morayelec ME201R

Contents

ME201R Wifi Ultrasonic Wireless Temperature Sensor Liquid Level Monitor User Manual

Model: ME201R

1. Introduction

The ME201R is a high-performance liquid level monitoring device designed for water and oil tanks. It utilizes ultrasonic sensor technology for unattended automatic detection, providing high-precision liquid level measurements and intelligent remote monitoring capabilities via a mobile application. This device also features temperature measurement and water level alarm functions to ensure comprehensive tank management.

Video: Installation and usage demonstration of the ME201R Liquid Level Monitor.

2. Specifications

AttributeValue
Product NameWireless Level Monitor
Model NumberME201R
Brand Namemorayelec
TypeDigital
DIY SuppliesPlumbing
ApplicationWater / Oil Tank
UsageHome Automation System
Operating Temperatures-20-70℃
Operation SystemAndroid, iOS APP
APPTuya SmartLife
Measuring Range0.1m~4.0m
Accuracy±0.02m
Power Supply100-240VAC to DC 5V
Battery IncludedNo
CertificationCE
Network Mode (Gateway)2.4G WiFi + RF433 MHz
RF433MHz Range (Sensor to Gateway)Max 300m (no obstacle)
WiFi Range (Gateway to Router)Max 50m (no obstacle)
ProtectionIP65

3. Package Contents

The package includes the following items:

  • Ultrasonic Level Sensor
  • Tank Level Monitor Display Unit
  • AC/DC Power Adapter (100-240VAC to DC 5V)
  • Type-C USB Cable (0.8m)
  • Mounting Screws
  • User Manual (this document)
Contents of the ME201R package including sensor, monitor, cables, adapter, and screws.

Image: ME201R package contents.

4. Safety Information

  • Ensure the power supply matches the device's requirements (100-240VAC to DC 5V).
  • Do not expose the device to extreme temperatures or direct sunlight beyond its operating range.
  • Keep the device away from strong electromagnetic fields.
  • Avoid disassembling the device, as this may void the warranty and cause damage.
  • Ensure proper installation to prevent water ingress into electrical components.

5. Setup and Installation

5.1 Physical Installation of the Sensor

  1. Remove the release paper from the gasket and attach the gasket to the center of the tank where the hole will be drilled.
  2. Drill a hole in the middle of the tank with a diameter greater than 55mm.
  3. Place the sensor over the gasket, ensuring it is aligned with the screw holes and unobstructed.
  4. Fasten the sensor securely with self-tapping screws.

Note: If the mounting surface is curved, it is sufficient to fix the sensor with screws only. Do not overtighten to prevent stressing the sensor.

Installation Precautions:

  • Hold the sensor perpendicular to the liquid surface.
  • Install the sensor away from the water inlet to avoid pseudo-echo.
  • The sensor installation cannot be close to the bulkhead, otherwise it will cause a strong pseudo-echo.
  • Ensure there are no obstacles in the reflective area of the sensor.
Diagram showing correct and incorrect sensor installation methods.

Image: Sensor installation guidelines.

Tank Type Considerations:

  • Square Water Tank: Must have a smooth inner wall, no pipelines, no protruding outlets, no floating balls, and no boards in the sensor's path.
  • Circular Water Tank: Ensure the diameter (D) is appropriate for the height (H):
    • H=4m, D>2m
    • H=3m, D>1.6m
    • H=2m, D>1.1m

5.2 Power Connection

  1. Power on the AC/DC ADAPTOR first, and then connect it to the sensor.
  2. Power on the gateway with the provided 5V/1A adapter.

6. Operation

6.1 Monitor Display

The Tank Level Monitor display unit provides real-time information:

  • Battery Icon: Shows the battery level of the sensor.
  • Percentage Display: Indicates the current liquid level in the tank (0%~100%).
  • Temperature Display: Shows the sensor's operating temperature (-20°C ~ 70°C).
  • LED Lights:
    • RF Status LED: Flashes for 15 seconds when the sensor is reporting data; off if the sensor is not reporting.
    • Pump LED: On when the pump is active; off when inactive.
    • WiFi LED: On when WiFi is connected; flashes rapidly during WiFi configuration; flashes slowly when WiFi is disconnected.
Detailed view of the ME201R monitor display showing battery, percentage, and temperature readings.

Image: Monitor display details.

6.2 App Interface Overview

The mobile application provides a comprehensive view and control over your liquid level monitor:

  • Liquid Level Ratio & Depth: Displays the current liquid level as a percentage and in meters.
  • Liquid Level Status: Indicates 'Normal', 'Full alarm', or 'Lower alarm'.
  • Temperature: Shows the current temperature detected by the sensor.
  • Sensor Power: Displays the current power status of the sensor.
  • Historical Data: View liquid level depth over time (Day, Month, Year).
Mobile app interface showing liquid level ratio, depth, status, temperature, and sensor power.

Image: Mobile app interface for liquid level monitoring.

Examples of water level alarm displays in the app: Normal, Full alarm, and Lower alarm.

Image: Water level alarm display examples.

7. App Connection and Settings

7.1 Downloading the App

Scan the QR code below to download the "TUYA Smart APP" or "Smart Life APP" on your mobile device.

[QR Code for Tuya Smart APP / Smart Life APP - Not embeddable in text]

7.2 Network Reset (Gateway)

To reset the gateway's network settings, press and hold the touch key on the gateway for 5 seconds. The LED light will flash rapidly. Release the button, and the network will reset, allowing the device to connect to the network automatically.

7.3 Connecting the Gateway to the App

  1. Ensure your phone's WiFi and Bluetooth are turned on.
  2. Open the Tuya Smart or Smart Life app and select 'Add Device'.
  3. The app will search for nearby devices. Select the 'Liquid Level Monitor' when it appears.
  4. Enter your 2.4GHz WiFi network information (SSID and password).
  5. Confirm the connection. Once successfully added, the device will appear in your app.

Note: The WiFi frequency can only be 2.4GHz, not 5GHz. When adding a device, make sure that the gateway and your phone are connected to the same WiFi network.

Screenshots showing the steps to connect the device to the mobile app, including WiFi selection and device addition.

Image: App connection steps.

7.4 App Settings

Within the app, you can configure various settings for your monitor:

  • Installation Height: Set the distance from the sensor to the tank bottom (A).
  • Liquid Maximum Depth: Define the maximum height of liquid in the tank (B).
  • Set Max: Configure the high-level alarm threshold (based on actual liquid level value C).
  • Set Min: Configure the low-level alarm threshold.
  • Sensor ID: Manage the gateway's linked sensor ID. To re-link a different sensor, update this ID.
  • Beep Alarm: Enable or disable the device's alarm sound.
  • Auto Pump Control: Enable automatic control of a pump based on liquid levels.
  • Pump Mode: Set pump operation to 'on-Supply' or 'off-Drainage'.
  • Pump Switch: Manually start or stop the pump.
App interface for pump control settings.

Image: App interface for pump control.

7.5 Multi-Tank Monitoring and Device Sharing

The app supports monitoring multiple tanks and allows you to share tank data with other users.

App interface showing multiple liquid level monitors for multi-tank monitoring.

Image: Multi-tank monitoring in the app.

8. Troubleshooting

  • Device not found or failed to connect to app: If your phone cannot find the device or fails to connect, perform a network reset on the gateway by pressing and holding the touch key for 5 seconds until the LED flashes rapidly. Ensure your phone and gateway are on the same 2.4GHz WiFi network during the connection process.
  • Indicator losing level indication or showing zero: If the level indicator starts losing accuracy or consistently shows zero, check the physical connection of the sensor to the gateway. Ensure the sensor is properly installed according to the precautions (perpendicular, away from water inlet/bulkhead). Try recalibrating the 'Installation Height' and 'Liquid Maximum Depth' settings in the app. Also, verify the sensor's power supply.
  • WiFi light flashing slowly: This indicates that the WiFi is disconnected. Check your router's status and ensure the gateway is within range.
  • Sensor light off: This means the sensor is not reporting data. Check the sensor's power connection and ensure it's properly linked to the gateway.

9. User Tips

  • Easy Setup: Users have noted the fast connection speed and ease of use, making setup straightforward.
  • Accurate Monitoring: The device provides accurate water level measurements and timely monitoring reminders.
  • Smart Automation: Leverage the Tuya SmartLife app to create scenes and automate pump control based on liquid levels (e.g., turn on pump when level is low, turn off when full).
  • Remote Access: Utilize the mobile app for remote monitoring of your tank's liquid level and temperature from anywhere.

10. Warranty and Support

For any issues not covered in this manual, please refer to the official user manual PDF for more detailed instructions or contact the seller for support. The official user manual (PDF) can be found at: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.