BAOFENG UV-K61 Pro

Contents

Baofeng UV-K61 Pro Walkie Talkie User Manual

Multi-Band Ham Radio with Wireless Copy Frequency and NOAA Weather Reception

Introduction

Thank you for choosing the Baofeng UV-K61 Pro Walkie Talkie. This advanced portable multi-band ham radio is designed for reliable long-range communication, featuring wireless frequency copying, NOAA weather reception, and versatile charging options. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance.

Package Contents

Please check the package carefully to ensure all items are present:

  • 1x Baofeng UV-K61 Pro Radio Unit
  • 1x Rechargeable Battery (2600mAh)
  • 1x Antenna
  • 1x User Manual
  • 1x Lanyard
  • 1x Belt Clip
  • 1x Base Charger
  • 1x Type-C Cable
Standard package contents for Baofeng UV-K61 Pro
Standard package contents: Radio, Battery, Sling, Belt Clip, Antenna, Charger Dock, Manual, Box.

Product Overview

Familiarize yourself with the components and controls of your Baofeng UV-K61 Pro:

Labeled diagram of Baofeng UV-K61 Pro walkie talkie parts
Baofeng UV-K61 Pro Parts Diagram:
  1. Antenna
  2. LED Flashlight
  3. Power/Volume knob
  4. Status LED (TX/RX LED)
  5. LCD Screen
  6. V/M Key VFO/MR MODE KEY
  7. A/B Select Key
  8. SWEEP Key
  9. MENU Key
  10. Key Pad
  11. Speaker
  12. Up Key
  13. Down Key
  14. EXIT Key
  15. Unlock Key
  16. Accessory Jack
  17. PTT Key
  18. Monitor Key
  19. FM Key
  20. Back Clip
  21. Type-C Charging Indicator
  22. Type-C Charging Port
Dimensions of Baofeng UV-K61 Pro walkie talkie
Radio Dimensions: Approximately 12cm (4.72inch) height (without antenna), 5.5cm (2.17inch) width, 3.5cm (1.38inch) depth.

Setup Guide

1. Battery Installation and Charging

The UV-K61 Pro comes with a 2600mAh rechargeable Li-ion battery. Ensure the battery is fully charged before first use.

  • Installation: Align the battery with the compartment on the back of the radio and slide it into place until it clicks securely.
  • Charging:
    • Base Charging: Place the radio in the provided charging dock. Ensure the charging contacts on the radio align with those on the dock. The charging indicator (21) will illuminate.
    • Type-C Charging: Connect a Type-C USB cable to the Type-C Charging Port (22) on the side of the radio. You can charge it using a power bank, car charger, or any compatible USB power source. The Type-C charging indicator (21) will show charging status.
Thickened large capacity 2600mAh battery with USB-C charging port
The 2600mAh battery features a USB-C charging port for convenience.
Various charging methods for Baofeng UV-K61 Pro
The radio supports both Type-C direct charging and traditional base charging, allowing for flexible power options including power banks and car chargers.

2. Antenna Attachment

Screw the antenna (1) clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.

3. Belt Clip and Lanyard

Attach the belt clip (20) to the back of the radio for easy carrying. The lanyard can be attached to the designated loop for added security.

Operating Instructions

1. Power On/Off and Volume Adjustment

Rotate the Power/Volume knob (3) clockwise to turn on the radio. Continue rotating to increase the volume. Rotate counter-clockwise to decrease volume and turn off the radio.

2. Frequency Range and Modes

The UV-K61 Pro supports a wide range of frequencies and modes:

  • FM Radio (RX): 65~108MHz
  • AM Airband (RX): 108~136MHz
  • VHF (TX&RX): 136~173.995MHz, 220~259.995MHz
  • VHF (RX Only): 200~219.995MHz
  • Police Band (TX&RX): 350~390MHz
  • UHF (TX&RX): 400~480MHz
  • UHF (RX Only): 480~599.995MHz

Use the V/M Key (6) to switch between VFO (Variable Frequency Oscillator) mode for direct frequency input and MR (Memory Recall) mode for stored channels.

Detailed frequency range chart for Baofeng UV-K61 Pro
Comprehensive frequency ranges supported by the UV-K61 Pro.

3. Wireless Copy Frequency (One-Touch Automatic Frequency Matching)

This feature allows for quick frequency matching with another radio:

  1. Press the designated button (often the SWEEP Key (8) or a programmable function key) to enter the "SEARCH" interface.
  2. Press the button again to initiate the search for another radio's transmission frequency and privacy code.
  3. Once detected, press the MENU Key (9) to store the frequency.

This

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.