1. Introduction
Thank you for choosing the Jonsbo ZB-120/240/360 Series ARGB PWM Case Fans. These fans are designed to provide efficient cooling for your PC case or radiator while offering stunning customizable lighting effects. Featuring a unique four-sided thousand-layer mirror light effect and simplified wiring, these fans enhance both the performance and aesthetics of your computer system.

Image: Jonsbo ZB-120/240/360 series fans with ARGB sync logos, indicating compatibility with various motherboard ARGB systems.
2. Safety Information
- Always disconnect power from your computer before installing or handling internal components.
- Handle fans by their frames to avoid damaging blades or wiring.
- Ensure proper orientation of connectors to prevent damage to the fan or motherboard.
- Keep out of reach of children.
- Do not attempt to disassemble the fan unit.
3. Package Contents
The package typically includes:
- Jonsbo ZB Series ARGB PWM Case Fan(s) (ZB-120, ZB-240, or ZB-360 depending on model purchased)
- Mounting Screws

Image: A single 120mm fan showing the 4-pin PWM connector for fan speed control and the 3-pin ARGB connector for lighting.
4. Specifications
The Jonsbo ZB Series fans are available in various configurations (ZB-120, ZB-240, ZB-360) and blade orientations (Forward/Reverse). Key specifications are detailed below:
| Feature | ZB-120 (Forward) | ZB-120WR (Reverse) | ZB-240 (Forward) | ZB-240WR (Reverse) | ZB-360 (Forward) | ZB-360WR (Reverse) |
|---|---|---|---|---|---|---|
| Model Number | ZB-120/240/360 | |||||
| Fan Size (L*W*H) | 120*120*28mm | 120*120*28mm | 242*123*28mm | 242*123*28mm | 362*123*28mm | 362*123*28mm |
| Fan Speed (RPM) | 700-2400 (±10%) | 700-1800 (±10%) | 700-2400 (±10%) | 700-1800 (±10%) | 700-2400 (±10%) | 700-1800 (±10%) |
| Air Volume (CFM) | 20.95-65.26 | 18.75-47.71 | 20.95-65.26 | 18.75-47.71 | 20.95-65.26 | 18.75-47.71 |
| Wind Pressure (mmH2O) | 0.45-3.20 | 0.33-1.66 | 0.45-3.20 | 0.33-1.66 | 0.45-3.20 | 0.33-1.66 |
| Noise Level (dB(A)) | 20.3-36.6 | 16.4-30.7 | 20.3-36.6 | 16.4-30.7 | 20.3-36.6 | 16.4-30.7 |
| Rated Voltage (FAN/LED) | FAN DC12V / LED 5V | |||||
| Rated Current (FAN/LED) | 0.20A / 0.71A | 0.10A / 0.71A | 0.37A / 1.16A | 0.16A / 1.16A | 0.55A / 1.35A | 0.35A / 1.35A |
| Power (FAN/LED) | 2.40W / 3.55W | 1.20W / 3.55W | 4.44W / 5.80W | 1.92W / 5.80W | 6.60W / 6.75W | 4.20W / 6.75W |
| Fan Bearings | Hydraulic Bearings (Fluid Bearing) | |||||
| Life (MTTF) | ≥20000h (at 25 ℃ Room Temp) | |||||
| Power Interface | PWM 4PIN | |||||
| ARGB Interface | ARGB 3PIN (5V) | |||||
| Blade Quantity | 7 | |||||
| Certification | CE, RoHS | |||||
Note: ZB-120 fans have 32 LED beads around + 9 parallel axis. ZB-240 and ZB-360 models also feature a similar LED bead configuration for their combined units.

Image: Detailed specification table for ZB-120, ZB-240, ZB-360 (forward and reverse) models.
5. Setup and Installation
5.1 Physical Installation
The Jonsbo ZB series fans are designed for easy installation with a joint structure and 4-screw mounting. Ensure you select the correct fan size (120mm, 240mm, or 360mm) and blade orientation (forward or reverse) for your specific cooling needs and airflow direction.
- Identify the desired mounting location in your PC case or on your radiator.
- Align the fan(s) with the screw holes.
- Secure the fan(s) using the provided mounting screws. Do not overtighten.

Image: Multiple versions of fans (ZB-120, ZB-240, ZB-360) in forward and reverse configurations, illustrating different airflow directions.

Image: Combined fan gate light effect and 4-screw installation points.
5.2 Wiring
The ZB series fans feature simplified wiring, with a single cable connecting to the motherboard for both PWM fan control and ARGB lighting.
- PWM Connection: Connect the 4-pin PWM connector from the fan to an available 4-pin fan header on your motherboard. This allows for dynamic fan speed control based on system temperature.
- ARGB Connection: Connect the 3-pin ARGB connector from the fan to a 3-pin 5V ARGB header on your motherboard or a compatible ARGB controller.
Important Note for ARGB: ZA/ZB-360 fans require your motherboard or controller to support at least 68 LED chips. Some motherboards allow adjusting the number of LED chips in their software. Ensure your system meets this requirement for proper lighting functionality.

Image: Simplified wiring diagram showing a single cable connecting the fan unit to the motherboard.
5.3 Software Configuration (ARGB Sync)
To control the ARGB lighting effects, you will need to use your motherboard's dedicated ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard's software is up-to-date.
- Install the latest version of your motherboard's ARGB control software.
- Launch the software and navigate to the lighting control section.
- The Jonsbo ZB series fans should be detected as addressable RGB devices.
- Customize lighting patterns, colors, and effects as desired.

Image: A visual guide demonstrating how to use motherboard software to control ARGB lighting effects, including color and pattern selection.
6. Operating Instructions
Once installed and connected, the fans will operate automatically. The PWM function allows your motherboard to adjust fan speed based on CPU or system temperatures, providing optimal cooling and noise levels.
- Fan Speed Control: The 4-pin PWM connection enables your motherboard to dynamically control the fan speed (700-2400 RPM for forward, 700-1800 RPM for reverse) based on thermal load. This can be configured in your motherboard's BIOS/UEFI settings or through system monitoring software.
- ARGB Lighting Control: The ARGB lighting is controlled via your motherboard's ARGB software. You can select from a wide range of colors and effects to match your system's aesthetic.

Image: Diagram illustrating the positive light effect and airflow direction for both standard (inlet surface) and reverse (air outlet surface) fan blades.

Image: Performance metrics (Noise, RPM, Airflow) for both forward and reverse fan blade configurations, highlighting fine-tuning for practical performance and quiet operation.
7. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your fans.
- Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft brush. Ensure the fan is powered off and disconnected before cleaning.
- Inspection: Check for any loose connections or obstructions that might hinder fan operation.
8. Troubleshooting
- Fan Not Spinning:
- Ensure the 4-pin PWM connector is securely plugged into the motherboard fan header.
- Check BIOS/UEFI settings to ensure the fan header is enabled and configured correctly. - ARGB Lights Not Working/Incorrect Colors:
- Verify the 3-pin ARGB connector is correctly plugged into a 5V ARGB header (not a 12V RGB header). Incorrect voltage can damage the LEDs.
- Ensure your motherboard's ARGB software is installed and up-to-date.
- For ZB-360 fans, confirm your motherboard or controller supports at least 68 LED chips. Adjust LED chip count in software if available.
- Check for any loose connections in the ARGB chain if multiple fans are connected in series. - Excessive Noise:
- Ensure the fan is securely mounted and not vibrating against the case.
- Check for any cables or obstructions hitting the fan blades.
- Dust buildup can cause imbalance and noise; clean the fan thoroughly.
9. User Tips
- Optimal Airflow: Consider using a combination of forward and reverse fans to create balanced positive or negative pressure within your PC case for optimal cooling. Forward fans typically draw air in, while reverse fans push air out.
- Cable Management: Utilize the simplified wiring design to maintain a clean and organized build, which also improves airflow.
- ARGB Customization: Experiment with your motherboard's ARGB software to find unique lighting effects that complement your build. Many motherboards offer advanced customization options.

Image: Jonsbo ZB series fans installed in a PC case, demonstrating their vibrant ARGB lighting and integration with other components.
10. Warranty and Support
For warranty information or technical support, please refer to the official Jonsbo website or contact your retailer. Keep your proof of purchase for any warranty claims.