1. Introduction
The VXE Dragonfly R1 Nearlink Gaming Mouse is a high-performance, ultra-lightweight gaming mouse designed for precision and versatility. It features advanced Nearlink wireless technology, a high-precision PAW3395SE sensor, and multiple connection modes to suit various gaming and productivity needs. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your VXE Dragonfly R1 mouse.
2. Package Contents
The contents of your VXE Dragonfly R1 package may vary slightly depending on the specific model (R1SE, R1, R1 PRO, R1 PRO MAX). Please refer to the following list:
For R1SE and R1 Normal:
- Wireless receiver
- Charging/data umbrella cord (Type-C cable)
- Help manual
- Warranty voucher
For R1 PRO and R1 PRO MAX:
- Wireless receiver
- Charging/data umbrella cord (Type-C cable)
- Receiver extender
- Small size PTFE foot sticker
- Help Manual
- Warranty Voucher
- One copy of anti-skid sticker (black with black, white with white)
3. Setup and Connection
The VXE Dragonfly R1 mouse supports three connection modes: Wired (Type-C), 2.4G Wireless (Nearlink), and Bluetooth. The R1SE and R1 models are equipped with 2.4G wireless and Bluetooth dual mode, while R1 Pro/R1 Pro Max models support Wired/2.4G wireless only.
3.1. Wired Connection
Connect the mouse to your computer using the provided Type-C charging/data cable. The mouse will function immediately in wired mode and will also charge its internal battery.
3.2. 2.4G Wireless Connection (Nearlink)
- Insert the 2.4G wireless receiver into an available USB port on your computer.
- Turn on the mouse. The mouse should automatically connect to the receiver.
- For optimal signal stability, especially in environments with interference, use the receiver extender (included with R1 PRO and R1 PRO MAX models) to position the receiver closer to the mouse.
3.3. Bluetooth Connection (R1SE and R1 only)
- Switch the mouse to Bluetooth mode (refer to the mouse's bottom switch or indicator for mode selection).
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select "VXE Dragonfly R1" (or similar name) from the list of available devices to pair.
- Once paired, the mouse can be used wirelessly via Bluetooth.
4. Operating Instructions
4.1. VHUB-Station Management Software
To unlock the full potential of your VXE Dragonfly R1 mouse, download and install the VHUB-Station Management software (supports Windows 10 and above). This software allows you to:
- Adjust DPI settings (Dots Per Inch)
- Configure polling rate (125Hz, 250Hz, 500Hz, 1000Hz, 2000Hz, 4000Hz)
- Set custom key macros
- Program buttons
- Manage performance settings
- Restore factory settings
4.2. Sensor and Performance
The mouse is equipped with either a PAW3395 or PAW3395SE esports flagship sensor, offering accurate tracking and high performance.
- PAW3395 Sensor:
- DPI: 100 - 26000 DPI
- Tracking Rate: 650 IPS
- Acceleration: 50G
- PAW3395 SE Sensor:
- DPI: 100 - 18000 DPI
- Tracking Rate: 400 IPS
- Acceleration: 40G
The mouse also features drive-free DPI presets, typically accessible via a button on the mouse:
- Red: 600 DPI
- Green: 800 DPI (default)
- Blue: 1600 DPI
- Purple: 3200 DPI
5. Maintenance
To ensure the longevity and optimal performance of your VXE Dragonfly R1 mouse, follow these maintenance guidelines:
- Cleaning: The mouse features a "Delicate Ice Feeling Coating" or "Scrub feel" finish, which is designed to be dirt-resistant and easy to clean. Use a soft, dry cloth to wipe down the mouse regularly. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the mouse.
- Battery Care: Charge the mouse using the provided Type-C cable when the battery is low. Avoid completely draining the battery frequently to prolong its lifespan.
- Storage: When not in use for extended periods, store the mouse in a cool, dry place away from direct sunlight and extreme temperatures.
- Receiver Protection: Keep the 2.4G wireless receiver in a safe place to prevent loss or damage.
6. Troubleshooting
If you encounter any issues with your VXE Dragonfly R1 mouse, please refer to the following common troubleshooting steps:
- Mouse Not Responding:
- Ensure the mouse is charged. Connect it via the Type-C cable to charge and check if it works in wired mode.
- For 2.4G wireless, ensure the receiver is properly inserted and the mouse is in 2.4G mode. Try a different USB port.
- For Bluetooth, ensure the mouse is in Bluetooth mode and correctly paired with your device. Try re-pairing.
- Check the power switch on the bottom of the mouse to ensure it is turned ON.
- Intermittent Connection/Lag:
- Ensure the 2.4G receiver is not obstructed and is close to the mouse. Use the receiver extender if available.
- Minimize interference from other wireless devices (e.g., Wi-Fi routers, other 2.4GHz devices).
- Update mouse drivers via the VHUB-Station Management software.
- DPI/Button Issues:
- Ensure the VHUB-Station Management software is installed and updated.
- Check your custom settings within the VHUB software. Try resetting to default settings if issues persist.
- Physical Damage:
- Avoid dropping the mouse or exposing it to liquids. Physical damage is not covered under warranty.
If these steps do not resolve your issue, please contact customer support for further assistance.
7. Specifications
The VXE Dragonfly R1 series offers various models with distinct specifications. Refer to the table below for detailed parameters.
| Product Name | Model | Dimensions (L*W*H) | Coating | Sensor | Solution | Transmission Technology | Rate of Return | Battery | Continuous Battery Life (1000Hz) | Weight | Primary Key Jog | Roller | Foot Stickers | Connection Mode | Receiver |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VXEDragonflyR1 Series | R1 Star Flash Edition | 120.6mm * 64.0mm * 37.8mm | None | PAW 3395 SE | Heath Star Flash Programme | Smart Speed X Wireless | Wired/Wireless 125~2000Hz (Double 1K) | 520mAh | 150h | 53g±3 | Ring Nuo Blue through V2 | FSWITCH E10 roller | PTFE Fast Foot Sticker | Wired/Star/Bluetooth | Standard receiver (default 1K return) |
| R1 SE | None | Shanghai Botong High Match | 250mAh | 35h | 51g | Ring Nuo 20 million times | Wired/2.4G/Bluetooth | ||||||||
| R1 SE+ | None | Shanghai Botong High Match | 500mAh | 70h | 55g | Ring Nuo Ice Berry Powder Dot | Wired/2.4G/Bluetooth | ||||||||
| R1 | None | Shanghai Botong High Match | 250mAh | 40h | 51g | Ring Nuo Ice Berry Powder Dot | Wired/2.4G/Bluetooth | ||||||||
| R1 PRO | Super Fine Ice Feeling Coating | PAW 3395 | Nordic 52840 | 125~4000Hz (More than 1K requires 2K/4K receiver) | 250mAh | 75h | 48g | Kaihua White Blade 0.1 billion Times | Kaihua GE Upgrade / TTC Silver Wheel | Wired/2.4G | |||||
| R1 PRO MAX | Super Fine Ice Feeling Coating | 500mAh | 150h | 54g |
Compatible Systems: Windows, macOS, Linux, Chrome OS
8. Warranty and Support
Your VXE Dragonfly R1 Nearlink Gaming Mouse comes with a manufacturer's warranty. Please refer to the warranty voucher included in your package for specific terms and conditions.
- Free Returns: Enjoy free returns within 90 days of purchase.
- Security & Privacy: Your personal details are protected and not shared with third parties without your consent. Payments are secure.
- Customer Support: For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer's customer support.
