SAMOLLA FS1000-7000

Contents

SAMOLLA FS1000-7000 Series Spinning Fishing Reel

Instruction Manual

Introduction

Thank you for choosing the SAMOLLA FS1000-7000 Series Spinning Fishing Reel. This manual provides essential information for the proper setup, operation, and maintenance of your new fishing reel. Designed for versatility, these reels are suitable for various fishing methods including ocean boat, rock, and beach fishing, as well as lake, river, reservoir pond, and stream fishing. With its robust construction and advanced features, your SAMOLLA reel is built to deliver a smooth and reliable fishing experience.

SAMOLLA FS1000-7000 Spinning Fishing Reel

Figure 1: SAMOLLA FS1000-7000 Spinning Fishing Reel

Setup and Assembly

  1. Handle Installation: The SAMOLLA FS series reels feature a left/right inter-changeable handle. To change the handle side, simply unscrew the handle knob on one side, remove the handle, and insert it into the opposite side of the reel body. Secure it by screwing the knob back on. Ensure the handle is firmly attached before use.
  2. Line Spooling: The reel is equipped with a die-cast aluminum spool with a large line capacity. When spooling your fishing line, ensure it is wound evenly and tightly to prevent tangles and optimize casting performance. The oblique angle design of the spool is engineered to reduce frictional resistance during casting.
  3. Drag Adjustment: The unloading adjustment mechanism allows for precise control over the drag force. Turn the relief knob on the front of the spool to adjust the drag. A longer thread length provides more delicate adjustment. The large diameter relief knob puller increases the static fishing force of the friction system by 30%.
Key Features Diagram: Aluminum Spool, Brass Bearing, Comfortable Handle, 6+1 BB

Figure 2: Key components and features of the reel.

Unloading Adjustment and Bold Winding Ring

Figure 3: Detail of the unloading adjustment and winding ring.

Operating Instructions

  1. Casting: Open the bail arm. Hold the line with your index finger, then cast your lure or bait. The oblique angle design of the spool helps reduce friction, allowing for longer and smoother casts.
  2. Retrieving: Close the bail arm manually or by turning the handle. Begin reeling in the line. The X-Ship system ensures tighter winding, while the precision gear combination and magnesium alloy main gear contribute to smooth operation.
  3. Fighting Fish: When a fish bites, the ATD (Automatic Tournament Drag) drag system provides a smooth and consistent drag that continues to work while smoothly following fish pulls, helping to prevent line breakage. Adjust the drag as needed during the fight using the relief knob.
  4. Handle Operation: The comfortable handle can be used ambidextrously. Ensure a firm grip for optimal control during retrieval and fighting fish.
Oblique Angle Design Spool for improved casting

Figure 4: Oblique angle spool design for enhanced casting distance.

Advanced Reel Features: Zaion Material, X-Ship, ATD Drag, Precision Gear

Figure 5: Diagram illustrating advanced features like X-Ship and ATD Drag.

Maintenance

Proper maintenance will extend the life and performance of your SAMOLLA fishing reel.

  1. Cleaning: After each use, especially in saltwater, rinse the reel thoroughly with fresh water. Do not submerge the reel. Wipe it dry with a soft cloth.
  2. Lubrication: Periodically apply a small amount of high-quality reel grease to the main gear and a drop of reel oil to the ball bearings and other moving parts. Refer to the specifications for the 6+1 stainless steel ball bearings and brass precision bearings.
  3. Storage: Store your reel in a dry, cool place away from direct sunlight and extreme temperatures. Loosen the drag completely before storing to prevent compression of the drag washers.
Magnesium Alloy Main Gear

Figure 6: Magnesium alloy main gear for smooth operation.

Troubleshooting

  • Line Tangles: Ensure proper line spooling. Overfilling the spool or using line that is too heavy for the reel can cause tangles. The bold winding ring is designed to reduce tangling.
  • Stiff Operation: If the reel feels stiff, it may require cleaning and lubrication. Check for any debris or sand in the moving parts.
  • Drag Slipping/Sticking: This can be due to worn drag washers or contamination. Clean the drag system and ensure it is properly lubricated. If issues persist, consider replacing drag washers.
  • Handle Wobble: Ensure the handle is securely screwed into the reel body. If the wobble persists, inspect the handle shaft and connection point for wear.

Specifications

The SAMOLLA FS1000-7000 series offers a range of models with varying capacities and specifications:

Fishing Reel Parameter Table

Figure 7: Detailed specifications for SAMOLLA SA1000-SA7000 models.

ModelGear RatioBall BearingsMax Drag (kg)Weight (g)Line Capacity (mm/m)
SA10005.2:16+1BB6KG1890.15/180 0.18/140 0.20/120
SA20005.2:16+1BB6KG1900.18/360 0.20/300 0.25/190
SA30005.2:16+1BB6KG1950.20/340 0.25/220 0.30/150
SA40005.2:16+1BB8KG2290.20/240 0.25/200 0.37/100
SA50005.2:16+1BB8KG2370.35/180 0.40/140 0.45/110
SA60005.2:16+1BB10KG2880.30/250 0.35/200 0.40/110
SA70005.2:16+1BB10KG2950.35/220 0.40/160 0.45/130

General Product Properties:

  • Hand Direction: Ambidextrous (Left/Right Inter-changeable)
  • Baits Type: Fake Bait
  • Fishing Reels Type: Pre-Loading Spinning Wheel
  • Fishing Method: Spinning
  • Materials: Aluminum Spool, Brass Bearing, Magnesium Alloy Main Gear, Zaion Material
Reel Dimensions by Model Size

Figure 8: Reel dimensions for different model sizes.

Model SeriesWidth (mm/in)Height (mm/in)
SA1000-300062mm / 2.44in120mm / 4.72in
SA4000/500065mm / 2.55in130mm / 5.11in
SA6000/700070mm / 2.75in140mm / 5.51in

User Tips

  • For optimal casting distance, ensure your line is evenly spooled and not overfilled. The oblique angle spool design is specifically engineered to reduce friction.
  • Regularly check and adjust your drag settings. The large diameter relief knob allows for fine-tuning, which is crucial when targeting different fish species or using varying line strengths.
  • Take advantage of the ambidextrous handle. If you feel fatigue in one hand, switching the handle to the other side can provide comfort during long fishing sessions.
  • The 6+1 stainless steel ball bearings and brass precision bearings contribute to the reel's smooth performance. Keep these components clean and lightly lubricated for the best experience.

Warranty and Support

SAMOLLA is committed to providing high-quality fishing equipment. For any questions regarding your reel's operation, maintenance, or potential issues, please contact your retailer or SAMOLLA customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.