Introduction
The Coospo BC200 is a high-performance GPS bike computer designed to enhance your cycling experience. Featuring a 2.4-inch display, ANT+ and Bluetooth 5.0 connectivity, and multi-language support, it provides comprehensive data for your rides. This manual will guide you through the setup, operation, and maintenance of your BC200 to ensure optimal performance and longevity.
What's in the Box
Upon unpacking your Coospo BC200, please verify that all the following components are included:
- Coospo BC200 GPS Bike Computer
- USB Charging Cable
- Standard Bike Mount (Fastener Type)
- Out-front Bike Mount (Bracket Type)
- Rubber Bands for mounting
- L-shaped Tool for mount installation
- (Optional, depending on package) Heart Rate Monitor
- (Optional, depending on package) Cadence Sensor
- (Optional, depending on package) Speed Sensor
Setup
1. Charging the Device
Before first use, fully charge your BC200 using the provided USB cable. Connect the cable to the charging port on the device and a standard USB power source (e.g., computer USB port or USB wall adapter).
2. Mounting the Bike Computer
The BC200 supports two types of mounts: Fastener Type and Bracket Type.
Fastener Type Mount:
- Place the mount on your handlebar or stem.
- Secure it using the provided rubber bands, ensuring a snug fit.
- Twist the BC200 onto the mount until it locks into place.
Bracket Type Mount (Out-front):
- Attach the bracket to your handlebar using the L-shaped tool and screws.
- Ensure the mount is securely fastened and positioned for optimal viewing.
- Twist the BC200 onto the mount until it locks into place.
3. Language Setting
The BC200 supports multiple languages. To set your preferred language:
- Power on the device.
- Navigate to the 'Language' menu.
- Select your desired language from the list (e.g., English, Español, Русский, Deutsch, Português, Français, Türkçe).
4. Sensor Pairing (BLE and ANT+)
The BC200 is compatible with both Bluetooth Low Energy (BLE) and ANT+ sensors for speed, cadence, heart rate, and power meters.
- Ensure your sensors are active and within range of the BC200.
- On the BC200, navigate to the 'Sensor Pairing' menu.
- Select 'Add New Sensor' and choose the type of sensor you wish to pair.
- The BC200 will scan for available sensors. Select your sensor from the list to complete pairing.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the power button (usually on the side) until the screen illuminates.
- Power Off: Press and hold the power button until a power-off prompt appears, then confirm.
2. GPS Positioning
The BC200 utilizes GPS, BEIDOU, and GLONASS satellite systems for accurate positioning. Upon powering on, the device will automatically search for satellite signals. Ensure you are in an open area for faster signal acquisition.
3. Multidata Display and Custom Settings
The BC200 offers a versatile display capable of showing over 70 cycling parameters. You can customize the display layout to suit your preferences, with options for 5 types of self-defined display pages and 9-4 self-defined display squares per page.
- Navigate to the 'Display Settings' menu.
- Choose from predefined layouts or create your own by selecting which data fields to show (e.g., Speed, Distance, Time, Heart Rate, Cadence, Power, Altitude, Temperature, Calories).
4. Auto Backlight
The 2.4-inch LCD features a sunlight-readable display and an automatic backlight function. The backlight adjusts based on ambient light conditions, ensuring visibility during both day and night rides.
5. Data Synchronization
You can sync your ride data to popular platforms like Strava using the CoospoRide App or via USB transmission.
- Via CoospoRide App: Download the CoospoRide App to your smartphone. Connect your BC200 via Bluetooth. The app allows you to upload '.fit' files directly to Strava after authorization.
- Via USB: Connect your BC200 to your PC using the USB cable. The device will appear as a mass storage device, allowing you to access and upload '.fit' files to Strava or other platforms manually.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the BC200 in a cool, dry place when not in use. Avoid extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the device frequently. Charge regularly, especially if storing for extended periods. The device offers up to 36 hours of battery life.
- Water Resistance: The BC200 is IP67 rated, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. However, it is not recommended for underwater use. Ensure the charging port cover is securely closed.
Troubleshooting
- Device not powering on: Ensure the device is fully charged. If still unresponsive, try a soft reset (refer to the device's specific button combination for reset, usually holding multiple buttons).
- GPS signal not acquired: Move to an open area away from tall buildings or dense foliage. Wait a few minutes for the device to acquire satellites.
- Sensors not connecting:
- Ensure sensors are active and have fresh batteries.
- Check that sensors are within range of the BC200.
- Re-attempt the pairing process as described in the Setup section.
- Ensure no other devices are interfering with the ANT+ or Bluetooth signal.
- Data not syncing to app/PC:
- For app sync, ensure Bluetooth is enabled on your phone and the BC200 is connected to the CoospoRide app.
- For USB sync, ensure the USB cable is properly connected and your computer recognizes the device.
- Check for available updates for the CoospoRide app or BC200 firmware.
Specifications
| Feature | Specification |
|---|---|
| Model | BC200 |
| Display | 2.4-inch LCD, Sunlight Readable, Auto Backlight |
| Connectivity | ANT+, Bluetooth 5.0 |
| GPS Systems | GPS, BEIDOU, GLONASS |
| Battery Life | Up to 36 Hours |
| Waterproof Rating | IP67 |
| Cycling Parameters | 70+ data types |
| Display Customization | 5 types of self-defined display pages, 9-4 self-defined display squares |
| Origin | Mainland China |
| Certification | CE |
| Package Dimensions (approx.) | 30cm x 20cm x 5cm |
| Package Weight (approx.) | 0.7 kg |
User Tips
- The BC200 is fully compatible with external cadence, speed, and heart rate sensors, allowing for a comprehensive tracking experience. Ensure these are paired correctly for all data points.
- For best GPS accuracy, allow the device a few moments to acquire a strong satellite signal before starting your ride.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official COOSPO website or contact your retailer. Keep your proof of purchase for any warranty claims.