1. Introduction
Thank you for choosing the SAMOLLA Spinning Fishing Reel. This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your new fishing reel. Designed for versatility and durability, the SAMOLLA Spinning Reel series (1000-7000) is suitable for a wide range of fishing environments, including ocean boat, rock, and beach fishing, as well as freshwater lakes, rivers, reservoirs, and streams. Please read this manual thoroughly to ensure optimal performance and longevity of your reel.
2. Product Features
The SAMOLLA Spinning Fishing Reel incorporates advanced design and materials to enhance your fishing experience:
- Large Diameter Relief Knob Puller: Increases the static fishing force of the friction system by 30%, providing more control during intense fights.
- New Oblique Angle Design: Engineered to reduce frictional resistance between the fishing line and the reel, significantly improving casting distance.
- Double Bearing Structure: Ensures exceptionally smooth and stable operation, reducing wear and tear.
- Stainless Steel Bearing: Offers superior resistance to seawater and corrosion, extending the reel's lifespan in harsh conditions.
- One Way Bearing Without Clearance: Provides instant anti-reverse for solid hooksets and eliminates back play.
- Zaion Material Construction: Utilizes a lightweight yet strong material for the reel body, contributing to overall durability and reduced weight.
- X-Ship Gearing System: Designed for even tighter and more efficient winding of fishing line, ensuring consistent performance.
- ATD Drag System: A new-generation drag system that provides smooth, consistent drag pressure, adapting to fish pulls without jerking.
- Precision Gear Combination: Ensures the fishing vessel operates smoothly and efficiently.
- Aluminium Spool: Die-cast aluminum spool with a large line capacity, allowing for longer casts and more line storage.
- Brass Bearing: High-precision brass bearings equipped with a super hard gear disc for enhanced durability and power.
- Comfortable Left/Right Inter-changeable Handle: Allows for easy conversion between left-hand and right-hand retrieve to suit individual preferences.
- 6+1 Stainless Steel Ball Bearings: Provides super smooth reeling performance and increased durability.
- Unloading Adjustment: Features a longer thread length for the unloading force adjustment, allowing for more delicate and precise drag settings.
- Bold Winding Ring: The smooth and flat surface of the winding ring greatly reduces the problem of line tangling.
- Screw Thread Cup Design: Reduces friction and potential damage to the line during repeated casting.

Figure 2.1: Large Diameter Relief Knob Puller for enhanced drag control.

Figure 2.2: Oblique Angle Design for reduced friction and improved casting distance.

Figure 2.3: Internal view of the Double Bearing Structure and Stainless Steel Bearing for smooth, corrosion-resistant operation.

Figure 2.4: Diagram illustrating the One Way Bearing mechanism.

Figure 2.5: Key internal and external features: Zaion Material, X-Ship, ATD Drag, and Precision Gear.

Figure 2.6: Additional features: Aluminium Spool, Brass Bearing, Comfortable Handle, and 6+1 Ball Bearings.

Figure 2.7: Unloading Adjustment mechanism and the Bold Winding Ring.

Figure 2.8: Close-up of the Screw Thread Cup Design.
3. Specifications
The SAMOLLA Spinning Reel series is available in various models, each with specific characteristics:

Figure 3.1: Detailed specifications for KA1000-KA7000 models.
| Model | Gear Ratio | Ball Bearings | Max Drag (kg) | Weight (g) | Line Capacity (mm/m) |
|---|---|---|---|---|---|
| KA1000 | 5.4:1 | 6+1BB | 8KG | 228 | 0.15/180, 0.18/140 |
| KA2000 | 5.4:1 | 6+1BB | 8KG | 230 | 0.18/240, 0.20/200 |
| KA3000 | 5.4:1 | 6+1BB | 8KG | 232 | 0.20/240, 0.25/200 |
| KA4000 | 5.2:1 | 6+1BB | 10KG | 273 | 0.30/200, 0.35/160 |
| KA5000 | 5.2:1 | 6+1BB | 10KG | 283 | 0.40/155, 0.45/120 |
| KA6000 | 4.8:1 | 6+1BB | 12KG | 379 | 0.45/180, 0.50/145 |
| KA7000 | 4.8:1 | 6+1BB | 12KG | 388 | 0.45/200, 0.50/160 |
General Specifications:
- Hand Direction: Ambidextrous (Left/Right Inter-changeable handle)
- Baits Type: Fake Bait
- Fishing Reels Type: Pre-Loading Spinning Wheel
- Fishing Method: Spinning
- Position: Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River, Reservoir Pond, Stream, Management Field
Dimensions:

Figure 3.2: Physical dimensions for different reel sizes.
- SA1000-3000: Approximately 62mm (2.44in) width, 120mm (4.72in) height.
- SA4000/5000: Approximately 65mm (2.55in) width, 130mm (5.11in) height.
- SA6000/7000: Approximately 70mm (2.75in) width, 140mm (5.51in) height.
4. Setup and Installation
4.1 Attaching the Reel to a Fishing Rod
- Align the reel foot with the reel seat on your fishing rod.
- Tighten the locking nut on the reel seat until the reel is securely fastened. Ensure there is no wobble.
4.2 Spooling Fishing Line
- Open the bail arm.
- Tie the end of your fishing line to the spool using an arbor knot or similar secure knot. Trim any excess tag end.
- Close the bail arm.
- Hold the line firmly between your thumb and forefinger, applying light tension.
- Begin to reel the line onto the spool, ensuring it lays evenly. Do not overfill the spool; leave a small gap (approx. 1/8 inch) from the spool lip to prevent tangles.
4.3 Changing Handle Direction
The SAMOLLA Spinning Reel features a left/right inter-changeable handle:
- Unscrew the handle knob on the side you wish to remove it from.
- Pull the handle shaft out from the reel body.
- Insert the handle shaft into the opposite side of the reel body.
- Screw the handle knob back on to secure it.
5. Operating Instructions
5.1 Casting
- Hold the rod and reel comfortably.
- Press the line against the rod with your index finger.
- Open the bail arm.
- Bring the rod back over your shoulder, then swiftly cast forward, releasing your index finger as the rod reaches the desired casting angle. The Oblique Angle Design and Shallow Spool facilitate longer, smoother casts.
- As the lure or bait hits the water, close the bail arm manually or by turning the handle.
5.2 Retrieving Line
Turn the handle to retrieve your line. The Precision Gear and X-Ship system ensure smooth and efficient line retrieval, even under load.
5.3 Adjusting Drag
The drag system controls the amount of force required to pull line from the spool. Adjust the drag using the Large Diameter Relief Knob Puller on the top of the spool. Turn clockwise to increase drag tension and counter-clockwise to decrease it. The ATD Drag system provides consistent and smooth pressure during a fight. Set your drag to approximately one-third of your line's breaking strength.
6. Maintenance
Proper maintenance will extend the life and performance of your SAMOLLA Spinning Reel:
- Cleaning: After each use, especially in saltwater, rinse the reel thoroughly with fresh water. Do not submerge the reel. Gently wipe it dry with a soft cloth.
- Lubrication: Periodically apply a small amount of high-quality reel oil to moving parts such as the handle shaft, bail arm pivot points, and line roller. Use reel grease on the main gears. Refer to a fishing reel maintenance guide for detailed lubrication points.
- Inspection: Regularly check for any loose screws, worn parts, or damage. Pay attention to the line roller for smooth rotation and the bail arm for proper function.
- Line Management: Inspect your fishing line for fraying or damage. Replace line as needed. Ensure the line is spooled evenly to prevent tangles, aided by the Bold Winding Ring.
- Storage: Store your reel in a dry, cool place away from direct sunlight and extreme temperatures. Loosen the drag knob slightly during storage to relieve pressure on the drag washers.
7. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Line tangles or bird's nests | Overfilled spool, improper casting technique, twisted line, worn line. | Ensure spool is not overfilled. Practice casting. Check line for twists and replace if necessary. The Bold Winding Ring helps prevent this, but proper technique is key. |
| Reel feels stiff or grinds | Lack of lubrication, dirt/debris inside, damaged gears/bearings. | Clean and lubricate the reel. If problem persists, inspect internal components for damage. |
| Drag slips or is inconsistent | Drag washers are dry, dirty, or worn; drag knob not properly adjusted. | Clean and re-grease drag washers. Replace worn washers. Adjust drag knob correctly. |
| Bail arm does not close/open properly | Spring issue, debris in mechanism, bent bail wire. | Inspect for debris and clear. Check bail spring. If bent, seek professional repair or replacement. |
8. User Tips
Maximize your fishing success with these practical tips:
- Line Selection: Match your fishing line type and strength to the target species and fishing conditions. The shallow spool design is optimized for various line types.
- Saltwater Care: Despite being water-proof, always rinse your reel thoroughly with fresh water after saltwater use to prevent salt buildup and ensure the longevity of the stainless steel bearings.
- Drag Setting: Before fishing, test your drag setting by pulling line directly from the spool. Adjust it to allow line to be pulled out smoothly without excessive force, preventing line breakage.
- Casting Practice: Practice your casting technique to take full advantage of the Oblique Angle Design and achieve maximum throwing distance.
- Even Winding: Pay attention to how the line lays on the spool. Uneven winding can lead to tangles and reduced casting performance. The X-Ship system assists in even winding.
9. Warranty and Support
For any warranty claims, technical support, or service inquiries, please contact the seller or the SAMOLLA Official Store directly. Keep your purchase receipt as proof of purchase. Specific warranty terms and conditions may vary, so it is recommended to consult the seller for detailed information regarding your product's warranty period and coverage.