: Use the dedicated volume buttons (often marked V- and V+) on the alarm to adjust the sound level.
Close-up of the bite alarm's control buttons (S, Power, T).
Bite alarm control buttons for Sensitivity (S), Power, and Tone (T).

Receiver:

  • Volume (V-, V+): Use the 'V-' and 'V+' buttons to adjust the receiver's volume.
  • Sensitivity, Tone: These settings are typically controlled per alarm unit. The receiver will reflect the alarm's settings.
Close-up of the receiver's control buttons (S, V-, V+, T, Power, Settings).
Receiver control buttons for Sensitivity (S), Volume (V-, V+), Tone (T), Power, and Settings.

5.3 Changing LED Color (Bite Alarms)

To change the color of the warning LED light on the bite alarms, simultaneously press the 'S' and 'T' buttons. Cycle through available colors until your desired color is displayed.

Close-up of the bite alarm's LED indicators.
Bite alarm with LED indicators.

5.4 Bite Indication

When a fish takes the bait and pulls the line, the bite alarm will emit an audible sound and illuminate its LED indicators. Simultaneously, the receiver will sound and light up the corresponding LED indicator, alerting you to the activity on that specific rod.

Hirisi S9 bite alarm in action, indicating a bite.
Bite alarm indicating a fish bite.
Receiver with 6 LED indicator lights.
Receiver displaying activity with its 6 LED indicator lights.

5.5 External Device Connectivity

Each bite alarm is equipped with a 2.5mm jack, allowing for connection to external devices such as illuminated swingers or hangers for additional visual indication.

Close-up of the bite alarm's 2.5mm jack for external devices.
2.5mm jack for connecting external indicators.

6. Maintenance

To ensure the longevity and optimal performance of your Hirisi S9 Bite Alarm Set, follow these maintenance guidelines:

  • Cleaning: Wipe down the alarms and receiver with a soft, damp cloth after each use to remove dirt, mud, or fish residue. Avoid abrasive cleaners.
  • Waterproofing: The units are designed to be waterproof. However, avoid prolonged submersion and ensure battery compartments are securely closed to maintain water resistance.
  • Battery Replacement: Replace batteries when the indicators show low power or when performance degrades. Always use fresh 9V batteries.
  • Storage: Store the set in its protective carrying case in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
Image of the bite alarm in a wet environment, demonstrating its waterproof feature.
The Hirisi S9 bite alarm is designed to be waterproof.

7. Troubleshooting

ProblemPossible CauseSolution
No sound/light from alarm or receiverDead or incorrectly installed batteries; Unit not powered on.Check and replace batteries; Ensure units are powered on.
False alarmsSensitivity set too high; Wind or water movement.Reduce sensitivity using the 'S' button.
No connection between alarm and receiverUnits out of range; Pairing lost; Interference.Move receiver closer to alarms; Re-pair units (see Section 4.3); Avoid sources of strong electromagnetic interference.
LED color not changingIncorrect button combination.Ensure 'S' and 'T' buttons are pressed simultaneously.

8. User Tips

  • Test Before Use: Always test your bite alarm set at home before heading out to the fishing spot to ensure all units are functioning correctly and paired.
  • Spare Batteries: Keep a set of spare 9V batteries handy, especially for longer fishing trips, to avoid interruptions.
  • Optimal Placement: Position your alarms and receiver to maximize signal range and minimize potential interference from obstacles.
  • Waterproof Confidence: The Hirisi S9 is designed to be waterproof, offering peace of mind in wet conditions. However, always ensure battery covers are tightly sealed.

9. Warranty & Support

For any questions, technical support, or warranty inquiries regarding your Hirisi S9 Wireless Carp Fishing Bite Alarm Set, please contact the seller or refer to the official Hirisi website for assistance. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.