Lifeplus WFP-26

Contents

Lifeplus 26" 1500-Watt Electric Fireplace Heater

Model: WFP-26 | Brand: Lifeplus

Introduction

Thank you for choosing the Lifeplus 26-inch Electric Fireplace Heater. This appliance offers both aesthetic appeal and practical heating, designed for either freestanding placement or wall-mounted installation. It features adjustable heat settings, realistic flame effects with multiple colors and brightness levels, and convenient remote control operation. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

  • Read all instructions before using this heater.
  • This appliance is ETL certified, ensuring it meets recognized safety standards.
  • The fireplace is equipped with a Safety Thermal Cutoff feature to prevent overheating. If the unit overheats, it will automatically shut off. Unplug the unit and allow it to cool before restarting.
  • Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
  • Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and away from the sides and rear.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
Image depicting the overheat protection feature of the electric fireplace, with a thermometer indicating automatic shutdown.
Overheat Protection: The unit automatically shuts off if it gets too hot.

Package Contents

  • 1 × Wall Mounted Fireplace Insert Heater
  • 1 × Bag of Crystal Stones
  • 2 × Feet Bracket (for freestanding installation)
  • 1 × Remote Control
  • 1 × Owner's Manual

Specifications

FeatureSpecification
Brand NameLifeplus
ModelWFP-26
ColorBlack
Power1500/750W
Voltage120VAC/60hz
Heat SettingLow (750W) / High (1500W)
Heat TypeBlower Fan
Adjustable Flame Brightness5 Levels
Flame Color Options10 color combinations
Flames Operate IndependentlyYes
Safety Thermal CutoffYes
Overall Dimension (L x W x H)26 x 5 x 22.4 inches
CertificationETL
Installation TypeWall mounted / Freestanding
Technical diagram showing the overall dimensions of the electric fireplace: 26 inches (L) x 5 inches (W) x 22.4 inches (H).
Product Dimensions

Installation

The Lifeplus electric fireplace offers versatile installation options: freestanding or wall-mounted. Choose the method that best suits your space and preferences.

Diagram showing the electric fireplace installed as freestanding on the floor and wall-mounted on a wall.
Freestanding and Wall-Mounted Installation Options

Freestanding Installation

  1. Carefully unpack all components and ensure all parts listed in the 'Package Contents' section are present.
  2. Attach the two provided feet brackets to the bottom of the fireplace unit using the screws provided. Ensure they are securely fastened.
  3. Place the fireplace on a stable, level surface, ensuring adequate clearance from combustible materials (at least 3 feet from the front, sides, and rear).
  4. Plug the unit into a standard 120VAC/60Hz grounded outlet.

Wall-Mounted Installation

  1. Carefully unpack all components. Ensure the feet brackets are not attached for wall mounting.
  2. Choose a suitable wall location. Ensure the wall can support the weight of the fireplace and that there is a grounded electrical outlet nearby. Avoid mounting directly below a television or other heat-sensitive electronics.
  3. Mark the desired mounting height on the wall. Ensure the unit is level.
  4. Install the wall mounting bracket (not explicitly listed but implied for wall mount) to the wall using appropriate hardware for your wall type (e.g., studs, drywall anchors).
  5. Carefully lift the fireplace and hook it onto the installed wall mounting bracket. Ensure it is securely seated.
  6. Plug the unit into a standard 120VAC/60Hz grounded outlet.

Operating Instructions

Your Lifeplus electric fireplace can be operated using the control panel on the unit or the included remote control.

Lifeplus electric fireplace with remote control showing power, heat, flame, timer, and temperature buttons.
Electric Fireplace with Remote Control

Remote Control Functions

The remote control provides convenient access to all functions from a distance.

Diagram of the remote control buttons for the electric fireplace, including Power, Heater, Flame, Timer, Temp Up, and Temp Down.
Remote Control Button Layout
  • Power Button: Turns the fireplace ON or OFF.
  • Heater Button: Cycles through heat settings: Low (750W), High (1500W), and OFF.
  • Flame Button: Adjusts the flame color and brightness. Press repeatedly to cycle through 10 color combinations and 5 brightness levels. The flames can operate independently of the heat.
  • Timer Button: Activates and sets the automatic shut-off timer.
  • Temp Up Button: Increases the desired temperature setting for the digital thermostat.
  • Temp Down Button: Decreases the desired temperature setting for the digital thermostat.

Heating Settings

The fireplace features two heat settings: 750W for a lower heat output and 1500W for maximum warmth. The digital thermostat allows you to set a desired room temperature. The heater will automatically turn on or off to maintain this temperature, providing efficient heating.

Image illustrating the 3-second fast heating capability of the electric fireplace, showing warmth radiating.
3-Second Fast Heating
Image showing the electric fireplace in a bedroom setting, highlighting its digital thermostat for automatic temperature control.
Digital Thermostat Settings for automatic temperature control.

Flame Settings

Enhance the ambiance with realistic flame effects. The fireplace offers 10 distinct flame color combinations and 5 levels of flame brightness, ranging from a dim glow to a full, vibrant display. The flame effect can be used independently of the heating function.

Image displaying 10 different LED flame color effects available on the electric fireplace.
10 LED Flame Color Effects

Timer Function

Use the timer function to set the fireplace to automatically turn off after a specified period, providing convenience and energy saving.

Maintenance

Regular maintenance ensures the longevity and safe operation of your electric fireplace.

  • Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth to clean the exterior surfaces. Do not use abrasive cleaners or solvents.
  • Dust Removal: Periodically vacuum or wipe dust from the air intake and exhaust vents to ensure proper airflow.
  • Storage: If storing the fireplace for an extended period, unplug it and store it in a dry, dust-free location.
  • No User-Serviceable Parts: Do not attempt to open or repair the unit yourself. Refer all servicing to qualified service personnel.

Troubleshooting

If you experience issues with your electric fireplace, consult the following common problems and solutions:

ProblemPossible CauseSolution
Fireplace does not turn on.Unit is not plugged in, power outlet is not working, or circuit breaker tripped.Ensure the unit is securely plugged into a working outlet. Check your household circuit breaker.
No heat output.Heater function is off, temperature setting is too low, or overheat protection activated.Press the Heater button to turn on heat. Increase the temperature setting. If overheat protection activated, unplug and allow to cool for 10-15 minutes before restarting.
Flames are not visible.Flame function is off or brightness is set to minimum.Press the Flame button to activate the flame effect. Increase flame brightness.
Remote control not working.Batteries are dead or remote is out of range.Replace batteries in the remote control. Ensure you are within effective range and pointing the remote towards the fireplace.

User Tips

While no specific user tips were available from reviews or Q&A, here are some general recommendations for optimal use:

  • For best heating performance, ensure the fireplace is placed in an area with good air circulation and not obstructed by furniture or curtains.
  • Experiment with the different flame colors and brightness levels to find the perfect ambiance for any occasion.
  • Utilize the timer function to conserve energy, especially when using the heater before sleep.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.